Skip to main content
Log in

Micro arc oxidation and electrophoretic deposition effect on damping and sound transmission characteristics of AZ31B magnesium alloy

  • Published:
Journal of Central South University Aims and scope Submit manuscript

Abstract

Micro arc oxidation (MAO) and electrophoretic deposition (EPD) process are employed to fabricate a dense coating on magnesium alloy to protect it from corrosion in engineering application. The EPD film changes the damping characteristic of magnesium alloy, and both the MAO and EPD process change the bending stiffness of samples being treated. Damping loss factor (DLF) test and sound transmission experiments were carried out for AZ31B magnesium alloy with coating fabricated by MAO and EPD processes. The results indicate that DLF is improved in frequency range from 0–850 Hz. Bending stiffness of the samples is improved with MAO and EPD treatment. As a result, the sound transmission loss (L ST) is improved in the stiffness control stage of the sound transmission verse frequency curve. To the samples by electrophoresis process, the L ST is improved in frequency range from 2500–3200 Hz, because the damping loss factor is improved with EPD process. The results are useful for the surface treatment to enhance the damping loss factor, L ST and widespread application of magnesium alloy while improving the corrosion resistance.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. GRAY J E, LUAN B. Protective coatings on magnesium and its alloys-a critical review [J]. Journal of Alloys and Compounds. 2002, 336: 88–113.

    Article  Google Scholar 

  2. TANG Yu-ming, ZHAO Xu-hui, JIANG Kui-sheng, CHEN Jun, ZUO Yu. The influences of duty cycle on the bonding strength of AZ31B magnesium alloy by microarc oxidation treatment [J]. Surface & Coatings Technology, 2010, 205: 1789–1792.

    Article  Google Scholar 

  3. CHEN Fei, ZHOU Hai, YAO Bin, QIN Zhen, ZHANG Qing-feng. Corrosion resistance property of the ceramic coating obtained through microarc oxidation on the AZ31 magnesium alloy surfaces [J]. Surface & Coatings Technology, 2007, 201: 4905–4908.

    Article  Google Scholar 

  4. GU Xue-nan, ZHENG Yu-feng, CHENG Yan, ZHONG Sheng-ping, XI Ting-fei. In vitro corrosion and biocompatibility of binary magnesium alloys [J]. Biomaterials, 2009, 30: 484–498.

    Article  Google Scholar 

  5. HANZI A C, GERBER I, SCHINAMMER M, LOFFLER J F, UGGOWITZER P J. On the in vitro and in vivo degradation performance and biological response of new biodegradable Mg-Y-Zn alloys [J]. Acta Biomaterialia, 2010, 6: 1824–1833.

    Article  Google Scholar 

  6. ZHANG Shao-xiang, ZHANG Xiao-nong, ZHAO Chang-li, LI Jian-an, SONG Yang, XIE Chao-ying, TAO Hai-rong, ZHANG Yan, HE Yao-hua, JIANG Yao, BIAN Yu-jun. Research on an Mg-Zn alloy as a degradable biomaterial [J]. Acta Biomaterialia, 2010 (6): 626–640.

    Google Scholar 

  7. WANG Y M, GUO J W, SHAO Z K, ZHUANG J P, JIN M S, WU C J, WEI D Q, ZHOU Y. A metasilicate-based ceramic coating formed on magnesium alloy by microarc oxidation and its corrosion in simulated body fluid [J]. Surface and Coatings Technology, 2013, 219: 8–14.

    Article  Google Scholar 

  8. ZHANG Tao, CHEN Chong-mu, SHAO Ya-wei, MENG Guo-zhe, WANG Fu-hui, LI Xiao-gang, DONG Chao-fang. Corrosion of pure magnesium under thin electrolyte layers [J]. Electrochimica Acta, 2008, 53: 7921–7931.

    Article  Google Scholar 

  9. SONG G, ATRENS A. Corrosion mechanics of magnesium alloy [J]. Advanced Engineering Materials, 2003(5): 837–858.

    Google Scholar 

  10. CAI Qi-zhou, WANG Li-shi, WEI Bo-kang, LIU Quan-xin. Electrochemical performance of microarc oxidation films formed on AZ91D magnesium alloy in silicate and phosphate electrolytes [J]. Surface & Coatings Technology, 2006, 200: 3727–3733.

    Article  Google Scholar 

  11. SRINIVASAN P B, BLAWERT C, DIETZEL W. Effect of plasma electrolytic oxidation treatment on the corrosion and stress corrosion cracking behaviour of AM50 magnesium alloy [J]. Materials Science and Engineering A, 2008, 494: 401–406.

    Article  Google Scholar 

  12. CHANG Li-min. Growth regularity of ceramic coating on magnesium alloy by plasma electrolytic oxidation [J]. Journal of Alloys and Compounds, 2009, 468: 462–465.

    Article  Google Scholar 

  13. YANG Wei, JIANG Bai-ling, SHI Hui-ying, XIAN Lin-yun. Microstructure and corrosion resistance of composite coating on magnesium alloy by micro arc oxidation and electrophoresis [J]. Chinese Journal of Materials Research, 2009, 23: 421–425.

    Google Scholar 

  14. FAN Yong-zhong, SUN Kang, WU Ren-jie. Study of epoxy resin composites damping properties and its application to the noise reduction [J]. Journal of Materials Engineering, 2000(3): 29–35.

    Google Scholar 

  15. RAO M D. Recent applications of viscoelastic damping for noise control in automobiles and commercial airplanes [J]. Journal of Sound and Vibration, 2003, 262: 457–474.

    Article  Google Scholar 

  16. PATSIAS S, SAXTON C, SHIPTON M. Hard damping coatings: an experimental procedure for extraction of damping characteristics and modulus of elasticity [J]. Materials Science and Engineering A, 2004, 370: 412–416.

    Article  Google Scholar 

  17. ZHAO Yue-ying, SHENG Sheng-wo. Measurement of attenuation factors for damped vibration of thin-shell structures [J]. Journal of Tongji University, 2002, 30(7): 900–903. (in Chinese)

    Google Scholar 

  18. CHEN Xin-rui, HAO Zhi-yong, YANG Chen. Experimental study on damping performance of magnesium alloy AZ31 [J]. Journal of Zhejiang University (Engineering Science), 2010, 44(1): 19–22. (in Chinese)

    MathSciNet  Google Scholar 

  19. SALISSOU Y, PANNETON R. A general wave decomposition formula for the measurement of normal incidence sound transmission loss in impedance tube [J]. The Journal of the Acoustical Society of America, 2009(125): 2083.

    Google Scholar 

  20. GOLAS J, PODHORECKA A, DELYAVSKI M, KRAVCHUK M. On an approach to the solution of the bending problem for laminated plates [J]. Mechanics of Composite Materials, 2002, 38: 253–262.

    Article  Google Scholar 

  21. TAMBOLI S H, PURI R K, VIJAYA P. Adhesion and stress of magnesium oxide thin films: Effect of thickness, oxidation temperature and duration [J]. Applied Surface Science, 2010, 256: 4582–4585.

    Article  Google Scholar 

  22. LEE C M, XU Y. A modified transfer matrix method for prediction of transmission loss of multilayer acoustic materials [J]. Journal of Sound and Vibration, 2009, 326: 290–301.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Zhi Luo  (罗智).

Additional information

Foundation item: Project(2011BAE22B05) supported by National Technology R&D Program in the 12th Five year Plan of China; Project(2011DFA50900) supported by the Canada-China-USA Collaborative Research & Development Project; Project(51071121) supported by the National Natural Science Foundation of China

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Luo, Z., Hao, Zy., Jiang, Bl. et al. Micro arc oxidation and electrophoretic deposition effect on damping and sound transmission characteristics of AZ31B magnesium alloy. J. Cent. South Univ. 21, 3419–3425 (2014). https://doi.org/10.1007/s11771-014-2317-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11771-014-2317-5

Key words

Navigation