Abstract
To improve the preparation speed and quality of moxa cone, a mould for preparation of moxa cone was designed and applied in moxibustion. It consists three parts: a foundation (a flat-bottomed circular cylinder hollow in center), a moxa cone forming tube (a hollow column encircled by two semi-cylinders with symmetrical shape and size, and was inserted in the internal cavity of the foundation); and a compression rod (a solid cylinder used for compressing moxa placed in moxa cone forming tube). The mould is practical, simple, and convenient and can effectively speed up the preparation of moxa cone, and it is safe in application. Moreover, the obtained moxa cones are regular in shape, uniform in dosage and size, dense in texture, and convenient to pack, store and carry.
摘要
为提高艾炷的制备速度和质量, 设计一种用于制备艾灸用艾炷的模具, 由底座、艾炷成形筒和压缩棒三 部分组成。底座为一平底中空圆筒, 艾炷成形筒为一中空圆柱体, 由两个形状大小对称的半圆柱体合围而成, 插 于底座内腔; 艾炷成形筒的内腔底部呈圆锥形, 内腔的体部呈圆柱形; 压缩棒为一实心圆柱体, 用于压缩置于艾 炷成形筒内的艾绒。模具结构简单, 使用方便, 能有效提高制备艾炷速度,且使用安全。制得的艾柱形状规整, 药 量和大小一致, 质地密实, 便于包装、储存和携带。
Similar content being viewed by others
References
Cheng CW, Fu SF, Zhou QH, Wu TX, Shang HC, Tang XD, Liu ZS, Liu J, Lin ZX, Lao L, Lü AP, Zhang BL, Liu BY, Bian ZX. Extending the CONSORT statement to moxibustion. J Integr Med, 2013, 11(1): 54–63.
Zhang SJ. Discuss on moxibustion for ‘preventive treatment of disease’. Zhongguo Zhen Jiu, 2008, 28(10): 739–740.
Zhao BX, Chen HY, Shen XY, Lao LX. Can moxibustion, an ancient treatment modality, be evaluated in a double-blind randomized controlled trial? A narrative review. J Integr Med, 2014, 12(3): 131–134.
Dong XM, Dong QS, Xian MQ, Zheng XL, Zhang SH. To study the effects of different moxibustion on acupoint temperature. Zhongguo Zhen Jiu, 1999, 19(1): 22–26.
Tang XY, Jiang YW. Discussion on moxibustion. Yunnan Zhongyi Zhongyao Zazhi, 2002, 23(5): 46.
General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Standardization Administration of the People’s Republic of China, Standardized Manipulations of Acupuncture and Moxibustion-Part 1: Moxibustion (GB/T21709. 1-2008). Beijing: Standards Press of China, 2008.
Zheng Y. Research and application progress of the infrared heating effects of moxibustion. J Chin Integr Med, 2012, 10(2): 135–140.
Zhang SJ, Sun WQ, Zhu GL, Ren XM, Gao XZ, Wu MR. Development and usage of the convenient moxa cone maker. Zhongguo Zhen Jiu, 2010, 30(3): 253–254.
Wu HG, Yan J, Yu SG, Xu B, Chang XR, Ma XP, Mu JP, Liu HR. Study on the current situation and development trend of moxibustion. Shanghai Zhenjiu Zazhi, 2009, 28(1): 1–6.
Yue GL, Du GZ, Zhang L. Study on the change of the quality of the moxa moxibustion temperature time curve. Shanghai Zhenjiu Zazhi, 2011, 30(10): 704–706.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, Wh., Tang, Xd. & Ling, Cq. A preparation mould for moxa cone: its design and application. J. Acupunct. Tuina. Sci. 14, 64–66 (2016). https://doi.org/10.1007/s11726-016-0902-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11726-016-0902-x