Abstract
As a new spraying technology used in the remanufacturing engineering, electro-thermal explosion spraying holds a lot of advantages. Electro-thermal explosion spraying coating aliquation phenomena are reduced and non-crystal, micro-crystal and millimicron-crystal and other microstructure are formed. The corrosion-resistance ability of electro-thermal explosion spraying coating in high temperature environment was surveyed respectively. SEM equipped with EDS was employe to analyzed the microstructure of spraying coating before and after corrosion. The corrosion-resistance mechanism of the spraying coating was discussed.
Similar content being viewed by others
References
XU B S. Nano Surface Engineering [M]. Beijing: Chemical Industry Press, 2004. (in Chinese)
Liu Z D, An J Y, Yang K. Studies on rapid spraying by electric explosion method [J]. Explosion and Shock Waves, 2001, 21(1): 17–20. (in Chinese)
Liu Z D, Feng S P, Zhang N. Studies on high heating rates apparatus [J]. Explosion and Shock Waves, 1995, 15(4): 315–321. (in Chinese)
Liu Z D, Yang K, Duan P, et al. An experimental study on preparation of WC-Co coatings with the exploding wires technique [J]. Explosion and Shock Waves, 2003, 23(2): 116–121. (in Chinese)
Toma D, Brandl W, Marginean G. Wear and corrosion behaviour of thermally sprayed cermet coatings [J]. Surface and Coatings Technology, 2001, 2: 149–158.
Tamura H. Generation of a high velocity jet in the electrothermalexplosion of conductive ceramic powders [J]. J Thermal Spray Technology, 1998, 7(1): 87–92.
Li M J, Sun X F, Guan H R. High temperature oxidation behavior of (Ni, Pd)Al coating [J]. Acta Met-allurgica Sinica, 2003, 39(4): 439–443. (in Chinese)
Saravanan P, Selvarajan V. Application of taguchi method to the optimization of detonation spraying process [J]. Materials and Manufacturing Processes, 2000, 15(1): 139–153.
Li Y S, Niu Y, Wu W T. Chlorination of metallic materials at high temperature [J]. Corrosion Science and Protection Technology, 2000, 12(1): 41–44. (in Chinese)
Su Y L, Lin J S. Friction and wear behavior of a number of ceramic-coated steels matched as sliding pairs to various surface-treated steels [J]. Wear, 1993, 166: 27–35.
Simms M J, Newton R, Norton J F, et al. Degradation of Fe-Cr-Al-RE and Ni-Cr-Al-RE foils in air and combustion gas atmospheres [J]. Materials at High Temperatures, 2003, 20(3): 439–451.
Wu Y N, Wang F H, Hua W G, et al. Oxidation behavior of thermal barrier coatings obtained by detonation spraying [J]. Surface and Coatings Technology, 2003, 166: 189–194.
Wang F, Geng S. High temperature oxidation and corrosion resistant nanocrystalline coatings [J]. Surface Engineering, 2003, 19(1): 32–36. (in Chinese)
Wang H B, Li M S, Han Z. High temperature corrosion mechanism for smoke pipe of ship [J]. Materials Protection, 2002, 35(9): 7–9. (in Chinese)
Li M S. High Temperature Corrosion of Metal [M]. Beijing: Metallurgical Industry Press, 2001. (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Project(2003AA331130) supported by the Hi-tech Research and Development Program of China
Rights and permissions
About this article
Cite this article
Wei, Sc., Xu, Bs., Wang, Hd. et al. High-temperature corrosion-resistance performance of electro-thermal explosion spraying coating. J Cent. South Univ. Technol. 12, 195–198 (2005). https://doi.org/10.1007/s11771-005-0039-4
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11771-005-0039-4