Abstract
Laser assisted turning (LAT) is one of the advanced machining technologies, which uses laser power to heat the surface of a workpiece before the material is removed. It has several advantages of low manufacturing costs, high productivity and high qualities to machine difficult-to-cut materials such as silicon nitride, mullite, zirconia and Ni. A large part of studies on LAT have been focused on a round bar. With increasing demands for high quality products and high performance engineering system, the researches on LAT for clover and square section members are necessary. But, these workpieces are impossible to be machined on conventional CNC lathe and to generate NC code with current CAM softwares. As a basic research for combining LAT with a tilting index table type 5-axis machining center, i.e. laser assisted turn-mill, a new method is suggested to generate NC code that can process various types of clover and square section members through development of C++ program.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
REBRO P A, SHIN Y C, INCROPERA F P. Design operating conditions for crackfree laser-assisted machining of mullite [J]. International Journal of Machine Tools & Manufacture, 2004, 44: 677–694.
MUN S D. Micro machining of high-hardness materials using magnetic abrasive grains [J]. International Journal of Precision Engineering and Manufacturing, 2010, 11(5): 763–770.
KIM J D, LEE S J, SUH J. Characteristics of laser assisted machining for silicon nitride ceramic according to machining parameters [J]. International Journal of Precision Engineering Manufacturing, 2011, 25(4): 995–100.
LIM S H, LEE J H, SHIN D S, KIM J D, KIM J H. A study on laser-assisted machining process of silicon nitride [J]. Journal of the Korean society for Precision Engineering, 2009, 26(5): 48–56.
KIM K S, KIM J H, CHOI J Y, LEE C M. A review on research and development of laser assisted turning [J]. International Journal of Precision Engineering and Manufacturing, 2011, 12(4): 753–759.
MOOLA M R, GORIN A, HOSSEIN K A. Optimization of various cutting parameters on the surface roughness of the machinable glass ceramic with two flute square end mills of micro grain solid carbide [J]. International Journal of Precision Engineering and Manufacturing, 2012, 13(9): 1549–1554.
CHANG C W, KUO C P. An investigation of laser-assisted machining of Al2O3 [J]. International Journal of Machine Tools & Manufacture, 2007, 47: 452–461.
JEON M K, KIM W B, HAN G C, NA S J. A study on analysis of heat flow in laser brazing [J]. The Korean Welding and Joining Society, 1995, 9: 96–105. (in Korean)
PFEFFERKORN F E, LEI S, JEON Y H, HADDAD G. A metric for defining the energy efficiency of thermally assisted machining [J]. International Journal of Machine Tools & Manufacture, 2009, 49: 357–365.
MELKOTE S, KUMAR M, HASHIMOTO F, LAHOTI G. Laser Assisted micro-milling of hard-to-machine materials [J]. International Journal of Machine Tools & Manufacture, 2009, 58: 45–48.
KUAR A S, DOLOI B, BHATTACHARYYA B. Modelling and analysis of pulsed Nd:YAG laser machining characteristics during micro-drilling of zirconia (ZrO2) [J]. International Journal of Machine Tools & Manufacture, 2006, 46: 1301–1310.
NOH J H, SUH J, SOHN H K, SHIN D S, LEE J H. Fabrication of superhydrophbic mold surface using laser ablation [C]// Proceedings of KSPE 2008 Spring Conference. Jeju, Korea: 2008: 791–792.
KIM S W, YANG C J. Magnetic properties of SmCo thin films grown by using a Nd:YAG pulsed ablation method [J]. Journal of Korean Magnetics Society, 2000, 10(1): 31–36. (in Korean)
KIM J H, CHOI J Y, LEE C M. Thermal analysis for laser assisted turning of square bar using laser heat source projection method [J]. Journal of the Korean Society for Precision Engineering, 2011, 28(12): 1353–1358. (in Korean)
PARK J M, RHO H M. Automatic generation of NC-code using feature data and process planning data [C]// Proceedings of KSPE 2002 Autumn Conference. Seoul, Korea, 2002: 591–594.
LEE H U, KO J H, CHO D W. NC code optimization based on an improved cutting force model [C]// Proceedings of KSPE 2001 Autumn Conference. Suwon, Korea: 2001: 37–42.
CHOI B G, JUN C S, YOO W S, PYUN Y S, JUNG Y C. CAD/CAM system and CNC cut processing [M]. SciTech Media, 2001: 198–199.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Project(2011-0017407) supported by the National Research Foundation of Korea (NRF) funded by Korea government (MEST)
Rights and permissions
About this article
Cite this article
Choi, Jy., Lee, Cm. NC code generation for laser assisted turn-mill of various type of clovers and square section members. J. Cent. South Univ. 19, 3064–3068 (2012). https://doi.org/10.1007/s11771-012-1379-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-012-1379-5