Abstract
Construction and demolition waste (CDW) are the largest waste products in the world today and competes as a viable recycled additive material in place of natural aggregates. Due to the increase in compressive strength of different mix proportions of CDW, it is also considered for reuse in concrete and subbase construction. This study shows the effect of CDW in expansive soil stabilization. The chemical and mechanical properties of these materials have shown that they are capable of developing compressive strength properties for replacement of cement with significant reduction in carbon emission. The inherent compositional properties of recycled CDW compared in this review suggests that CDW have good filler properties in highly expansive soils. Mixtures of crushed brick and recycled aggregates characterised based on chemical properties of different replacement ratios suggests that CDW of good-quality aggregates reduces swell potential of expansive soils and increased mechanical strength in pavement construction.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Singh Parihar N, Kumar Gupta A. Chemical stabilization of expansive soil using liming leather waste ash. International Journal of Geotechnical Engineering, 2021, 15(8): 1008–1020
Mallela J, Quintus H V, Smith K. Consideration of lime-stabilized layers in mechanistic-empirical pavement design. National Lime Association, 2004, 200: 1–40
Sharma A K, Sivapullaiah P V. Swelling behaviour of expansive soil treated with fly ash-GGBS based binder. Geomechanics and Geoengineering, 2017, 12(3): 191–200
Syed M, GuhaRay A, Kar A. Stabilization of expansive Clayey soil with alkali activated binders. Geotechnical and Geological Engineering, 2020, 38(6): 6657–6677
Ma G, Wang L. A critical review of preparation design and workability measurement of concrete material for largescale 3D printing. Frontiers of Structural and Civil Engineering, 2018, 12(3): 382–400
Bhandari P, Timsina S, Ahmed A, Hossain M S, Thian B. Development of a strength prediction model for recycled base materials with soil intrusion. In: Geo-Congress 2019: Geotechnical Materials, Modeling, and Testing. Reston: American Society of Civil Engineers, 2019, 204–213
Amakye S Y, Abbey S J. Understanding the performance of expansive subgrade materials treated with non-traditional stabilisers: A review. Cleaner Engineering and Technology, 2021, 4:100159
Abbey S J, Eyo E U, Oti J, Amakye S Y, Ngambi S. Mechanical properties and microstructure of fibre-reinforced clay blended with by-product cementitious materials. Geosciences, 2020, 10(6): 241
Petry T M, Little D N. Review of stabilization of clays and expansive soils in pavements and lightly loaded structures—History, practice, and future. Journal of Materials in Civil Engineering, 2002, 14(6): 447–460
Rabab’ah S, Al Hattamleh O, Aldeeky H, Aljarrah M M, Al-Qablan H A. Resilient response and permanent strain of subgrade soil stabilized with byproduct recycled steel and cementitious materials. Journal of Materials in Civil Engineering, 2020, 32(6): 04020139
Cabalar A F, Abdulnafaa M D, Isik H. The role of construction and demolition materials in swelling of a clay. Arabian Journal of Geosciences, 2019, 12(11): 361
Brand A S, Roesler J R. Concrete with Steel Furnace Slag and Fractionated Reclaimed Asphalt Pavement. No. ICT-14-015. 2014
Delongui L, Matuella M, Núñez W P, Fedrigo W, Silva Filho L C P, Ceratti J A P. Construction and demolition waste parameters for rational pavement design. Construction & Building Materials, 2018, 168: 105–112
Wu Z, Fan H, Liu G. Forecasting construction and demolition waste using gene expression programming. Journal of Computing in Civil Engineering, 2015, 29(5): 04014059
Robayo-Salazar R A, Valencia-Saavedra W, Mejía de Gutiérrez R. Construction and demolition waste (CDW) recycling—As both binder and aggregates—In alkali-activated materials: A novel reuse concept. Sustainability, 2020, 12(14): 5775
Estephane P, Garboczi E J, Bullard J W, Wallevik O H. Three-dimensional shape characterization of fine sands and the influence of particle shape on the packing and workability of mortars. Cement and Concrete Composites, 2019, 97: 125–142
Sri Ravindrarajah R, Tam C T. Recycling concrete as fine aggregate in concrete. International Journal of Cement Composites and Lightweight Concrete, 1987, 9(4): 235–241
Fořtová K, Pavlů T. The properties of fine recycled aggregate concrete containing recycled bricks from construction and demolition waste. Key Engineering Materials, 2018, 760: 193–198
Rahman M A, Imteaz M, Arulrajah A, Disfani M M. Suitability of recycled construction and demolition aggregates as alternative pipe backfilling materials. Journal of Cleaner Production, 2014, 66: 75–84
Cabalar A F, Karabash Z, Mustafa W S. Stabilising a clay using tyre buffings and lime. Road Materials and Pavement Design, 2014, 15(4): 872–891
Salesa Á, Pérez-Benedicto J A, Colorado-Aranguren D, López-Julián P L, Esteban L M, Sanz-Baldúz L J, Sáez-Hostaled J L, Ramis J, Olivares D. Physico-mechanical properties of multi-recycled concrete from precast concrete industry. Journal of Cleaner Production, 2017, 141: 248–255
Silva R V, De Brito J, Dhir R K. Availability and processing of recycled aggregates within the construction and demolition supply chain: A review. Journal of Cleaner Production, 2017, 143: 598–614
Akhtar A, Sarmah A K. Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective. Journal of Cleaner Production, 2018, 186: 262–281
Donza H, Cabrera O, Irassar EF. High-strength concrete with different fine aggregate. Cement and Concrete research, 2002, 32(11): 1755–1761
Tam V W, Soomro M, Evangelista A C J. A review of recycled aggregate in concrete applications (2000–2017). Construction & Building Materials, 2018, 172: 272–292
Naqi A, Jang J G. Recent progress in green cement technology utilizing low-carbon emission fuels and raw materials: A review. Sustainability (Basel), 2019, 11(2): 537
Phutthimethakul L, Kumpueng P, Supakata N. Use of flue gas desulfurization gypsum, construction and demolition waste, and oil palm waste trunks to produce concrete bricks. Crystals, 2020, 10(8): 709
Etxeberria M, Marí A R, Vázquez E. Recycled aggregate concrete as structural material. Materials and Structures, 2007, 40(5): 529–541
de Oliveira Andrade J J, Possan E, Squiavon J Z, Ortolan T L P. Evaluation of mechanical properties and carbonation of mortars produced with construction and demolition waste. Construction & Building Materials, 2018, 161: 70–83
Anastasiou E, Papachristoforou M, Anesiadis D, Zafeiridis K, Tsardaka E C. Investigation of the use of recycled concrete aggregates originating from a single ready-mix concrete plant. Applied Sciences (Basel, Switzerland), 2018, 8(11): 2149
Habibzai R, Shigeishi M. Quality evaluation of pulsed power recycled sand by electrical resistivity method. International Journal (Toronto, Ont.), 2020, 19(75): 66–75
Lancellotti I, Vezzali V, Barbieri L, Leonelli C, Grillenzoni A. Wastes: Solutions, Treatments and Opportunities III. London: CRC Press, 2019, 495–499
Kulisch D. The effect of grinding process on recycled cement paste fines. In: International RILEM Workshop on Concrete Durability and Service Life Planning (Concrete Life). Haifa: Springer, 2020: 18–22
Cristelo N, Fernández-Jiménez A, Vieira C, Miranda T, Palomo Á. Stabilization of construction and demolition waste with a high fines content using alkali activated fly ash. Construction & Building Materials, 2018, 170: 26–39
Wu Z, Ann T W, Shen L, Liu G. Quantifying construction and demolition waste: An analytical review. Waste management, 2014, 34(9): 1683–1692
McGinnis M J, Davis M, de la Rosa A, Weldon B D, Kurama Y C. Strength and stiffness of concrete with recycled concrete aggregates. Construction & Building Materials, 2017, 154: 258–269
Vieira C S, Pereira P M, Lopes M L. Recycled Construction and Demolition Wastes as filling material for geosynthetic reinforced structures. Interface properties. Journal of Cleaner Production, 2016, 124: 299–311
Sicakova A, Urban K, Draganovska M. Influence of high dosage of specific C&DW micro-fillers on the fluidity of concrete. Diffusion and Defect Data, Solid State Data. Part B, Solid State Phenomena, 2015, 244: 71–76
Sabai S M. Cradle-to-cradle production: concrete waste recycling for sustainable construction in Tanzania. American Scientific Research Journal for Engineering, Technology, and Sciences, 2015, 14(3): 118–129
López Ruiz L A, Roca Ramón X, Gassó Domingo S. The circular economy in the construction and demolition waste sector—A review and an integrative model approach. Journal of Cleaner Production, 2020, 248: 119238
Saidi M, Ait-Medjber F, Safi B, Samar M. Recycling of aggregates from construction demolition wastes in concrete: Study of physical and mechanical properties. International Journal of Civil and Environmental Engineering, 2014, 8: 1307–1311
Alexandridou C, Angelopoulos G N, Coutelieris F A. Physical, chemical and mineralogical characterization of construction and demolition waste produced in Greece. International Journal of Civil and Environmental Engineering, 2014, 8(9): 975–980
Alexandridou C, Angelopoulos G N, Coutelieris F A. Mechanical and durability performance of concrete produced with recycled aggregates from Greek construction and demolition waste plants. Journal of Cleaner Production, 2018, 176: 745–757
Sicakova A, Draganovska M, Kovac M. Water absorption coefficient as a performance characteristic of building mixes containing fine particles of selected recycled materials. Procedia Engineering, 2017, 180: 1256–1265
Kou S C, Poon C S, Wan H W. Properties of concrete prepared with low-grade recycled aggregates. Construction & Building Materials, 2012, 36: 881–889
Poon C S, Chan D. The use of recycled aggregate in concrete in Hong Kong. Resources, Conservation and Recycling, 2007, 50(3): 293–305
Bangwar D K, Saand A, Keerio M A, Soomro M A, Laghari A N. Replacement of coarse aggregate with locally available brick aggregate. Engineering, Technology & Applied Scientific Research, 2017, 7(6): 2266–2267
Ismail S, Yaacob Z. Properties of bricks produced with recycled fine aggregate. World Academy of Science, Engineering and Technology, 2010, 4(7): 670–674
Husain A, Assas M M. Utilization of demolished concrete waste for new construction. World Academy of Science, Engineering and Technology, 2013, 73: 605–610
Olofinnade O M, Ogara J I, Oyawoye I T, Ede A N, Ndambuki J M, Oyeyemi K D, Nduka D O. Mechanical properties of high strength eco-concrete containing crushed waste clay brick aggregates as replacement for sand. IOP Conference Series. Materials Science and Engineering, 2019, 640(1): 012046
Bassani M, Tefa L. Compaction and freeze-thaw degradation assessment of recycled aggregates from unseparated construction and demolition waste. Construction & Building Materials, 2018, 160: 180–195
Saiz Martínez P, González Cortina M, Fernández Martínez F, Rodríguez Sánchez A. Comparative study of three types of fine recycled aggregates from construction and demolition waste (CDW), and their use in masonry mortar fabrication. Journal of Cleaner Production, 2016, 118: 162–169
Angulo S C, Guilge M S, Quarcioni V A, Baldusco R, Cincotto M A. Rehydration of Cement Fines: A TG/calorimetry Study. São Paulo: Institute for Technological Research, 2013
Bassani M, Diaz Garcia J C, Meloni F, Volpatti G, Zampini D. Recycled coarse aggregates from pelletized unused concrete for a more sustainable concrete production. Journal of Cleaner Production, 2019, 219: 424–432
Levy S M, Helene P. Durability of recycled aggregates concrete: A safe way to sustainable development. Cement and concrete research, 2004, 34(11): 1975–1980
Patil A., Hatti R, Patil D, Kumar R. Comparative study on carbonated and non-carbonated recycled aggregate concrete with glass powder as partial replacement for OPC. International Journal of Recent Contributions from Engineering, Science & IT (iJES), 2017, 5(4): 60–67
Arulrajah A, Piratheepan J, Disfani M M, Bo M W. Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications. Journal of Materials in Civil Engineering, 2013, 25(8): 1077–1088
Arulrajah A, Piratheepan J, Aatheesan T, Bo M W. Geotechnical properties of recycled crushed brick in pavement applications. Journal of Materials in Civil Engineering, 2011, 23(10): 1444–1452
Martín-Morales M, Zamorano M, Ruiz-Moyano A, Valverde-Espinosa I. Characterization of recycled aggregates construction and demolition waste for concrete production following the Spanish Structural Concrete Code EHE-08. Construction & Building Materials, 2011, 25(2): 742–748
Zumrawi M M. Geotechnical aspects for roads on expansive soils. International Journal of Scientific Research, 2015, 4: 896–902
Fang Y, Chang J. Microstructure changes of waste hydrated cement paste induced by accelerated carbonation. Construction & Building Materials, 2015, 76: 360–365
Arulrajah A, Piratheepan J, Ali M M Y, Bo M W. Geotechnical properties of recycled concrete aggregate in pavement sub-base applications. Geotechnical Testing Journal, 2012, 35(5): 103402
Ajdukiewicz A, Kliszczewicz A. Influence of recycled aggregates on mechanical properties of HS/HPC. Cement and Concrete Composites, 2002, 24(2): 269–279
Angulo SC, Carrijo PM, Figueiredo ADD, Chaves AP, John VM. On the classification of mixed construction and demolition waste aggregate by porosity and its impact on the mechanical performance of concrete. Materials and Structures, 2010, 43(4): 519–528
Al-Baidhani A F, Al-Taie A J. Recycled crushed ceramic rubble for improving highly expansive soil. Transportation Infrastructure Geotechnology, 2020, 7(3): 426–444
Aboutalebi Esfahani M. Evaluating the feasibility, usability, and strength of recycled construction and demolition waste in base and subbase courses. Road Materials and Pavement Design, 2020, 21(1): 156–178
Poon C S, Qiao X C, Chan D. The cause and influence of self-cementing properties of fine recycled concrete aggregates on the properties of unbound sub-base. Waste management, 2006, 26(10): 1166–1172
Wainwright P J, Cabrera J G. Use of demolition concrete to produce durable structural concrete. Studies in Environmental Science, 1994, 60: 553–562
Rao A, Jha K N, Misra S. Use of aggregates from recycled construction and demolition waste in concrete. Resources, Conservation and Recycling, 2007, 50(1): 71–81
Eckert M, Oliveira M. Mitigation of the negative effects of recycled aggregate water absorption in concrete technology. Construction & Building Materials, 2017, 133: 416–424
da Conceição Leite F, dos Santos Motta R, Vasconcelos K L, Bernucci L. Laboratory evaluation of recycled construction and demolition waste for pavements. Construction and building materials, 2011, 25(6): 2972–2979
Abishek G L. Experimental Investigation of high-strength characteristics of self curing concrete. International Journal for Modern Trends in Science and Technology, 2016, 2(7): 61
Artuso F, Lukiantchuki J A. Evaluation of the self-cementing effect of Construction and Demotion Waste (CDW) on mechanical performance over time for pavement support layers purpose. Ambiente Construído, 2019, 19(2): 59–77
Mas B, Cladera A, Del Olmo T, Pitarch F. Influence of the amount of mixed recycled aggregates on the properties of concrete for non-structural use. Construction and Building Materials, 2012, 27(1): 612–622
Azevedo A R G, Cecchin D, Carmo D F, Silva F C, Campos C M O, Shtrucka T G, Marvila M T, Monteiro S N. Analysis of the compactness and properties of the hardened state of mortars with recycling of construction and demolition waste (CDW). Journal of Materials Research and Technology, 2020, 9(3): 5942–5952
Abbey S J, Olubanwo A O, Ngambi S, Eyo E U, Adeleke B. Effect of organic matter on swell and undrained shear strength of treated soils. Journal of Civil, Construction and Environmental Engineering, 2019, 4: 48–58
Amakye S Y, Abbey S J, Booth C A, Mahamadu A M. Enhancing the engineering properties of subgrade materials using processed waste: A Review. Geotechnics, 2021, 1(2): 307–329
Eyo E U, Ngambi S, Abbey S J. Investigative modelling of behaviour of expansive soils improved using soil mixing technique. International Journal of Applied Engineering Research: IJAER, 2017, 12(13): 3828–3836
Abbey S J, Ngambi S, Coakley E. Effect of Cement and byproduct material inclusion on plasticity of deep mixing improved soils. International Journal of Civil Engineering and Technology, 2016, 7(5): 265–274
Papagiannakis A T, Masad E A. Pavement Design and Materials. Hoboken: John Wiley & Sons, 2008
Revilla-Cuesta V, Skaf M, Faleschini F, Manso J M, Ortega-López V. Self-compacting concrete manufactured with recycled concrete aggregate: An overview. Journal of Cleaner Production, 2020, 262: 121362
Leite F C, Motta R S, Vasconcelos K L, Bernucci L. Laboratory evaluation of recycled construction and demolition waste for pavements. Construction & Building Materials, 2011, 25(6): 2972–2979
Jiang X, Cui P, Ge Y. Effects of fines on the strength characteristics of mixtures. Engineering Geology, 2015, 198: 78–86
Cortes D D, Kim H K, Palomino A M, Santamarina J C. Rheological and mechanical properties of mortars prepared with natural and manufactured sands. Cement and Concrete Research, 2008, 38(10): 1142–1147
Medjigbodo S, Bendimerad A Z, Rozière E, Loukili A. How do recycled concrete aggregates modify the shrinkage and self-healing properties? Cement and Concrete Composites, 2018, 86: 72–86
Cartuxo F, De Brito J, Evangelista L, Jiménez J R, Ledesma E F. Increased durability of concrete made with fine recycled concrete aggregates using superplasticizers. Materials (Basel), 2016, 9(2): 98
Anastasiou E, Georgiadis Filikas K, Stefanidou M. Utilization of fine recycled aggregates in concrete with fly ash and steel slag. Construction & Building Materials, 2014, 50: 154–161
Guedes M, Evangelista L, De Brito J, Ferro A C. Microstructural characterization of concrete prepared with recycled aggregates. Microscopy and Microanalysis, 2013, 19(5): 1222–1230
Sonawane T R, Pimplikar S S. Use of recycled aggregate concrete. IOSR Journal of Mechanical and Civil Engineering, 2013, 52: 59
Pereira P, Evangelista L, De Brito J M C L. The effect of superplasticisers on the workability and compressive strength of concrete made with fine recycled concrete aggregates. Construction & Building Materials, 2012, 28(1): 722–729
Geng J, Sun J. Characteristics of the carbonation resistance of recycled fine aggregate concrete. Construction & Building Materials, 2013, 49: 814–820
Sim J, Park C. Compressive strength and resistance to chloride ion penetration and carbonation of recycled aggregate concrete with varying amount of fly ash and fine recycled aggregate. Waste management, 2011, 31(11): 2352–2360
Evangelista L, De Brito J M C L. Durability performance of concrete made with fine recycled concrete aggregates. Cement and Concrete Composites, 2010, 32(1): 9–14
Cabral A E B, Schalch V, Molin D C C D, Ribeiro J L D. Mechanical properties modelling of recycled aggregate concrete. Construction & Building Materials, 2010, 24(4): 421–430
Kou S C, Poon C S. Properties of concrete prepared with crushed fine stone, furnace bottom ash and fine recycled aggregate as fine aggregates. Construction & Building Materials, 2009, 23(8): 2877–2886
Poon C S, Kou S C, Wan H W, Etxeberria M. Properties of concrete blocks prepared with low grade recycled aggregates. Waste management, 2009, 29(8): 2369–2377
Kou S C, Poon C S. Properties of self-compacting concrete prepared with coarse and fine recycled concrete aggregates. Cement and Concrete Composites, 2009, 31(9): 622–627
Domingo-Cabo A, Lázaro C, López-Gayarre F, Serrano-López M A, Serna P, Castaño-Tabares J O. Creep and shrinkage of recycled aggregate concrete. Construction & Building Materials, 2009, 23(7): 2545–2553
Corinaldesi V, Moriconi G. Influence of mineral additions on the performance of 100% recycled aggregate concrete. Construction & Building Materials, 2009, 23(8): 2869–2876
Yang K H, Chung H S, Ashour A F. Influence of type and replacement level of recycled aggregates on concrete properties. Materials Journal, 2008, 105(3): 289–296
Evangelista L, de Brito J. Mechanical behaviour of concrete made with fine recycled concrete aggregates. Cement and Concrete Composites, 2007, 29(5): 397–401
Rakshvir M, Barai S V. Studies on recycled aggregates-based concrete. Waste Management & Research, 2006, 24(3): 225–233
Poon C S, Chan D. Feasible use of recycled concrete aggregates and crushed clay brick as unbound road sub-base. Construction & Building Materials, 2006, 20(8): 578–585
Khatib J M. Properties of concrete incorporating fine recycled aggregate. Cement and Concrete Research, 2005, 35(4): 763–769
Zega C J, di Maio A A. Recycled concrete made with different natural coarse aggregates exposed to high temperature. Construction & Building Materials, 2009, 23(5): 2047–2052
Gencel O, Erdugmus E, Sutcu M, Oren O H. Effects of concrete waste on characteristics of structural fired clay bricks. Construction and Building Materials, 2020, 255: 119362
Velay-Lizancos M, Martinez-Lage I, Azenha M, Granja J, Vazquez-Burgo P. Concrete with fine and coarse recycled aggregates: E-modulus evolution, compressive strength and nondestructive testing at early ages. Construction and Building Materials, 2018, 193: 323–331
Katz A. Treatments for the improvement of recycled aggregate. Journal of Materials in Civil Engineering, 2004, 16(6): 597–603
Zaharieva R, Buyle-Bodin F, Skoczylas F, Wirquin E. Assessment of the surface permeation properties of recycled aggregate concrete. Cement and Concrete Composites, 2003, 25(2): 223–232
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Ujile, M.C., Abbey, S.J. The use of fine portions from construction and demolition waste for expansive soil stabilization: A review. Front. Struct. Civ. Eng. 16, 803–816 (2022). https://doi.org/10.1007/s11709-022-0835-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-022-0835-z