Abstract
In the margarine and butter industry, sustainable and more efficient refrigerants, such as CO2, are introduced to industrial scraped surface heat exchangers, allowing an increased capacity compared to conventional use of NH3. The effect of such changes in capacity and a varied rotational speed was studied in relation to the structural behavior of puff pastry butter during 4 weeks of isothermal storage at 20 °C. The physical properties of the fat crystal network were studied in detail at several length scales by combining X-ray diffraction with differential scanning calorimetry, confocal laser scanning microscopy, LR-NMR and rheology. Our data shows that a high capacity combined with high rotational speed decreases the brittleness of puff pastry butter after 7 days of storage. This effect is, however, diminished after 28 days of storage. Likewise, changes in capacity and rotational speed are shown to induce no microstructural and polymorphic differences after 28 days of storage. However, the degree of work softening is related to the manufacturing conditions: a high capacity and a high rotational speed increase the ability of the puff pastry butter to resist structural breakdown during working. With this being the only observed difference; a wide operational window exists on an industrial level to produce puff pastry butter with similar structural behavior.
Similar content being viewed by others
References
Cavillot V, Pierart C, De Meerendré MK, Vincent M, Paquot M, Wouters J, Deroanne C, Danthine S (2009) Physicochemical properties of European bakery margarines with and without trans fatty acids. J Food Lipids 16:273–286
Haighton AJ (1965) Worksoftening of margarine and shortening. J Am Oil Chem Soc 42:27–30
Rønholt S, Kirkensgaard JJK, Pedersen TB, Mortensen K, Knudsen JC (2012) Polymorphism, microstructure and rheology of butter. Effects of cream heat treatment. Food Chem 135:1730–1739
Larsson K (1966) Classification of glyceride crystal forms. Acta Chem Scand 20:2255–2260
Lopez C, Bourgaux C, Lesieur P, Ollivon M (2002) Crystalline structures formed in cream and anhydrous milk fat at 4°C. Lait 82:317–335
Mazzanti G, Marangoni AG, Idziak SHJ (2009) Synchrotron study on milkfat crystallization kinetics under shear flow. Food Res Int 42:682–694
Bell A, Gordon MH, Jirasubkunakorn W, Smith KW (2007) Effects of composition on fat rheology and crystallization. Food Chem 101:799–805
Buldo P, Wiking L (2012) The role of mixing temperature on microstructure and rheological properties of butter blends. J Am Oil Chem Soc 89:787–795
Kaufmann N, De Graef V, Dewettinck K, Wiking L (2012) Shear-induced crystal structure formation in milk fat and blends with rapeseed oil. Food Biophys 7:308–316
Rønholt S, Kirkensgaard JJK, Mortensen K, Knudsen JC (2014) Effect of cream cooling rate and water content on butter microstructure during four weeks of storage. Food Hydrocol 34:169–176
Heertje I, van Bendenburg J, Cornelissen JM, Juriaanse AC (1988) The effect of processing on some microstructural characteristics of fat spreads. Food Microstruct 7:189–193
Sone T (1961) The rheological behavior and thixotropy of a fatty plastic body. J Phys Soc Jpn 16:961–971
Segura JA, Herrera ML, Añón MC (1990) Storage of commercial margarine at different temperatures. J Am Oil Chem Soc 67:989–992
Madsen J (1971) Proceedings: Changes in margarine and bakery compound caused by physical transformation in the fat phase during storage. In International symposium on deterioration of lipids 147
Alderliesten M (1990) Mean particle diameters. Part II: standardization of nomenclature. Part Part Syst Char 7:233–241
Rønholt S, Mortensen K, Knudsen JC (2013) Small deformation rheology for characterization of anhydrous milk fat/rapeseed oil samples. J Texture Stud. doi:10.1111/jtxs.12048
Kaufmann N, Andersen U, Wiking L (2012) The effect of cooling rate and rapeseed oil addition on the melting behavior, texture and microstructure of anhydrous milk fat. Int Dairy J 25:73–79
Mazzanti G, Guthrie SE, Sirota EB, Marangoni AG, Idziak SHJ (2003) Orientation and phase transitions of fat crystals under shear. Cryst Growth Des 3:721–725
Russel AB, Chenney PE, Wantling SD (1999) Influence of freezing conditions on ice crystallisation in ice cream. J Food Eng 39:179–191
Lopez C, Lesieur P, Bourgaux C, Ollivon M (2005) Thermal and structural behavior of anhydrous milk fat. 3. Influence of cooling rate. J Dairy Sci 88:511–526
Lopez C, Bourgaux C, Lesieur P, Bernadou S, Keller G, Ollivon M (2002) Thermal and structural behavior of milk fat 3. Influence of cooling rate and droplet size on cream crystallization. J Colloid Interf Sci 254:64–78
Rønholt S, Mortensen K, Knudsen JC (2013) The effective factors on the structure of butter and other milk fat-based products. Compr Rev Food Sci Food Saf 12:468–482
Saadi S, Ariffin AA, Ghazali HM, Abdulkarim MS, Boo HC, Miskander MS (2012) Crystallisation regime of w/o emulsion [e.g. multipurpose margarine] models during storage. Food Chem 4:1485–1493
Dumont E, Valle DD, Fayolle F, Legrand J (2000) Influence of flow regimes on temperature heterogeneities within a scraped surface heat exchanger. J Food Process Eng 23(207):220
Acknowledgments
Thanks to the Danish Dairy Research Foundation and The Danish Food Industry Agency for financial support. Thanks to the Danish Agency for Science, Technology and Innovation, Carlsberg and Lundbeck for the funding of our SAXSLAB-instrument. Ann Sofie Madsen and Naja Søndergaard (University of Copenhagen) are acknowledged for their help with small deformation rheology and differential scanning calorimetry, and Mai Sørensen (SPX) for running the LR-NMR analysis and large deformation rheology.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Rønholt, S., Kirkensgaard, J.J.K., Høyer, K.F. et al. The Effect of Capacity, Rotational Speed and Storage on Crystallization and Rheological Properties of Puff Pastry Butter. J Am Oil Chem Soc 91, 29–38 (2014). https://doi.org/10.1007/s11746-013-2353-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11746-013-2353-6