Abstract
A finite element model simulating an experiment on unstiffened, overlapped circular hollow structure (CHS) K-joints was generated and validated by comparing the ultimate capacities, deformation processes and failure modes of the experimental results. Using this model, the stress distribution, propagation of plasticity and the failure modes of overlapped joints with through-brace-in-compression and welded hidden seams were analyzed. The effect of geometric parameters, with or without hidden welds, and the loading hierarchy reversal of braces on the ultimate capacity of the joints were also studied. The results of finite element parametric analysis indicate that the brace-to-chord thickness ratio has relatively large effects on the failure mechanism and ultimate capacity of overlapped joints. It was also found that the absence of hidden welds has less significance on the ultimate capacity of through-brace-in-compression joints than through-brace-in tension joints. Finally, based on the design equation of gap joints, a formula predicting the ultimate capacity of overlapped CHS K-joints was derived by applying multivariate regression analysis. Results from the proposed design equation are consistent with experimental results.
Similar content being viewed by others
References
Shu Xingping, Zhu Shaoning, Zhu Zhengrong, Study on ultimate capacity for overlapped CHS K-joints. Journal of Building Structure, 2004, 25(5): 71–77 (in Chinese)
Luo Yaozhi, Zhang Nan. Performance analysis and suggested equation for capacity for overlapped K-joints. Steel Structures, 2004, 19(3): 23–26 (in Chinese)
Dexter E M, Lee M M K. Static strength of axially loaded tubular K-joints I: behavior. Journal of Structure Engineering. ASCE, 1999, 125(2): 194–201
Dexter E M, Lee M M K. Static strength of axially loaded tubular K-joints II: ultimate capacity. Journal of Structure Engineering. ASCE, 1999, 125(2): 202–210
Gazzola F, Lee M M K, Dexter E M. Design equation for overlap tubular K-joints under axial loading. Journal of Structures Engineering, ASCE, 2000, 126(7): 798–808
Zhao Xianzhong, Chen Yu, Chen Yiyi, et al. Study of static behavior for overlapped CHS K-joints. Journal of Building Structure, 2006, 27(4): 23–29 (in Chinese)
Chen Yu. Static performance study for overlapped CHS K-joints. Dissertation for Doctoral Degree. Shanghai: Tongji University, 2006 (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Additional information
__________
Translated from Journal of Building Structures, 2006, 27(4): 30–36 [译自: 建筑结构学报]
Rights and permissions
About this article
Cite this article
Chen, Y., Zhao, X. & Chen, Y. Parametric analysis and design equation of ultimate capacity for unstiffened overlapped CHS K-joints. Front. Archit. Civ. Eng. China 2, 107–115 (2008). https://doi.org/10.1007/s11709-008-0014-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-008-0014-x