Abstract
A high-performance porous carbon material for supercapacitor electrodes was prepared by using a polymer blend method. Phenol-formaldehyde resin and gelatin were used as carbon precursor polymer and pore former polymer, respectively. The blends were carbonized at 800 °C in nitrogen. SEM, BET measurement and BJH method reveal that the obtained carbon possesses a mesoporous characteristic, with the average pore size between 3.0 nm and 5.0 nm. The electrochemical properties of supercapacitor using these carbons as electrode material were investigated by cyclic voltammetry and constant current charge-discharge. The results indicate that the composition of blended polymers has a strong effect on the specific capacitance. When the mass ratio of PF to gelatin is kept at 1:1, the largest surface area of 222 m2/g is obtained, and the specific capacitance reaches 161 F/g.
Similar content being viewed by others
References
WANG Da-wei, LI Feng, LIU Min. 3D aperiodic hierarchical porous graphitic carbon material for high-rate electrochemical capacitive energy storage [J]. Angewandte Chemie, 2007, 120(2): 379–382.
FANG Jing, CUI Mu, LU Hai. Hybrid supercapacitor based on polyaniline doped with lithium salt and activated carbon electrodes [J]. Journal of Central South University of Technology, 2009, 16(3): 434–439.
KIM Y J, HORIE Y, MATSUZAWA Y. Structural features necessary to obtain a high specific capacitance in electric double layer capacitors [J]. Carbon, 2004, 42(12/13): 2423–2432.
XU Bin, WU Feng, CHEN Ren-jie. Mesoporous activated carbon fiber as electrode material for high-performance electrochemical double layer capacitors with ionic liquid electrolyte [J]. Journal of Power Sources, 2010, 195(7): 2118–2124.
LIU Ye-xiang, LI Jing, LAI Yan-qing. Preparation and properties of pitch carbon based supercapacitor [J]. Journal of Central South University of Technology, 2007, 14(5): 601–606.
LOZANO-CASTELLO D, CAZORLA-AMOROS D, LINARES-SOLANO A. Influence of pore structure and surface chemistry on electric double layer capacitance in non-aqueous electrolyte [J]. Carbon, 2003, 41(9): 1765–1775.
QIAO W, YOON S H, MOCHIDA I. KOH activation of needle coke to develop activated carbons for high-performance EDLC [J]. Energy & Fuels, 2006, 20(4): 1680–1684.
SALITRA G, SOFFER A, ELIAD L. Carbon electrodes for double-layer capacitors I. Relations between ion and pore dimensions [J]. Journal of the Electrochemical Society, 2000, 147: 2486–2493.
ELIAD L, SALITRA G, SOFFER A. Ion sieving effects in the electrical double layer of porous carbon electrodes: Estimating effective ion size in electrolytic solutions [J]. J Phys Chem B, 2001, 105(29): 6880–6887.
CHANG Kai-wen, LIM Zheng-yi, DU Fang-yi. Synthesis of mesoporous carbon by using polymer blend as template for the high power supercapacitor [J]. Diamond and Related Materials, 2009, 18(2/3): 448–451.
PATEL N, OKABE K, OYA A. Designing carbon materials with unique shapes using polymer blending and coating techniques [J]. Carbon, 2002, 40(3): 315–320.
KATSUYA F, YOSHIKIYO H, TATSURO H. Estimation of pore structures in carbon fibers prepared from polymer blends during carbonization by small-angle X-ray scattering [J]. Carbon, 2008, 46(4): 722.
SUBRAMANIA A, KALYANA SUNDARAM N T, VIJAYA KUMAR G. Structural and electrochemical properties of micro-porous polymer blend electrolytes based on PVdF-co-HFP-PAN for Li-ion battery applications [J]. Journal of Power Sources, 2006, 153(1): 177–182.
YAMAZAKI M, KAYAMA M, IKEDA K. Nanostructured carbonaceous material with continuous pores obtained from reaction-induced phase separation of miscible polymer blends [J]. Carbon, 2004, 42(8/9): 1641–1649.
DENISA H J, MYKOLA S, GAO Q L. Combined effect of nitrogen- and oxygen-containing functional group of microporous activated carbon on its electrochemical performance in supercapacitors [J]. Advanced Functional Materials, 2009, 19(3): 438–447.
ODA H, YAMASHITA A, MINOURA S. Modification of the oxygen-containing functional group on activated carbon fiber in electrodes of an electric double-layer capacitor [J]. Journal of Power Sources, 2006, 158(2): 1510–1516.
CENTENO T A, STOECKLI F. The role of textural characteristics and oxygen-containing surface groups in the supercapacitor performances of activated carbons [J]. Electrochimica Acta, 2006, 52(2): 560–566.
ZHANG Chuan-xiang, LONG Dong-hui, XING Bao-lin. The superior electrochemical performance of oxygen-rich activated carbons prepared from bituminous coal [J]. Electrochemistry Communications, 2008, 10(11): 1809–1811.
RAYMUNDO-PIÑERO E, LEROUX F, BEGUIN F. A high performance carbon for supercapacitors obtained by carbonization of a seaweed biopolymer [J]. Advanced Materials, 2006, 18(14): 1877–1882.
MORIGUCHI I, NAKAWARA F, YAMADA H. Electrical double-layer capacitive properties of colloidal crystal templated nanoporous carbons [J]. Stud Surf Sci Catal, 2005, 156: 589–594.
SHI H. Activated carbons and double layer capacitance [J]. Electrochimica Acta, 1996, 41(10): 1633–1639.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Projects(50772033, 50972043) supported by the National Natural Science Foundation of China; Project(09JJ3095) supported by the Natural Science Foundation of Hunan Province, China; Project(09A001) supported by the Scientific Research Fund of Hunan Provincial Education Department, China; Project(2010FJ3151) supported by the Science and Research Plan of Hunan Province, China; Project supported by the Science and Technology Innovative Research Team in Higher Education Institution of Hunan Province, China
Rights and permissions
About this article
Cite this article
Yi, B., Chen, Xh., Liu, Yq. et al. High-performance porous carbon for supercapacitors prepared by one-step pyrolysis of PF/gelatin blends. J. Cent. South Univ. Technol. 19, 41–45 (2012). https://doi.org/10.1007/s11771-012-0970-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-012-0970-0