Abstract
Homogenization is a promising approach to capture the behavior of complex structures like corrugated panels. It enables us to replace high-cost shell models with stiffness-equivalent orthotropic plate alternatives. Many homogenization models for corrugated panels of different shapes have been proposed. However, there is a lack of investigations for verifying their accuracy and reliability. In addition, in the recent trend of development of smoothed finite element methods, the cell-based smoothed three-node Mindlin plate element (CS-MIN3) based on the first-order shear deformation theory (FSDT) has been proposed and successfully applied to many analyses of plate and shell structures. Thus, this paper further extends the CS-MIN3 by integrating itself with homogenization models to give homogenization methods. In these methods, the equivalent extensional, bending, and transverse shear stiffness components which constitute the equivalent orthotropic plate models are represented in explicit analytical expressions. Using the results of ANSYS and ABAQUS shell simulations as references, some numerical examples are conducted to verify the accuracy and reliability of the homogenization methods for static analyses of trapezoidally and sinusoidally corrugated panels.
Similar content being viewed by others
References
Dayyani I, Shaw A D, Saavedra Flores E I, Friswell M I. The mechanics of composite corrugated structures: A review with applications in morphing aircraft. Composite Structures, 2015, 133: 358–380
Xia Y, Friswell M I, Flores E I S. Equivalent models of corrugated panels. International Journal of Solids and Structures, 2012, 49(13): 1453–1462
Briassoulis D. Equivalent orthotropic properties of corrugated sheets. Computers & Structures, 1986, 23(2): 129–138
Shimansky R A, Lele M M. Transverse stiffness of a sinusoidally corrugated plate. Mechanics of Structures and Machines, 1995, 23 (3): 439–451
Samanta A, Mukhopadhyay M. Finite element static and dynamic analyses of folded plates. Engineering Structures, 1999, 21: 277–287
Liew K M, Peng L X, Kitipornchai S. Buckling analysis of corrugated plates using a mesh-free Galerkin method based on the first-order shear deformation theory. Computational Mechanics, 2006, 38(1): 61–75
Peng L X, Liew K M, Kitipornchai S. Analysis of stiffened corrugated plates based on the FSDT via the mesh-free method. International Journal of Mechanical Sciences, 2007, 49(3): 364–378
Liew K M, Peng L X, Kitipornchai S. Nonlinear analysis of corrugated plates using a FSDT and a meshfree method. Computer Methods in Applied Mechanics and Engineering, 2007, 196(21–24): 2358–2376
Liew K M, Peng L X, Kitipornchai S. Vibration analysis of corrugated Reissner–Mindlin plates using a mesh-free Galerkin method. International Journal of Mechanical Sciences, 2009, 51(9–10): 642–652
Ye Z, Berdichevsky V L, YuW. An equivalent classical plate model of corrugated structures. International Journal of Solids and Structures, 2014, 51(11–12): 2073–2083
Park K J, Jung K, Kim Y W. Evaluation of homogenized effective properties for corrugated composite panels. Composite Structures, 2016, 140: 644–654
Alshabatat N. Design of corrugated plates for optimal fundamental frequency. Advances in Acoustics and Vibration, 2016, 4290247: 1–9
Nordstrand T, Carlsson L A, Allen H G. Transverse shear stiffness of structural core sandwich. Composite Structures, 1994, 27(3): 317–329
Nordstrand T M, Carlsson L A. Evaluation of transverse shear stiffness of structural core sandwich plates. Composite Structures, 1997, 37(2): 145–153
Talbi N, Batti A, Ayad R, Guo Y Q. An analytical homogenization model for finite element modelling of corrugated cardboard. Composite Structures, 2009, 88(2): 280–289
Bartolozzi G, Pierini M, Orrenius U, Baldanzini N. An equivalent material formulation for sinusoidal corrugated cores of structural sandwich panels. Composite Structures, 2013, 100: 173–185
Bartolozzi G, Baldanzini N, Pierini M. Equivalent properties for corrugated cores of sandwich structures: A general analytical method. Composite Structures, 2014, 108: 736–746
Cheon Y J, Kim H G. An equivalent plate model for corrugated-core sandwich panels. Journal of Mechanical Science and Technology, 2015, 29(3): 1217–1223
Magnucka-Blandzi E, Magnucki K, Wittenbeck L. Mathematical modeling of shearing effect for sandwich beams with sinusoidal corrugated cores. Applied Mathematical Modelling, 2015, 39(9): 2796–2808
Kress G, Winkler M. Corrugated laminate analysis: A generalized plane-strain problem. Composite Structures, 2011, 93(5): 1493–1504
Bartolozzi G D. Modeling of corrugated core sandwich panels in multidisciplinary optimization processes. Dissertation for the Doctoral Degree. Lawrence: Univerisity of Kansas, 2013
Dayyani I, Friswell M I. Multi-objective optimization for the geometry of trapezoidal corrugated morphing skins. Structural and Multidisciplinary Optimization, 2017, 55(1): 331–345
McFarland D E. An investigation of the static stability of corrugated rectangular plates loaded in pure shear. Dissertation for the Doctoral Degree. 1967
Semenyuk N P, Neskhodovskaya N A. On design models in stability problems for corrugated cylindrical shells. International Applied Mechanics, 2002, 38(10): 1245–1252
Ye Z, Yu W. Homogenization of piecewise straight corrugated plates. In: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston: American Institute of Aeronautics and Astronautics, 2013
He X Q, Ng T Y, Sivashanker S, Liew K M. Active control of FGM plates with integrated piezoelectric sensors and actuators. International Journal of Solids and Structures, 2001, 38(9): 1641–1655
Balamurugan V, Narayanan S. Shell finite element for smart piezoelectric composite plate/shell structures and its application to the study of active vibration control. Finite Elements in Analysis and Design, 2001, 37(9): 713–718
Carrera E. Theories and finite elements for multilayered, anisotropic, composite plates and shells. Archives of Computational Methods in Engineering. 2002, 9(2):87–140
Thai H-T. Kim S-E. A review of theories for the modeling and analysis of functionally graded plates and shells. Composite Structures, 2015, 128: 70–86
Ren M, Cong J,Wang B, Guo X. Extended multiscale finite element method for small-deflection analysis of thin composite plates with aperiodic microstructure characteristics. Composite Structures, 2017, 160: 422–434
Areias P, Rabczuk T, Msekh M A. Phase-field analysis of finitestrain plates and shells including element subdivision. Computer Methods in Applied Mechanics and Engineering, 2016, 312: 322–350
Amiri F, Millán D, Shen Y, Rabczuk T, Arroyo M. Phase-field modeling of fracture in linear thin shells. Theoretical and Applied Fracture Mechanics, 2014, 69: 102–109
Areias P, Rabczuk T. Finite strain fracture of plates and shells with configurational forces and edge rotations. International Journal for Numerical Methods in Engineering, 2013, 94(12): 1099–1122
Rabczuk T, Areias P M A, Belytschko T. A meshfree thin shell method for non-linear dynamic fracture. International Journal for Numerical Methods in Engineering, 2007, 72(5): 524–548
Liew K M, Zhao X, Ferreira A J M. A review of meshless methods for laminated and functionally graded plates and shells. Composite Structures, 2011, 93(8): 2031–2041
Nguyen-Thanh N, Valizadeh N, Nguyen M N, Nguyen-Xuan H, Zhuang X, Areias P, Zi G, Bazilevs Y, De Lorenzis L, Rabczuk T. An extended isogeometric thin shell analysis based on Kirchhoff–Love theory. Computer Methods in Applied Mechanics and Engineering, 2015, 284: 265–291
Phung-Van P, Nguyen-Thoi T, Dang-Trung H, Nguyen-Minh N. A cell-based smoothed discrete shear gap method (CS-FEM-DSG3) using layerwise theory based on the C0-HSDT for analyses of composite plates. Composite Structures, 2014, 111(0): 553–565
Nguyen-Xuan P P V, Nguyen-Thoi T, Le-Dinh T H. Static and free vibration analyses and dynamic control of composite plates integrated with piezoelectric sensors and actuators by the cellbased smoothed discrete shear gap method (CS-FEM-DSG3). Smart Materials and Structures, 2013, 22(9): 95026
Tan P, Nguyen-Thanh N, Zhou K. Extended isogeometric analysis based on Bazier extraction for an FGM plate by using the twovariable refined plate theory. Theoretical and Applied Fracture Mechanics, 2017, 89: 127–138
Liew K M, He X Q, Kitipornchai S. Finite element method for the feedback control of FGM shells in the frequency domain via piezoelectric sensors and actuators. Computer Methods in Applied Mechanics and Engineering, 2004, 193(3–5): 257–273
Liu G R, Nguyen-Thoi T. Smoothed Finite Element Methods. Boca Raton: CRC Press, 2010
Chen J S, Wu C T, Yoon S, You Y. A stabilized conforming nodal integration for Galerkin mesh-free methods. International Journal for Numerical Methods in Engineering, 2001, 50(2): 435–466
Liu G R, Dai K Y, Nguyen-Thoi T. A smoothed finite element method for mechanics problems. Computational Mechanics, 2007, 39(6): 859–877
Nguyen-Thoi T, Phung-Van P, Rabczuk T, Nguyen-Xuan H, Le-Van C. Free and forced vibration analysis using the n-sided polygonal cell-based smoothed finite element method (nCS-FEM). International Journal of Computational Methods, 2013, 10(1): 1340008
Liu G R, Nguyen-Thoi T, Nguyen-Xuan H, Lam K Y. A node-based smoothed finite element method (NS-FEM) for upper bound solutions to solid mechanics problems. Computers & Structures, 2009, 87(1-2): 14
Nguyen-Xuan H, Rabczuk T, Nguyen-Thoi T, Tran T N, Nguyen-Thanh N. Computation of limit and shakedown loads using a nodebased smoothed finite element method. International Journal for Numerical Methods in Engineering, 2012, 90(3): 287–310
Liu G R, Nguyen-Thoi T, Lam K Y. An edge-based smoothed finite element method (ES-FEM) for static, free and forced vibration analyses of solids. Journal of Sound and Vibration, 2009, 320(4–5): 1100–1130
Nguyen-Thoi T, Liu G R, Lam K Y, Zhang G Y. A face-based smoothed finite element method (FS-FEM) for 3D linear and geometrically non-linear solid mechanics problems using 4-node tetrahedral elements. International Journal for Numerical Methods in Engineering, 2009, 78(3): 324–353
Bletzinger K U, Bischoff M, Ramm E. A unified approach for shearlocking-free triangular and rectangular shell finite elements. Computers & Structures, 2000, 75(3): 321–334
Bathe K J, Dvorkin E N. A four-node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation. International Journal for Numerical Methods in Engineering, 1985, 21(2): 367–383
Tessler A, Hughes T J R. A three-node mindlin plate element with improved transverse shear. Computer Methods in Applied Mechanics and Engineering, 1985, 50(1): 71–101
Nguyen-Xuan H, Rabczuk T, Nguyen-Thanh N, Nguyen-Thoi T, Bordas S, Liu G R, Thai-Hoang C, Nguyen-Thoi T. An edge-based smoothed finite element method (ES-FEM) with stabilized discrete shear gap technique for analysis of Reissner–Mindlin plates. Computer Methods in Applied Mechanics and Engineering, 2010, 199(9–12): 471–489
Phan-Dao H H, Nguyen-Xuan H, Thai-Hoang C, Nguyen-Thoi T, Rabczuk T. An edge-based smoothed finite element method for analysis of laminated composite plates. International Journal of Computational Methods, 2013, 1340005: 1–27
Nguyen-Xuan H, Rabczuk T, Nguyen-Thanh N, Nguyen-Thoi T, Bordas S. A node-based smoothed finite element method with stabilized discrete shear gap technique for analysis of Reissner–Mindlin plates. Computational Mechanics, 2010, 46(5): 679–701
Nguyen-Thoi T, Phung-Van P, Thai-Hoang C, Nguyen-Xuan H. A cell-based smoothed discrete shear gap method (CS-DSG3) using triangular elements for static and free vibration analyses of shell structures. International Journal of Mechanical Sciences, 2013, 74 (0): 32–45
Nguyen-Thoi T, Bui-Xuan T, Phung-Van P, Nguyen-Hoang S, Nguyen-Xuan H. An edge-based smoothed three-node mindlin plate element (ES-MIN3) for static and free vibration analyses of plates. KSCE Journal of Civil Engineering, 2014, 18(4): 1072–1082
Nguyen-Thoi T, Phung-Van P, Luong-Van H, Nguyen-Van H, Nguyen-Xuan H. A cell-based smoothed three-node Mindlin plate element (CS-MIN3) for static and free vibration analyses of plates. Computational Mechanics, 2013, 51(1): 65–81
Nguyen-Xuan H, Nguyen-Thoi T. A stabilized smoothed finite element method for free vibration analysis of Mindlin–Reissner plates. Communications in Numerical Methods in Engineering, 2009, 25(8): 882–906
Dang-Trung H, Luong-Van H, Nguyen-Thoi T, Ang K K. Analyses of stiffened plates resting on viscoelastic foundation subjected to a moving load by a cell-based smoothed triangular plate element. International Journal of Structural Stability and Dynamics, 2016, 17 (1): 1750011
Luong-Van H, Nguyen-Thoi T, Liu G R, Phung-Van P. A cell-based smoothed finite element method using three-node shear-locking free Mindlin plate element (CS-FEM-MIN3) for dynamic response of laminated composite plates on viscoelastic foundation. Engineering Analysis with Boundary Elements, 2014, 42(0): 8–19
Phung-Van P, Nguyen-Thoi T, Bui-Xuan T, Lieu-Xuan Q. A cellbased smoothed three-node Mindlin plate element (CS-FEM-MIN3) based on the C-0-type higher-order shear deformation for geometrically nonlinear analysis of laminated composite plates. Computational Materials Science, 2015, 96: 549–558
Phung-Van P, Nguyen-Thoi T, Luong-Van H, Lieu-Xuan Q. Geometrically nonlinear analysis of functionally graded plates using a cell-based smoothed three-node plate element (CS-MIN3) based on the C-0-HSDT. Computer Methods in Applied Mechanics and Engineering, 2014, 270: 15–36
Nguyen-Thoi T, Rabczuk T, Ho-Huu V, Le-Anh L, Dang-Trung H, Vo-Duy T. An extended cell-based smoothed three-node mindlin plate element (XCS-MIN3) for free vibration analysis of cracked FGM plates. International Journal of Computational Methods, 2016, 14(2): 1750011
Shimpi R P, Patel H G. A two variable refined plate theory for orthotropic plate analysis. International Journal of Solids and Structures, 2006, 43(22–23): 6783–6799
Ye Z. Enhance variational asymptotic method for Unit Cell Homogenization. Dissertation for the Doctoral Degree. Logan: Utah State University, 2013
Acknowledgements
This research was funded by the University of Science, Vietnam National University Hochiminh City (VNU-HCM) under grant number T2015-3.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nguyen-Minh, N., Tran-Van, N., Bui-Xuan, T. et al. Static analysis of corrugated panels using homogenization models and a cell-based smoothed mindlin plate element (CS-MIN3). Front. Struct. Civ. Eng. 13, 251–272 (2019). https://doi.org/10.1007/s11709-017-0456-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-017-0456-0