Frontiers in Energy

, Volume 12, Issue 2, pp 239–248 | Cite as

Effect of non-uniform illumination on performance of solar thermoelectric generators

Research Article
  • 30 Downloads

Abstract

Solar thermoelectric generators (STEGs) are heat engines which can generate electricity from concentrated sunlight. The non-uniform illumination caused by the optical concentrator may affect the performance of solar thermoelectric generators. In this paper, a three-dimensional finite element model of solar thermoelectric generators is established. The two-dimensional Gaussian distribution is employed to modify the illumination profiles incident on the thermoelectric generator. Six non-uniformities of solar illumination are investigated while keeping the total energy constant. The influences of non-uniform illumination on the temperature distribution, the voltage distribution, and the maximum output power are respectively discussed. Three thermoelectric generators with 32, 18 and 8 pairs of thermocouples are compared to investigate their capability under non-uniform solar radiation. The result shows that the non-uniformity of the solar illumination has a great effect on the temperature distribution and the voltage distribution. Central thermoelectric legs can achieve a larger temperature difference and generate a larger voltage than peripheral ones. The non-uniform solar illumination will weaken the capability of the TE generator, and the maximum output power decrease by 1.4% among the range of non-uniformity studied in this paper. Reducing the number of the thermoelectric legs for non-uniform solar illumination can greatly increase the performance of the thermoelectric generator.

Keywords

solar thermoelectric generators non-uniform solar illumination performance evaluation solar energy 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

This work was supported by the National Natural Science Foundation of China (Grant No.51590903).

References

  1. 1.
    Rowe D M. Thermoelectrics Handbook: Macro to Nano. Boca Raton: CRC Press, 2005CrossRefGoogle Scholar
  2. 2.
    Venkatasubramanian R, Siivola E, Colpitts T, O’Quinn B. Thin-film thermoelectric devices with high room-temperature figures of merit. Nature, 2001, 413(6856): 597–602CrossRefGoogle Scholar
  3. 3.
    Jang J Y, Tsai Y C. Optimization of thermoelectric generator module spacing and spreader thickness used in a waste heat recovery system. Applied Thermal Engineering, 2013, 51(1–2): 677–689CrossRefGoogle Scholar
  4. 4.
    Chen WH, Liao C Y, Hung C I, Huang WL. Experimental study on thermoelectric modules for power generation at various operating conditions. Energy, 2012, 45(1): 874–881CrossRefGoogle Scholar
  5. 5.
    Gomez M, Reid R, Ohara B, Lee H. Influence of electrical current variance and thermal resistances on optimum working conditions and geometry for thermoelectric energy harvesting. Journal of Applied Physics, 2013, 113(17): 174908CrossRefGoogle Scholar
  6. 6.
    Kraemer D, Poudel B, Feng H P, Caylor J C, Yu B. Highperformance flat-panel solar thermoelectric generators with high thermal concentration. Nature materials, 2011, 10(7): 532–538CrossRefGoogle Scholar
  7. 7.
    Lertsatitthanakorn C, Therdyothin A, Soponronnarit S. Performance analyses and economic evaluation of a hybrid thermoelectric solar water heater. Proceedings of the Institution of Mechanical Engineers. Part A, Journal of Power and Energy, 2010, 224(5): 621–627CrossRefGoogle Scholar
  8. 8.
    Chen W H, Wang C C, Hung C I, Yang C C, Juang R C. Modeling and simulation for the design of thermal-concentrated solar thermoelectric generator. Energy, 2014, 64: 287–297CrossRefGoogle Scholar
  9. 9.
    Moraes F S, Santos L C, Alencar R N, Sempels Éric V, Sandoval J C, Lesage F J. Solar thermoelectric generator performance relative to air speed. Energy Conversion and Management, 2015, 99: 326–333CrossRefGoogle Scholar
  10. 10.
    Rahbar N, Esfahani J A. Experimental study of a novel portable solar still by utilizing the heatpipe and thermoelectric module. Desalination, 2012, 284: 55–61CrossRefGoogle Scholar
  11. 11.
    Chen J. Thermodynamic analysis of a solar-driven thermoelectric generator. Journal of Applied Physics, 1996, 79(5): 2717–2721CrossRefGoogle Scholar
  12. 12.
    Baranowski L L, Snyder G J, Toberer E S. Concentrated solar thermoelectric generators. Energy & Environmental Science, 2012, 5(10): 9055–9067CrossRefGoogle Scholar
  13. 13.
    Amatya R, Ram R J. Solar thermoelectric generator for micropower applications. Journal of Electronic Materials, 2010, 39(9): 1735–1740CrossRefGoogle Scholar
  14. 14.
    Chen G. Theoretical efficiency of solar thermoelectric energy generators. Journal of Applied Physics, 2011, 109(10): 104908CrossRefGoogle Scholar
  15. 15.
    Candadai A A, Kumar V P, Barshilia H C. Performance evaluation of a natural convective-cooled concentration solar thermoelectric generator coupled with a spectrally selective high temperature absorber coating. Solar Energy Materials and Solar Cells, 2016, 145: 333–341CrossRefGoogle Scholar
  16. 16.
    Li P, Cai L, Zhai P, Tang X, Zhang Q. Design of a concentration solar thermoelectric generator. Journal of electronic materials, 2010, 39(9): 1522–1530CrossRefGoogle Scholar
  17. 17.
    Kraemer D, McEnaney K, Chiesa M, Chen G. Modeling and optimization of solar thermoelectric generators for terrestrial applications. Solar Energy, 2012, 86(5): 1338–1350CrossRefGoogle Scholar
  18. 18.
    Ming T, Wang Q, Peng K, Cai Z, Yang W. The influence of nonuniform high heat flux on thermal stress of thermoelectric power generator. Energies, 2015, 8(11): 12584–12602CrossRefGoogle Scholar
  19. 19.
    Suzuki R O, Ito K O, Oki S. Analysis of the performance of thermoelectric modules under concentrated radiation heat flux. Journal of Electronic Materials, 2016, 45(3): 1827–1835CrossRefGoogle Scholar
  20. 20.
    Admasu B T, Luo X, Yao J. Effects of temperature non-uniformity over the heat spreader on the outputs of thermoelectric power generation system. Energy Conversion and Management, 2013, 76: 533–540CrossRefGoogle Scholar
  21. 21.
    Xiao J, Yang T, Li P, Zhai P, Zhang Q. Thermal design and management for performance optimization of solar thermoelectric generator. Applied Energy, 2012, 93: 33–38CrossRefGoogle Scholar
  22. 22.
    Antonova E E, Looman D C. Finite elements for thermoelectric device analysis in ANSYS. In: 24th International Conference on Thermoelectrics, 2005Google Scholar
  23. 23.
    Deng Y, Zhu W, Wang Y, Shi Y. Enhanced performance of solardriven photovoltaic–thermoelectric hybrid system in an integrated design. Solar Energy, 2013, 88: 182–191CrossRefGoogle Scholar

Copyright information

© Higher Education Press and Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.MIIT Key Laboratory of Thermal Control of Electronic Equipment, School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjingChina
  2. 2.IMIIT Key Laboratory of Thermal Control of Electronic Equipment, School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjingChina
  3. 3.School of Energy and PowerNanjing University of Aeronautics and AstronauticsNanjingChina

Personalised recommendations