Abstract
The soil masses of slopes were assumed to follow a nonlinear failure criterion and a nonassociated flow rule. The stability factors of slopes were calculated using vertical slice method based on limit analysis. The potential sliding mass was divided into a series of vertical slices as well as the traditional slice technique. Equating the external work rate to the internal energy dissipation, the optimum solutions to stability factors were determined by the nonlinear programming algorithm. From the numerical results, it is found that the present solutions agree well with previous results when the nonlinear criterion reduces to the linear criterion, and the nonassociated flow rule reduces to the associated flow rule. The stability factors decrease by 39.7% with nonlinear parameter varying from 1.0 to 3.0. Dilation and nonlinearity have significant effects on the slope stability factors.
Similar content being viewed by others
References
AGAR J G, MORGENSTERN N R, SCOTT J. Shear strength and stress-strain behavior of Athabasca oil sand at elevated temperatures and pressure [J]. Canadian Geotechnical Journal, 1985, 24(1): 1–10.
BAKER R, FRYDMAN S. Upper bound limit analysis of soil with nonlinear failure criterion [J]. Soils and Foundations, 1983, 23(4): 34–42.
ZHANG X J, CHEN W F. Stability analysis of slopes with general nonlinear failure criterion [J]. International Journal for Numerical and Analytical Methods in Geomechanics, 1987, 11(1): 33–50.
DRESCHER A, CHRISTOPOULOS C. Limit analysis slope stability with nonlinear yield condition [J]. International Journal for Numerical and Analytical Methods in Geomechanics, 1988, 12(4): 341–345.
CHEN W F. Limit analysis and soil plasticity [M]. Amsterdam: Elsevier Scientific Company, 1975.
GOODMAN R E. Introduction to rock mechanics [M]. 2nd ed. New York: John Wiley & Sons, 1989.
FREDLUND D G, RAHARDJO H. Soil mechanics for unsaturated soils [M]. New York: John Wiley & Sons, 1994.
YANG Xiao-li, LI Liang, YIN Jian-hua. Stability analysis of rock slopes with a modified Hoek-Brown failure criterion [J]. International Journal for Numerical and Analytical Methods in Geomechanics, 2004, 28(2): 181–190.
YANG Xiao-li, YIN Jian-hua. Slope stability analysis with nonlinear failure criterion [J]. Journal of Engineering Mechanics, 2004, 130(3): 267–273.
YANG Xiao-li, LI Liang, YIN Jian-hua. Seismic and static stability analysis for rock slopes by a kinematical approach [J]. Geotechnique, 2004, 54(8): 543–549.
DRESCHER A, DETOURNAY C. Limit load in translational failure mechanisms for associative and non-associative materials [J]. Geotechnique, 1993, 43(3): 443–456.
WANG Y J, YIN J H, LEE C F. The influence of a non-associated flow rule on the calculation of the factor of safety of the soil slopes [J]. International Journal for Numerical and Analytical Methods in Geomechanics, 2001, 25(13): 1351–1359.
ZHANG Ga, ZHANG Jian-min. Reversible and irreversible dilatancy of soil-structure interface [J]. Rock and Soil Mechanics, 2005, 26(5): 699–704. (in Chinese)
SIMONI A, HOULSBY G T. The direct shear strength and dilatancy of sand-gravel mixtures [J]. Geotechnical and Geological Engineering, 2006, 24(3): 523–549.
MICHALOWSKI R L. Slope stability analysis: A kinematical approach [J]. Geotechnique, 1995, 45(2): 283–293.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Project (200550) supported by the Foundation for the Author of National Excellent Doctoral Dissertation of China; Project (200631878557) supported by West Traffic of Science and Technology of China
Rights and permissions
About this article
Cite this article
Yang, Xl., Huang, F. Slope stability analysis considering joined influences of nonlinearity and dilation. J. Cent. South Univ. Technol. 16, 292–296 (2009). https://doi.org/10.1007/s11771-009-0050-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-009-0050-2