Abstract
Artificial bone with porous structure is crucial for tissue scaffold and clinic implants. Scaffold provides structure support for cells and guides tissues regeneration for final tissue structure. A computational aided process of porous bone modeling was developed which described the design and fabrication of tissue scaffolds by considering intricate architecture, porosity and pore size. To simulate intricate bone structure, different constructive units were presented. In modeling process, bone contour was gotten from computed tomography (CT) images and was divided into two levels. Each level was represented by relatively reconstructive process. Pore size distribution was controlled by using mesh generation. The whole hexahedral mesh was reduced by unit structure, when a 3D mesh with various hexahedral elements was provided. The simulation results show that constructive structure of porous scaffold can meet the needs of clinic implants in accurate and controlled way
Similar content being viewed by others
References
BOSE S, ROY M, BANDYOPADHYAY A. Recent advances in bone tissue engineering scaffolds [J]. Trends in Biotechnology, 2012, 30(10): 546–554.
SAMAR J K. Development of controlled porosity polymer ceramic composite scaffolds via fused deposition modeling [J]. Materials Science and Engineering, 2003, 23: 611–620.
OLIVARES A L, MARSAL E L, PLANELL J A, LACROIX D. Finite element study of scaffold architecture design and culture conditions for tissue engineering [J]. Biomaterials, 2009, 30: 6142–6149.
DUBEY G, MEQUANINT K. Conjugation of fibronectin onto three-dimensional porous scaffolds for vascular tissue engineering applications [J]. Acta Biomaterialia, 2011, 7: 1114–1125.
FRANCIS E H, TAY M A. CASD/CASM method for prosthetic socket fabrication using the FDM technology [J]. Rapid Prototyping Journal, 2002, 8(4): 258–262
SARMENT D P, SUKOVIC P, CLINTHORNE N. Accuracy of implant placement with a stereolithographic surgical guide [J]. The International Journal of Oral & Maxillofacial Implants, 2003, 18(4): 571–577.
GIMBLE J M, GUILAK F, BUNNELL B A. Clinical and preclinical translation of cellbased therapies using adipose tissue-derived cells [J]. Stem Cell Research & Therapy, 2010, 1(2): 19–21.
SCHAFFLER A, BUCHLER C. Concise review: Adipose tissue-derived stromal cells-basic and clinical implications for novel cell-based therapies [J]. Stem Cells, 2007, 25: 818–827.
FROHLICH M, GRAYSON W L, MAROLT D, GIMBLE J M, KREGAR-VELIKONJA N, VUNJAK-NOVAKOVIC G. Bone grafts engineered from human adipose-derived stem cells in perfusion bioreactor culture [J]. Tissue Eng A, 2010, 16: 179–189.
GOPAKUMAR S. RP in medicine: A case study in cranial reconstructive surgery [J]. Rapid Prototyping Journal, 2004, 10(3): 207–211.
LEONG K F, CHUA C K, SUDARMADJI N. Engineering functionally graded tissue engineering scaffolds [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2008, 1(2): 140–152.
LICKORISH D, GUAN L, DAVIES J E. A three-phase, fully restorable, polyester/calcium phosphate scaffold for bone tissue engineering [J]. Biomaterials, 2007, 28: 1495–502.
SEN S, GULER M S, GULER C. Stress distributions on crown-luting cement-substrate system with finite element method [J]. Journal of Central South University, 2012, 19(8): 2115–2124.
ADACHI T, OSAKO Y, TANAKA M, HOJO M, HOLLISTER S J. Framework for optimal design of porous scaffold microstructure by computational simulation of bone regeneration [J]. Biomaterials, 2006, 27: 3964–3972.
CRISTINA C, SARINDR B, YAN L P. Development of silk-based scaffolds for tissue engineering of bone from human adipose-derived stem cells [J]. Acta Biomaterialiaialia, 2012, 8: 2483–2492.
YAN L P, OLIVEIRA J M, OLIVEIRA A L, CARIDADE S G, MANO J F, REIS R L. Macro/micro porous silk fibroin scaffolds with potential for articular cartilage and meniscus tissue engineering applications [J]. Acta Biomaterialia, 2012, 8: 289–301.
HUTMACHER D W. Scaffolds in tissue engineering bone and cartilage [J]. Biomaterials, 2000, 21: 2529–2543.
REZWAN K, CHEN Q Z, BLAKER J J, BOCCACCINI A R. Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering [J]. Biomaterials, 2006, 27: 3413–3431.
CAI Sheng-yong, XI Jun-tong. Computer modeling approach for a porous scaffold structure in tissue engineering based on the shapefunction control [J]. Computer-Aided Design, 2008, 40: 1040–1050.
SCHROEDER C, REGLI W C, SUN W. Computer-aided design of porous artifacts [J]. Computer-Aided Design, 2005, 37: 339–353.
WILLIAMS J M. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering [J]. Biomaterials, 2005, 26: 4817–4827.
HIEU L C, BOHEZ E, SLOTEN J V, PHIEN H N, VATCHARAPORN E, BINH P H, AN P V, ORIS P. Design for medical rapid prototyping of cranioplasty implants [J]. Rapid Prototyping Journal, 2003, 9(3): 175–186.
RUSS J, MICHAEL G. Mandible reconstruction project [J]. Imaging Technology, 2003, 34(9): 20–27.
LIU Ya-xiong, LI Di-chen. The customized mandible substitute based on rapid prototyping [J]. Rapid Prototyping Journal, 2003, 9(3): 167–174.
YAN Yong-nian, LIU Hai-xia, LI Sheng-jie. Bio-manufacture developing and future [J]. Journal of China Science Fund, 2007(2): 65–68. (in Chinese)
SANZ-HERRERA J A, GARCIA-AZNAR J M, DOBLARE M. On scaffold designing for bone regeneration: A computational multiscale approach [J]. Acta Biomaterialia, 2009, 5: 219–229.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Project(2011DFB70230)supported by State International Cooperation Program of China; Project(N110403003) supported by Basic Research Foundation of Education Ministry of China
Rights and permissions
About this article
Cite this article
Li, H., Yang, Jy., Su, Pc. et al. Computer aided modeling and pore distribution of bionic porous bone structure. J. Cent. South Univ. 19, 3492–3499 (2012). https://doi.org/10.1007/s11771-012-1434-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-012-1434-2