Skip to main content
Log in

Structural characteristics and properties of polyurethane modified TDE-85/MeTHPA epoxy resin with interpenetrating polymer networks

  • Published:
Journal of Central South University of Technology Aims and scope Submit manuscript

Abstract

Diglycidyl-4, 5-epoxycyclohexane-1, 2-dicarboxylate(TDE-85)/methyl tetrahydrophthalic anhydride (MeTHPA) epoxy resin was modified with polyurethane(PU) and the interpenetrating polymer networks(IPNs) of PU-modified TDE-85/MeTHPA resin were prepared. The structural characteristics and properties of PU-modified TDE-85/MeTHPA resin were investigated by Fourier transform infrared(FTIR) spectrum, emission scanning electron microscopy(SEM) and thermogravimetry(TG). The results indicate that epoxy polymer network (I) and polyurethane polymer network (II) of the modified resin can be obtained and the networks (I) and (II) interpenetrate and tangle highly each other at the phase interface. The micro morphology presents heterogeneous structure. The integrative properties of PU-modified TDE-85/MeTHPA epoxy resin are improved obviously. The PU-modified TDE-85/MeTHPA resin’s tensile strength reaches 69.39 MPa, the impact strength reaches 23.56 kJ/m, the temperature for the system to lose 1% mass (t 1%) is 300 °C, and that for the system to lose 50% mass (t 50%) is 378 °C. Compared with those of TDE-85/MeTHPA resin, the tensile strength, impact strength, t 1% and t 50% of the PU-modified resin increases by 48%, 115%, 30 °C, 11 °C, respectively. The PU-modified TDE-85/MeTHPA resin has the structure characteristics and properties of interpenetrating polymer networks.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. LI Gui-lin. Epoxy resin and epoxy coatings [M]. Beijing: Chemical Industry Press, 2003: 73–75. (in Chinese)

    Google Scholar 

  2. ZHANG Chun-hua, HAN Bing, HUANG Yu-dong. Study on properties of TDE-85/aromatic diamine matrix and carbon fiber composites [J]. Journal of Harbin University of Science and Technology, 2000, 5(5): 60–63. (in Chinese)

    Google Scholar 

  3. HE Shang-jin, SHI Ke-yu, BAI Jie. Studies on the properties of epoxy resins modified with chain-extended ureas [J]. Polymer, 2001, 42(23): 9641–9647.

    Article  Google Scholar 

  4. CHEN C H, CHEN M H. Synthesis, thermal properties, and morphology of blocked polyurethane/epoxy full-interpenetrating polymer network [J]. Journal of Applied Polymer Science, 2006, 100(1): 323–328.

    Article  Google Scholar 

  5. XIE Hong-quan, GUO Jun-shi. Room temperature synthesis and mechanical properties of two kinds of elastomeric interpenetrating polymer networks based on castor oil [J]. European Polymer Journal, 2002, 38(11): 2271–2277.

    Article  Google Scholar 

  6. KRISHNAN S M. Studies on corrosion resistant properties of sacrificial primed IPN coating systems in comparison with epoxy-PU systems [J]. Progress in Organic Coatings, 2006, 57(4): 383–391.

    Article  Google Scholar 

  7. JIA Qing-ming, ZHENG Mao-sheng, CHEN Hong-xiang, SHEN Ren-jie. Morphologies and properties of polyurethane/epoxy resin interpenetrating network nanocomposites modified with organoclay [J]. Materials Letters, 2006, 60(9/10): 1306–1309.

    Article  Google Scholar 

  8. BHUNIYA S, ADHIKARI B. Toughening of epoxy resins by hydroxy-terminated, silicon-modified polyurethane oligomers [J]. Journal of Applied Polymer Science, 2003, 90(6): 1497–1506.

    Article  Google Scholar 

  9. CHEN Chin-hsing, SUN Yun-yun. Mechanical properties of blocked polyurethane/epoxy interpenetrating polymer networks [J]. Journal of Applied Polymer Science, 2006, 101(3): 1826–1832.

    Article  Google Scholar 

  10. LI Jin-bo. High performance epoxy resin nanocomposites containing both organic montmorillonite and castor oil-polyurethane [J]. Polymer Bulletin, 2006, 56(4/5): 377–384.

    Article  Google Scholar 

  11. MA Xiao-yan, YUAN Li, JIA Qiao-ying. Composites of epoxy resin and BMIPBA reinforced with aluminum borate whiskers [J]. Journal of Materials Science and Engineering, 2003, 21(6): 789–792. (in Chinese)

    Google Scholar 

  12. JIANG Li-xiang, SHENG Lei, CHEN Ping. Study on effect of proton irradiation on epoxy resin 648 and TDE-85 [J]. Spacecraft Environment Engineering, 2006, 23(3): 134–137. (in Chinese)

    Google Scholar 

  13. JI Ke-jian, LIU Yuan-jun, ZHANG Yin-sheng. NMR characterization of epoxy resin [J]. Thermosetting Resin, 2000, 15(1): 9–12. (in Chinese)

    Google Scholar 

  14. WEN Qing-zhen, ZHU Jin-hua, WANG Yuan-sheng. The influence of chain extenders on the reaction rate of polyether-urethane prepolymers [J]. Journal of Naval University of Engineering, 2003, 15(1): 23–26. (in Chinese)

    Google Scholar 

  15. LI Zhi-hua, KE Yu-peng, REN Dong-yan, ZHENG Zi-qiao. Structural characteristics and properties of PU-modified TDE-85/MeTHPA epoxy resin [J]. Journal of Central South University of Technology, 2007, 14(6): 753–758.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Zhi-hua Li  (李芝华).

Additional information

Foundation item: Project(2003AA84ts04) supported by the National High-Tech Research and Development Program of China

Rights and permissions

Reprints and permissions

About this article

Cite this article

Li, Zh., Huang, Yp., Ren, Dy. et al. Structural characteristics and properties of polyurethane modified TDE-85/MeTHPA epoxy resin with interpenetrating polymer networks. J. Cent. South Univ. Technol. 15, 305–308 (2008). https://doi.org/10.1007/s11771-008-0057-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11771-008-0057-0

Key words

Navigation