Abstract
This paper presents a state-of-the-art review of research on the utilization of fibers (predominantly derived from waste materials) as reinforcement in adobe brick production. Recycling of these wastes provides sustainable construction materials and helps to protect the environment. Specimen preparation and test procedures are outlined. The effects of addition of these wastes on the physical and mechanical properties of adobe bricks as presented in the literature, are investigated. The main results for each additive are presented and discussed. It is concluded that improved adobe brick properties can be expected with the addition of combination of waste additives. The use of waste materials in the construction industry is generally of interest and useful for engineers and designers seeking sustainable solutions in construction. It is also of interest to researchers actively seeking to develop methodical approaches to quantifying, optimising and testing the performance in use of such waste material additives.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Houben H, Guillaud H. Earth Construction—A Comprehensive Guide. London: Intermediate Technology Publications, 1994
Deboucha S, Hashim R. A review on bricks and stabilized compressed earth blocks. Scientific Research and Essays, 2011, 6(3): 499–506
Bui Q B, Morel J C, Venkatarama Reddy B V, Ghayad W. Durability of rammed earth walls exposed for 20 years to natural weathering. Built Environment, 2009, 44(5): 912–919
Taylor P, Luther M B. Evaluating rammed earth walls: A case study. Solar Energy, 2004, 76(1–3): 79–84
Morel J C, Mesbah A, Oggero M, Walker P. Building houses with local materials: Means to drastically reduce the environmental impact of construction. Building and Environment, 2001, 36(10): 1119–1126
Adam E A, Agib A. Compressed Stabilized Earth Block Manufacturing in Sudan. Technical Note No. 12. Comparing Adobe with Fired Clay Bricks. Paris: United Nations Educational Scientific and Cultural Organization (UNESCO), 2001
Minke G. Earth Construction Handbook: The Building Material Earth in Modern Architecture. Southampton: Wit Press, 2000
Minke G. Building with Earth. Design and Technology of a Sustainable Architecture. Basel: Birkhäuser, 2006
Avrami E, Guillaud H, Hardy M. Terra Literature Review. An Overview of Research in Earthen Architecture Conservation. Los Angeles: The Getty Conservation Institute, 2008
Ziegler S, Leshchinsky D, Ling H L, Perry E B. Effect of short polymeric fibres on crack development in clays. Soil and Foundation, 1998, 38(1): 247–253
Rigassi V. Compressed Earth Blocks: Manual of Production. Braunschweig: Deutsche Gesellschaft für Technische Zusammenarbeit (GTZ), 1995
United Nations Centre for Human Settlements (UN-Habitat). Earth Construction Technology. Nairobi: Earth Construction Technology, 1992
Mesbah A, Morel J C, Walker P, Ghavami K. Development of a direct tensile test for compacted earth blocks reinforced with natural fibers. Journal of Materials in Civil Engineering, 2004, 16(1): 95–98
Elenga R G, Mabiala B, Ahouet L, Goma-Maniongui J, Dirras G F. Characterization of clayey soils from Congo and physical properties of their compressed earth blocks reinforced with postconsumer plastic wastes. Geomaterials, 2011, 1(3): 88–94
Russ W, Mörtel H, Meyer-Pittroff R. Application of spent grains to increase porosity in bricks. Construction & Building Materials, 2005, 19(2): 117–126
Yetgin Ş, Çavdar O, Çavdar A. The effects of the fibre contents on the mechanic properties of the adobes. Construction & Building Materials, 2008, 22(3): 222–227
Grimwood C. Complaints about poor sound insulation between dwellings in England and Wales. Applied Acoustics, 1997, 52(3–4): 211–223
Bahobail M A. The mud additives and their effect on thermal conductivity of adobe bricks. Journal of Engineering Sciences, 2011, 40(1): 21–34
Raut S P, Ralegaonkar R V, Mandavgane S A. Development of sustainable construction material using industrial and agricultural solid waste: A review of waste-create bricks. Construction & Building Materials, 2011, 25(10): 4037–4042
Dondi M, Marsigli M, Fabbri B. Recycling of industrial and urban wastes in brick production: A review (Part 1). Tile Brick International, 1997, 13(3): 218–225
Dondi M, Marsigli M, Fabbri B. Recycling of industrial and urban wastes in brick production: A review (Part 2). Tile Brick International, 1997, 13(4): 302–309
Demir I. An Investigation on the production of construction brick with processed waste tea. Building and Environment, 2006, 41(9): 1274–1278
Galán-Marín C, Rivera-Gómez C, Petric J. Clay-based composite stabilized with natural polymer and fibre. Construction & Building Materials, 2010, 24(8): 1462–1468
Donkor P, Obonyo E. Compressed soil blocks: Influence of fibers on flexural properties and failure mechanism. Construction & Building Materials, 2016, 121: 25–33
Oti J E, Kinuthia J M, Bai J. Compressive strength and microstructural analysis of unfired clay masonry bricks. Engineering Geology, 2009, 109(3–4): 230–240
Calatan G, Hegyi A, Dico C, Mircea C. Determining the optimum addition of vegetable materials in adobe bricks. Procedia Technology, 2016, 22: 259–265
Oti J E, Kinuthia J M, Bai J. Developing unfired stabilised building materials in the UK. Engineering Sustainability, 2008, 161(4): 211–218
Mesbah A, Morel J C, Walker P, Ghavami K. Development of a direct tensile test for compacted earth blocks reinforced with natural fibers. Journal of Materials in Civil Engineering, 2004, 16(1): 95–98
Raut A N, Gomez C P. Development of thermally efficient fibre-based eco-friendly brick reusing locally available waste materials. Construction & Building Materials, 2017, 133: 275–284
Donkor P, Obonyo E. Earthen construction materials: Assessing the feasibility of improving strength and deformability of compressed earth blocks using polypropylene fibers. Materials & Design, 2015, 83: 813–819
Aymerich F, Fenu L, Meloni P. Effect of reinforcing wool fibres on fracture and energy absorption properties of an earthen material. Construction & Building Materials, 2012, 27(1): 66–72
Chan C. Effect of natural fibres inclusion in clay bricks: Physicomechanical properties. International Journal of Civil and Environmental Engineering, 2011, 5(1): 7–13
Danso H, Martinson D B, Ali M, Williams J. Effect of fibre aspect ratio on mechanical properties of soil building blocks. Construction & Building Materials, 2015, 83: 314–319
Oti J E, Kinuthia J M, Bai J. Engineering properties of unfired clay masonry bricks. Engineering Geology, 2009, 107(3–4): 130–139
Sharma V, Vinayak H K, Marwaha B M. Enhancing compressive strength of soil using natural fibers. Construction & Building Materials, 2015, 93: 943–949
Sharma V, Marwaha B M, Vinayak H K. Enhancing durability of adobe by natural reinforcement for propagating sustainable mud housing. International Journal of Sustainable Built Environment, 2016, 5(1): 141–155
Piattoni Q, Quagliarini E, Lenci S. Experimental analysis and modelling of the mechanical behaviour of earthen bricks. Construction & Building Materials, 2011, 25(4): 2067–2075
Mostafa M, Uddin N. Experimental analysis of Compressed Earth Block (CEB) with banana fibers resisting flexural and compression forces. Case Studies in Construction Materials, 2016, 5: 53–63
Millogo Y, Morel J, Aubert J, Ghavami K. Experimental analysis of Pressed Adobe Blocks reinforced with Hibiscus cannabinus fibers. Construction & Building Materials, 2014, 52: 71–78
Muntohar A S. Engineering characteristics of the compressed-stabilized earth brick. Construction & Building Materials, 2011, 25(11): 4215–4220
Parisi F, Asprone D, Fenu L, Prota A. Experimental characterization of Italian composite adobe bricks reinforced with straw fibers. Composite Structures, 2015, 122: 300–307
Subramaniaprasad C K, Abraham B M, Kunhanandan Nambiar E K. Influence of embedded waste-plastic fibers on the improvement of the tensile strength of stabilized mud masonry blocks. Journal of Materials in Civil Engineering, 2015, 27(7): 04014203
El-Mahllawy M S, Kandeel A M. Engineering and mineralogical characteristics of stabilized unfired montmorillonitic clay bricks. HBRC Journal, 2014, 10(1): 82–91
Smeu S, Gal A, Badea C. Environmental friendly building materials: Unfired clay bricks. Journal of Environment, 2014, 3(3): 47–50
Vega P, Juan A, Ignacio Guerra M, Morán J M, Aguado P J, Llamas B. Mechanical characterisation of traditional adobes from the north of Spain. Construction & Building Materials, 2011, 25(7): 3020–3023
Ribeiro C A, Paula P T, Tarcísio L J, Denzin T G, Marin M L. Mechanical properties of adobe made with sugar cane bagasse and “synthetic termite saliva” incorporation. Key Engineering Materials, 2015, 634: 351–356
Tonnayopas D. Green building bricks made with clays and sugar cane bagasse ash. In: Proceeding of the 11th International Conference on Mining, Materials and Petroleum Engineering. Mai: ASEAN, 2013, 7–14
Taallah B, Guettala A, Guettala S, Kriker A. Mechanical properties and hygroscopicity behavior of compressed earth block filled by date palm fibers. Construction & Building Materials, 2014, 59: 161–168
Binici H, Aksogan O, Shah T. Investigation of fibre reinforced mud brick as a building material. Construction & Building Materials, 2005, 19(4): 313–318
Ashour T, Korjenic A, Korjenic S, Wu W. Thermal conductivity of unfired earth bricks reinforced by agricultural wastes with cement and gypsum. Energy and Building, 2015, 104: 139–146
Taallah B, Guettala A. The mechanical and physical properties of compressed earth block stabilized with lime and filled with untreated and alkali-treated date palm fibers. Construction & Building Materials, 2016, 104: 52–62
Quagliarini E, Lenci S. The influence of natural stabilizers and natural fibres on the mechanical properties of ancient Roman adobe bricks. Journal of Cultural Heritage, 2010, 11(3): 309–314
Zak P, Ashour T, Korjenic A, Korjenic S, Wu W. The influence of natural reinforcement fibers, gypsum and cement on compressive strength of earth bricks materials. Construction & Building Materials, 2016, 106: 179–188
Yetgin S, Cavdar O, Cavdar A. The effects of the fiber contents on the mechanic properties of the adobes. Construction & Building Materials, 2008, 22(3): 222–227
Oti J E, Kinuthia J M, Robinson R B. The development of unfired clay building material using Brick Dust Waste and Mercia mudstone clay. Applied Clay Science, 2014, 102: 148–154
Rojas-Valencia M N, Bolaños E A. Sustainable adobe bricks with construction wastes. Water Resources Management, 2016, 169: 158–165
Binici H, Aksogan O, Bakbak D, Kaplan H, Isik B. Sound insulation of fibre reinforced mud brick walls. Construction & Building Materials, 2009, 23(2): 1035–1041
Turanli L, Saritas A. Strengthening the structural behavior of adobe walls through the use of plaster reinforcement mesh. Construction & Building Materials, 2011, 25(4): 1747–1752
Bock-Hyeng C, Ofori-Boadu A N, Yamb-Bell E, Shofoluwe M A. Mechanical properties of sustainable adobe bricks stabilized with recycled sugarcane fiber waste. International Journal of Engineering Research and Applications, 2016, 6(9): 50–59
Millogo Y, Hajjaji M, Ouedraogo R. Microstructure and physical properties of lime-clayey adobe bricks. Construction & Building Materials, 2008, 22(12): 2386–2392
Danso H D, Martinson B, Ali M, Williams J B. Physical, mechanical and durability properties of soil building blocks reinforced with natural fibres. Construction & Building Materials, 2015, 101: 797–809
Serrano S, Barreneche C, Cabeza L F. Use of by-products as additives in adobe bricks: Mechanical properties characterisation. Construction & Building Materials, 2016, 108: 105–111
Binici H, Aksogan O, Bodur M N, Akca E, Kapur S. Thermal isolation and mechanical properties of fibre reinforced mud bricks as wall materials. Construction & Building Materials, 2007, 21(4): 901–906
Lima S A, Varum H, Sales A, Neto V F. Analysis of the mechanical properties of compressed earth block masonry using the sugarcane bagasse ash. Construction & Building Materials, 2012, 35: 829–837
Oti J E, Kinuthia J M, Bai J. Unfired clay bricks: From laboratory to industrial production. Engineering Sustainability, 2009, 162(4): 229–237
Sharma V, Vinayak H K, Marwaha B M. Enhancing sustainability of rural adobe houses of hills by addition of vernacular fiber reinforcement. International Journal of Sustainable Built Environment, 2015, 4(2): 348–358
Martínez-Hernandez L, Velasco-Santos C, de-Icaza M, Castaño V M. Microstructural characterization of keratin fibers from chicken feathers. International Journal of Environment and Pollution, 2005, 23(2): 162–178
Reddy B V. Stabilized soil blocks for structural masonry in earth construction. Modern Earth Buildings, 2012: 324–363
Roh M S, Bauchan G R, Huda M S. The effect of biobased plastic resins containing chicken feather fibers on the growth and flowering of Begonia boliviensis. Journal of Horticulture, Environment, and Biotechnology, 2012, 53(1): 81–91
Al-Asheh S, Banat F, Al-Rousan D. Beneficial reuse of chicken feathers in removal of heavy metals from wastewater. Journal of Cleaner Production, 2003, 11(3): 321–326
Sun X F, Sun R C, Sun J X. Acetylation of sugarcane bagasse using NBS as a catalyst under mild reaction conditions for the production of oil sorption active materials. Bioresource Technology, 2004, 95(3): 343–350
Abdul Kadir A, Maasom N. Recycling sugarcane bagasse waste into fired clay brick. International Journal of Zero Waste Generation, 2013, 1(1): 21–26
Banerjee R, Pandey A. Bio-industrial application of sugarcane bagasse: A technological perspective. International Sugar Journal, 2002, 104: 64–70
Muñoz Velasco P, Morales Ortíz M P, Mendívil Giró M A, Muñoz Velasco L. Fired clay bricks manufactured by adding wastes as sustainable construction material—A review. Construction & Building Materials, 2014, 63: 97–107
Gualtieri M L, Gualtieri A F, Gagliardi S, Ruffini P, Ferrari R, Hanuskova M. Thermal conductivity of fired clays: Effects on mineralogical and physical properties of the raw materials. Applied Clay Science, 2010, 49(3): 269–275
Brick Industry Association (USA). Manufacturing, Classification and Selection of Brick Manufacturing—Part I. Virginia: BIA, 1986
ASTM C 67. Standard Methods of Sampling and Testing Brick and Structural Clay Tile. Brick Manufacturing Part I. West Conshohocken, PA: ASTM International, 1986
Turkish Standard, TS 704. Clay Bricks-Wall Tile. Ankara: Turkish Standard Institution, 1983
Turkish Standard, TS 705. Solid Brick and Vertically Perforated Bricks (the Classification, Properties, Sampling, Testing and Marking of Solid Bricks and Vertically Perforated Bricks). Ankara: Turkish Standard Institution, 1985
European Committee for Standardization, EN 196-1 2005. Methods of Testing Cement. Part 1: Determination of Strength. Brussels: AENOR, 2005
European Committee for Standardization, 1015-2 1998. Methods of Test for Mortars for Masonry. Part 2: Bulk Sampling of Mortars and Preparation of Test Mortars. Brussels: AENOR, 1999
European Committee for Standardization, EN 12190 1999. Products and Systems for the Protection and Repair of Concrete Structures. Test methods. Determination of compressive strength of repair mortars. Brussels: AENOR, 1998
European Committee for Standardization, EN 83-821-925. Determination of Compressive Strengths in Mortars Used for Rough Castings and Mortar Linings, Being Made with Lime or Hydraulic Conglomerate. Brussels: AENOR, 1998
ASTM C 1609. Standard Test Method for flexural performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading). West Conshohocken, PA: ASTM International, 2012.
British Standards, BS 1924-2. Stabilised Materials for Civil Engineering Purposes—Part 2: Methods of Test for Cement-Stabilised and Lime-Stabilised Materials. London: British Standards Institution (BSI), 1990
British Standards, BS EN 771-1. Specification for Masonry Units-Part 1: Clay masonry units. London: British Standards Institution (BSI), 2003
ASTM E 2392/E2392M-10. Standard Guide for Design of Earthen Wall Building Systems. West Conshohocken, PA: ASTM International, 2016
Zimbabwe Standard, SAZ 724. Code of Practice for Rammed Earth Structures. Harare: Standards Association of Zimbabwe, 2001
ASTMD2487-11. Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System). West Conshohocken, PA: ASTM International, 2011
British Standards Institute, BS 1377-2. Methods of Test for Soils for Civil Engineering Purposes, Part 2: Classification Tests. London: British Standards Institution (BSI), 1998
British Standards Institute, BS 3921:1985. Specifications for Clay Bricks. London: British Standards Institution (BSI), 1998
ASTM C 20-00. Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water, ASTM International. West Conshohocken, PA: ASTM International, 2015
Indian Standard, IS 4860:1968. Specification for Acid Resistant Bricks. New Delhi: Bureau of Indian Standards (BIS), 1996
ASTM C 618-15. Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. West Conshohocken, PA: ASTM International, 2015
New Mexico Construction Bureau, NMAC14.7.4. New Mexico Adobe and Rammed Earth Building Code, Construction Industries Division. New Mexico: General Construction Bureau, 2009
ASTM D 422-63. Standard Test Method for Particle-Size Analysis of Soils. West Conshohocken, PA: ASTM International, 2007
Standards New Zealand, NZS 4297. Engineering Design of Earth Buildings. Wellington: Standards New Zealand, 1998
Standards New Zealand, NZS 4298. Materials and Workmanship for Earth Buildings. Wellington: Standards New Zealand, 1998
ASTM C 1018-97. Standard Test Method for Flexural Toughness and Firstcrack Strength of Fiber-reinforced Concrete (Using Beam with Third-Point Loading). West Conshohocken, PA: ASTM International, 1997
Malaysian Standards, MS 76. Specifications for Bricks and Blocks of Fired Bricks, Clay or Shale, Part 2: Metric Units. Selangor: Standard and Industrial Research Institute of Malaysia (SIRIM), 1972
British Standards Institute, BS EN 197-1. Cement—Part 1: Composition, Specification and on forming Criteria for Common Cements. London: British Standards Institution (BSI), 2000
British Standards Institute, BS EN 771-3. Methods of Test for Masonry Units—Part 3: Determination of Net Volume and Percentage of Voids of Clay Masonry Units by Hydrostatic Weighing. London: British Standards Institution (BSI), 1998
US EPA. Final Rule. 40 CFR Part 63. National Emission Standards for Hazardous Air Pollutants for Brick and Structural Clay Products Manufacturing; and National Emission Standards for Hazardous Air Pollutants for Clay Ceramics Manufacturing. Washington, D.C.: EPA, 2003
Indian Standards, IS 2720-4. Grain Size Analysis. New Delhi: Bureau of Indian Standards (BIS), 1985
Indian Standards, IS 2720-5. Determination of Liquid and Plastic Limit. New Delhi: Bureau of Indian Standards (BIS), 1985
Indian Standards, IS 2720-7. Determination of Water Content-Dry Density Relation Using Light Compaction. New Delhi: Bureau of Indian Standards (BIS), 1985
Indian Standards, IS1498. Classification and Identification of Soils for General Engineering Purposes. New Delhi: Bureau of Indian Standards (BIS), 1970
Indian Standards, IS 1725. Specification for Soil Based Blocks Used in General Building Construction. New Delhi: Bureau of Indian Standards (BIS), 1982
Indian Standards, IS 2720-10. Method of Test for Soils—Part 10: Determination of Unconfined Compressive Strength. New Delhi: Bureau of Indian Standards (BIS), 1991
Indian Standards, IS 4332-1. Method of Test for Soils—Part 1: Method of Sampling and Preparation of Stabilized Soils for Testing. New Delhi: Bureau of Indian Standards (BIS), 1967
Indian Standards, IS 4332-3. Method of Test for Stabilized Soils—Part 3: Test for Determination of Moisture Content-Dry Density Relation for Stabilize Soil Mixtures. New Delhi: Bureau of Indian Standards (BIS), 1967
ASTM D 3822-07. Standard Test Method for Tensile Properties of Single Textile Fibers. West Conshohocken, PA: ASTM International, 2007
Indonesian Standard, SNI 15-2094. Massive Red Bricks for Masonry Works. Jakarta: National Standardization Agency of Indonesia, 2000
Indonesian standard, SNI 03-6458. Methods for Flexural Strength of Soil-cement Using Simple Beam with Third-point Loading. Jakarta: National Standardization Agency of Indonesia, 2000
Italian Building Code (IBC). D. M. 14.01. Technical Standards for Construction. Rome: Italian Ministry of Infrastructures and Transportation, 2008 (in Italian)
Indian Standards, BIS 1725. Specifications for Soil Based Blocks Used in General Building Construction. New Delhi: Bureau of Indian Standards, 2002
Egyptian Standard Specification. ESS 1234. Masonry Building Units Made from Desert Clay Used for Non-load Bearing Walls. Cairo: Egyptian Standard Specification (ESS), 2005
Egyptian Standard Specification. ESS 584-1. Quick and Hydrated Lime—Part 1: Definitions, Requirements and Conformity Criteria. Cairo: Egyptian Standard Specification (ESS), 2008
European Committee for Standardization, EN 12372. Natural Stone Test Methods—Determination of Flexural Strength under Concentrated Load. Brussels: EN, 2006
Spanish Standard, UNE 103101. Particle Size Analysis of A Soil by Screening. Madrid: AENOR, 1995 (in Portuguese)
ASTM D 790. Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. West Conshohocken, PA: ASTM International, 2000
Thai Industrial Standard Institute, TIS 77. Standards Specification for Building Brick (Solid Masonry Units Made from Clay or Shale). Bangkok: Thai Industrial Standards Institute (TISI), 1974
ASTM C 1113/C 1113 M-09. Standard test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique). West Conshohocken, PA: ASTM International, 2009
French Standard, AFNOR, XP P13-901. Compressed Earth Blocks for Walls and Partitions: Definitions-Specifications-Test Methods-Delivery Acceptance Conditions. Paris: French Standard Institute, 2001 (in French)
European Committee for Standardization, EN 1015-11. Methods of Test for Mortar for Masonry—Part 11: Determination of Flexural and Compressive Strength of Hardened Mortar. Brussels: AENOR, 1999
DIN 18952 Part 2. Experiments of Earth Materials. Koln: DIN, 1956
British Standards Institute, BS 5628-3. Code of Practice for the Use of Masonry—Part 3: Materials and Components, Design and Workmanship. London: British Standards Institution (BSI), 2005
ASTM C 384-98. Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method. West Conshohocken, PA: ASTM International, 1998
French Standard, AFNOR, NF P 14-306. Precast Concrete Blocks-Autoclaved Aerated Concrete Blocks for Wall and Partitions. Paris: French Standard Institute, 1986 (in French)
British Standards Institute, BS EN 772-1. Methods of Test for Masonry Units—Part 1: Determination of Compressive Strength. London: British Standards Institution (BSI), 1998
ASTM D 559-03. Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures. West Conshohocken, PA: ASTM International, 2003
Turkish Standards, TS-2514. Adobe Blocks and Production Methods. Ankara: Turkish Standards Institute, 1997
ABNT NBR 8492. Massive Earth-cement Bricks—Determination of Compressive Strength and Water Absorption. Rio de Janeiro: NBR, 1984 (in Portuguese)
Indian Standards, IS 2720-2. Determination of Water Content of Soils. New Delhi: Bureau of Indian Standards (BIS), 1973
Acknowledgements
The authors gratefully acknowledge the research support fund provided by the Sudanese Ministry of Higher Education, School of Engineering University of Khartoum and the School of Engineering, University of Aberdeen.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Salih, M.M., Osofero, A.I. & Imbabi, M.S. Critical review of recent development in fiber reinforced adobe bricks for sustainable construction. Front. Struct. Civ. Eng. 14, 839–854 (2020). https://doi.org/10.1007/s11709-020-0630-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-020-0630-7