Abstract
The uniform experiment design is an effective way of optimizing technology scheme for refining the grain size during multistage deformation. In this paper, it is adopted to evaluate the effect of each technology parameter on final grain size of AISI H13 hot-work tool steel during multistage deformation. It has been verified that the technology scheme for refining the final grain size can be determined rapidly and efficiently with the aid of the uniform design. The results show that the deformation parameters and the intermission time after deformation of the first stage affect the final grain size remarkably. For AISI H13 hot-work tool steel, the final grain size can be refined notably when deformation parameters for the first stage are set as follows: a deformation temperature range of 1 025–1 085 °C; a true strain of above 0.26 and the interpass time between the first and the second stage of deformation less than 10 s.
Similar content being viewed by others
References
HOU Huo-ran. Progress in research of ferrite grain refinement in low alloyed steel[J]. Iron and Steel (in Chinese), 1999, 34(5): 71–74.
LIU Qing-you, Hou Huo-ran. Control rolling of ultrafine structure in low alloy steel[J]. Journal of Iron and Steel Research (in Chinese), 2000, 12(6): 29–32.
Senuma T H, Kameda M, Suehiro M. Influence of hot rolling and cooling conditions on the grain refinement of hot rolled extra low carbon steel bands[J]. ISIJ International, 1998, 38(6): 587–594.
Venkatewarlu K, Murty B S, and Chakraborty M. Effect of hot rolling and heat treatment of Al-5Ti-1B mater alloy on the grain refining efficiency of aluminum[J]. Materials Science and Engineering (A), 2001, 301(2): 180–186.
Torizuka S, Umezawa O, Tsuzaki K, et al. Refinement of ferrite-pearlite structures through transformation from heavily deformed austenite in a low carbon Si-Mn steel[J]. Materials Science Forume, 1998, 284/286: 225–230.
Hodgson P D, Hickson M R, Gibbs R K. The production and mechanical properties of ultrafine ferrite[J]. Materials Science Forume, 1998, 284/286: 63–72.
FANG Kai-tai. Uniform design and uniform design table[M] (in Chinese). Beijing: Science Press, 1994.
Imbert C, Ryan N D, McQueen H J. Hot workability of three grades of tool steel[J]. Metallurgical Transactions A, 1984, 15(9–12): 1855–1864.
Author information
Authors and Affiliations
Additional information
Foundation item: The National Natural Science Foundation of China (No.50075053)
Biography of the first author: ZHANG Bin, doctoral student, born in 1972 majoring in materials science and engineering.
Rights and permissions
About this article
Cite this article
Zhang, B., Liu, Jt., Zhang, Hb. et al. Refinement of austenite grain using uniform experiment design for AISI H13. J Cent. South Univ. Technol. 9, 240–245 (2002). https://doi.org/10.1007/s11771-002-0035-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-002-0035-x