Abstract
In this study, the mechanical properties of the composite plate were considered Gaussian random fields and their effects on the buckling load and corresponding mode shapes were studied by developing a semi-analytical non-intrusive approach. The random fields were decomposed by the Karhunen-Loève method. The strains were defined based on the assumptions of the first-order and higher-order shear-deformation theories. Stochastic equations of motion were extracted using Euler–Lagrange equations. The probabilistic response space was obtained by employing the non-intrusive polynomial chaos method. Finally, the effect of spatially varying stochastic properties on the critical load of the plate and the irregularity of buckling mode shapes and their sequences were studied for the first time. Our findings showed that different shear deformation plate theories could significantly influence the reliability of thicker plates under compressive loading. It is suggested that a linear relationship exists between the mechanical properties’ variation coefficient and critical loads’ variation coefficient. Also, in modeling the plate properties as random fields, a significant stochastic irregularity is obtained in buckling mode shapes, which is crucial in practical applications.
References
Al-Jumaili S K, Eaton M J, Holford K M, Pearson M R, Crivelli D, Pullin R. Characterisation of fatigue damage in composites using an acoustic emission parameter correction technique. Composites. Part B, Engineering, 2018, 151: 237–244
Maleki S, Rafiee R, Hasannia A, Habibagahi M R. Investigating the influence of delamination on the stiffness of composite pipes under compressive transverse loading using cohesive zone method. Frontiers of Structural and Civil Engineering, 2019, 13(6): 1316–1323
Rajak D K, Pagar D D, Menezes P L, Linul E. Fiber-reinforced polymer composites: Manufacturing, properties, and applications. Polymers, 2019, 11(10): 1667
Sakata S, Okuda K, Ikeda K. Stochastic analysis of laminated composite plate considering stochastic homogenization problem. Frontiers of Structural and Civil Engineering, 2015, 9(2): 141–153
Nikbakht S, Kamarian S, Shakeri M. A review on optimization of composite structures Part II: Functionally graded materials. Composite Structures, 2019, 214: 83–102
Schenk C A, Schuëller G I. Uncertainty assessment of large finite element systems. Lecture Notes in Applied and Computational Mechanics. Vol. 24 Series. New York: Springer Berlin Heidelberg, 2005
Fishman G. Monte Carlo: Concepts, Algorithms, and Applications. Springer Series in Operations Research and Financial Engineering. New York: Springer Science & Business Media, 2013
Nayfeh A H. Perturbation Methods. New York: John Wiley & Sons, 2008
Chow P L. Perturbation methods in stochastic wave propagation. SIAM Review, 1975, 17(1): 57–81
Hosder S, Walters R, Perez R. A non-intrusive polynomial chaos method for uncertainty propagation in CFD simulations. In: 44th AIAA aerospace sciences meeting and exhibit. Nevada: American Institute of Aeronautics and Astronautics, 2006
Gelfand A E, Dey D K, Chang H. Model Determination Using Predictive Distributions with Implementation via Sampling-Based Methods. Technical Report 462. Department of Statistics, Stanford University. 1992
Gelfand A E. Model Determination Using Sampling-Based Methods. Markov Chain Monte Carlo in Practice, Chapter 9. London: Chapman & Hall, 1996, 145–161
Sepahvand K, Marburg S, Hardtke H J. Uncertainty quantification in stochastic systems using polynomial chaos expansion. International Journal of Applied Mechanics, 2010, 2(2): 305–353
Bisagni C. Numerical analysis and experimental correlation of composite shell buckling and post-buckling. Composites. Part B, Engineering, 2000, 31(8): 655–667
Telford R, Peeters D, Rouhi M, Weaver P M. Experimental and numerical study of bending-induced buckling of stiffened composite plate assemblies. Composites. Part B, Engineering, 2022, 233: 109642
Rozylo P, Teter A, Debski H, Wysmulski P, Falkowicz K. Experimental and numerical study of the buckling of composite profiles with open cross section under axial compression. Applied Composite Materials, 2017, 24(5): 1251–1264
Zhang Y, Tao W, Chen Y, Lei Z, Bai R, Lei Z. Experiment and numerical simulation for the compressive buckling behavior of double-sided laser-welded Al–Li alloy aircraft fuselage panel. Materials (Basel), 2020, 13(16): 3599
Ly H B, Desceliers C, Minh Le L, Le T T, Thai Pham B, Nguyen-Ngoc L, Doan V T, Le M. Quantification of uncertainties on the critical buckling load of columns under axial compression with uncertain random materials. Materials (Basel), 2019, 12(11): 1828
Sharma N, Nishad M, Maiti D K, Sunny M R, Singh B N. Uncertainty quantification in buckling strength of variable stiffness laminated composite plate under thermal loading. Composite Structures, 2021, 275: 114486
Kharghani N, Soares C. Effect of uncertainty in the geometry and material properties on the post-buckling behavior of a composite laminate. Maritime Technology and Engineering, 2016, 3: 497–503
Nguyen H X, Duy Hien T, Lee J, Nguyen-Xuan H. Stochastic buckling behaviour of laminated composite structures with uncertain material properties. Aerospace Science and Technology, 2017, 66: 274–283
Hu L, Feng P, Meng Y, Yang J. Buckling behavior analysis of prestressed CFRP-reinforced steel columns via FEM and ANN. Engineering Structures, 2021, 245: 112853
Dey S, Mukhopadhyay T, Spickenheuer A, Gohs U, Adhikari S. Uncertainty quantification in natural frequency of composite plates—An Artificial neural network based approach. Advanced Composites Letters, 2016, 25(2): 43–48
Sasikumar P, Venketeswaran A, Suresh R, Gupta S. A data driven polynomial chaos based approach for stochastic analysis of CFRP laminated composite plates. Composite Structures, 2015, 125: 212–227
Dey S, Mukhopadhyay T, Sahu S, Li G, Rabitz H, Adhikari S. Thermal uncertainty quantification in frequency responses of laminated composite plates. Composites. Part B, Engineering, 2015, 80: 186–197
Chandrashekhar M, Ganguli R. Damage assessment of composite plate structures with material and measurement uncertainty. Mechanical Systems and Signal Processing, 2016, 75: 75–93
Swain P R, Dash P, Singh B N. Stochastic nonlinear bending analysis of piezoelectric laminated composite plates with uncertainty in material properties. Mechanics Based Design of Structures and Machines, 2021, 49(2): 194–216
Singh B N, Iyengar N, Yadav D. Effects of random material properties on buckling of composite plates. Journal of Engineering Mechanics, 2001, 127(9): 873–879
Kalfountzos C D, Bikakis G S, Theotokoglou E E. Deterministic and probabilistic buckling response of fiber-metal laminate panels under uniaxial compression. Aircraft Engineering and Aerospace Technology, 2022, 94(5): 745–759
Zhuang X, Guo H, Alajlan N, Zhu H, Rabczuk T. Deep autoencoder based energy method for the bending, vibration, and buckling analysis of Kirchhoff plates with transfer learning. European Journal of Mechanics. A, Solids, 2021, 87: 104225
Guo H, Zhuang X, Rabczuk T. A deep collocation method for the bending analysis of Kirchhoff plate. Computers, Materials & Continua, 2019, 59(2): 433–456
Guo H, Zheng H, Zhuang X. Numerical manifold method for vibration analysis of Kirchhoff’s plates of arbitrary geometry. Applied Mathematical Modelling, 2019, 66: 695–727
Guo H, Zheng H. The linear analysis of thin shell problems using the numerical manifold method. Thin-walled Structures, 2018, 124: 366–383
Vu-Bac N, Duong T X, Lahmer T, Zhuang X, Sauer R A, Park H S, Rabczuk T. A NURBS-based inverse analysis for reconstruction of nonlinear deformations of thin shell structures. Computer Methods in Applied Mechanics and Engineering, 2018, 331: 427–455
Vu-Bac N, Duong T, Lahmer T, Areias P, Sauer R A, Park H S, Rabczuk T. A NURBS-based inverse analysis of thermal expansion induced morphing of thin shells. Computer Methods in Applied Mechanics and Engineering, 2019, 350: 480–510
Vu-Bac N, Rabczuk T, Park H, Fu X, Zhuang X. A NURBS-based inverse analysis of swelling induced morphing of thin stimuli-responsive polymer gels. Computer Methods in Applied Mechanics and Engineering, 2022, 397: 115049
Vu-Bac N, Lahmer T, Keitel H, Zhao J, Zhuang X, Rabczuk T. Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations. Mechanics of Materials, 2014, 68: 70–84
Vu-Bac N, Lahmer T, Zhang Y, Zhuang X, Rabczuk T. Stochastic predictions of interfacial characteristic of polymeric nanocom-posites (PNCs). Composites. Part B, Engineering, 2014, 59: 80–95
Vu-Bac N, Silani M, Lahmer T, Zhuang X, Rabczuk T. A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites. Computational Materials Science, 2015, 96: 520–535
Adhikari S. Free vibration analysis of angle-ply composite plates with uncertain properties. In: 17th AIAA Non-Deterministic Approaches Conference. Florida: American Institute of Aeronautics and Astronautics, 2015
Vu-Bac N, Rafiee R, Zhuang X, Lahmer T, Rabczuk T. Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters. Composites. Part B, Engineering, 2015, 68: 446–464
Vu-Bac N, Lahmer T, Zhuang X, Nguyen-Thoi T, Rabczuk T. A software framework for probabilistic sensitivity analysis for computationally expensive models. Advances in Engineering Software, 2016, 100: 19–31
Vu-Bac N, Zhuang X, Rabczuk T. Uncertainty quantification for mechanical properties of polyethylene based on fully atomistic model. Materials (Basel), 2019, 12(21): 3613
Liu B, Vu-Bac N, Zhuang X, Rabczuk T. Stochastic multiscale modeling of heat conductivity of Polymeric clay nanocomposites. Mechanics of Materials, 2020, 142: 103280
Liu B, Vu-Bac N, Zhuang X, Fu X, Rabczuk T. Stochastic full-range multiscale modeling of thermal conductivity of Polymeric carbon nanotubes composites: A machine learning approach. Composite Structures, 2022, 289: 115393
Liu B, Vu-Bac N, Rabczuk T. A stochastic multiscale method for the prediction of the thermal conductivity of Polymer nanocomposites through hybrid machine learning algorithms. Composite Structures, 2021, 273: 114269
Fakoor M, Parviz H. Uncertainty propagation in dynamics of composite plates: A semi-analytical non-sampling-based approach. Frontiers of Structural and Civil Engineering, 2020, 14(6): 1359–1371
Fakoor M, Parviz H, Abbasi A. Uncertainty propagation analysis in free vibration of uncertain composite plate using stochastic finite element method. Amirkabir Journal of Mechanical Engineering, 2019, 52(12): 3503–3520
Sriramula S, Chryssanthopoulos M K. An experimental characterisation of spatial variability in GFRP composite panels. Structural Safety, 2013, 42: 1–11
Ghanem R G, Spanos P D. Stochastic finite element method: Response statistics. In: Stochastic Finite Elements: A Spectral Approach. New York: Springer, 1991, 101–119
Fish J, Wu W. A nonintrusive stochastic multiscale solver. International Journal for Numerical Methods in Engineering, 2011, 88(9): 862–879
Reddy J N. Mechanics of Laminated Composite Plates and Shells: Theory and Analysis. 2nd ed. New York: CRC Press, 2003
Kim S E, Thai H T, Lee J. A two variable refined plate theory for laminated composite plates. Composite Structures, 2009, 89(2): 197–205
Tran L V, Thai C H, Le H T, Gan B S, Lee J, Nguyen-Xuan H. Isogeometric analysis of laminated composite plates based on a four-variable refined plate theory. Engineering Analysis with Boundary Elements, 2014, 47: 68–81
Funding
Open Access funding enabled and organized by CAUL and its Member Institution.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Maleki, A.T., Parviz, H., Khatibi, A.A. et al. Probabilistic stability of uncertain composite plates and stochastic irregularity in their buckling mode shapes: A semi-analytical non-intrusive approach. Front. Struct. Civ. Eng. 17, 179–190 (2023). https://doi.org/10.1007/s11709-022-0888-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-022-0888-z
Keywords
- uncertain composite plate
- stochastic assume mode method
- Karhunen-Loève theorem
- polynomial chaos approach
- plate buckling
- irregularity in buckling mode shapes