Frontiers in Energy

, Volume 11, Issue 2, pp 119–125 | Cite as

Impact of renewable energies on the operation and economic situation of coal fired power stations: Actual situation of coal fired power stations in Germany

  • Hans-Joachim Krautz
  • Alexander Lisk
  • Joachim Posselt
  • Christian Katzer
Research Article
  • 90 Downloads

Abstract

Due to the fluctuating character of the renewable energy sources the demand of conventional power plants for flexibility is increasing. In the recent years, in Germany there has been a fast rise of production capacity of renewable energies, especially from wind turbines, photovoltaic installations, and biomass plants. The installed nominal power of wind turbines is actually (December 2016) 42 GW and of photovoltaic installations 40 GW. The renewable electric energy production in Germany is about 190 TWh/a, which represents a share of 33% of the yearly demand. The increased need for flexibility affects both the power gradients as well as the minimum load of conventional power plants. Due to this flexibility behaviour, conventional power plants are faced with problems concerning the durability of power plant components, corrosion, more maintenance effort and consequently the overall life expectancy. Another consequence of the increasing share of renewable energies is the decreasing full load operating hours, especially of coal fired and gas power plants. Along with decreasing revenues from the energy exchange market, coal fired power plants are faced with new economically challenges.

Keywords

flexible load operation minimal load power gradients power plant maintenance corrosion life expectancy 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Mohrbach L. Status Report Nuclear in Europe. VGB PowerTech, 2016Google Scholar
  2. 2.
    Henning H M, Palzer A. Energy System Germany 2050 Fraunhofer Institut for Solar Energy Systems ISE, Freiburg, 2013-11-13, https://www.ise.fraunhofer.de/content/dam/ise/de/documents/publications/ studies/Fraunhofer-ISE_Energiesystem-Deutschland-2050. pdfGoogle Scholar
  3. 3.
    Information for the convertion of the ABLaV Novella: Publication of the simple basic agreement for disconnectable loads. Sehr geehrte Damen und Herren, www.regelleistung.netGoogle Scholar
  4. 4.
    Benato A, Bracco S, Stoppato A, Mirandola A. Dynamic simulation of combined cycle power plant cycling in the electricity market. Energy Conversion and Management, 2016, 107: 76–85CrossRefGoogle Scholar
  5. 5.
    Lefton S A, Hilleman D. Make your plant ready for cycling operations. Power, 2011, 155(8): 1–6Google Scholar
  6. 6.
    Bader M. Modern choice of construction materials for boiler and pipeline. 30th FDBR-Conference on Pipeline Technology, Magdeburg, 2015Google Scholar
  7. 7.
    Moreea-Taha R. Materials development for coal, biomass and waste fuel plants. IEA Clean Coal Centre, 2002-09Google Scholar
  8. 8.
    Hesler B S, Power E. Mitigating the effects of flexible operation on coal-fired power plants from baseload to flexible operation. Power, 2011, 155(8): 50Google Scholar
  9. 9.
    Lefton S A, Besuner P M, Grimsrud G P. The real cost of cycling power plants: What you don’t know will hurt you. Power, 2002, 146(8): 29–34Google Scholar
  10. 10.
    Lechner S. Investigations for the Calculation and Optimization of the Heat Transfer in the Case of the Pressurized Steam Fluidized Bed Drying for the Example of Lusatian Lignite. Dissertation for the Doctoral Degree. Cottbus: Brandenburg University of Technology Cottbus-Senftenberg, 2012Google Scholar
  11. 11.
    Asegehegn T W. Investigation of bubble hydrodynamics in gas-solid fluidized beds containing immersed horizontal tube banks for lignite drying application. Dissertation for the Doctoral Degree. Cottbus: Brandenburg University of Technology Cottbus-Senftenberg, 2012Google Scholar
  12. 12.
    Schreiber M. Modelling of Hydrodynamics and Heat Transfer in Bubble Forming Fluidized Bed Layers for the Drying of Lignite. Dissertation for the Doctoral Degree. Cottbus: Brandenburg University of Technology, 2013Google Scholar
  13. 13.
    Höhne O. Basic Investigations on the Influence of the System Pressure on the Drying Process of Lignite with Steam. Dissertation for the Doctoral Degree. Cottbus: Brandenburg University of Technology, 2012Google Scholar
  14. 14.
    Messerle V E, Karpenko E I, Ustimenko A B. Plasma assisted power coal combustion in the furnace of utility boiler: numerical modeling and full-scale test. Fuel, 2014, 126: 294–300CrossRefGoogle Scholar
  15. 15.
    Kanilo P M, Kazantsev V I, Rasyuk N I, Schünemann K, Vavriv D M. Microwave plasma combustion of coal. Fuel, 2003, 82(2): 187–193CrossRefGoogle Scholar
  16. 16.
    Katzer C, Klatt M, Lisk A, Krautz H-J. First investigation results from an electric ignition system for a pulverized coal-burner system, 27. German Flame Day 2015, VDI-Report 2267Google Scholar
  17. 17.
    Heimann G. Successful erection and commissioning of a dry lignite firing system with plasma-induced ignition. VGB PowerTech, 2016, 7: 40–44Google Scholar
  18. 18.
    Leisse A, Rehfeldt S, Meyer D. Ignition behaviour of pulverised solid fuel particles at hot surfaces. VGB PowerTech, 2014, 11: 45–49Google Scholar
  19. 19.
    Stoll B, Huwa W, Lüpke M, Leisse A. Lighting-up of pulverised solid fuels at electrically heated fuel nozzles. VGB PowerTech, 2016, 9: 74–78Google Scholar

Copyright information

© Higher Education Press and Springer-Verlag Berlin Heidelberg 2017

Authors and Affiliations

  • Hans-Joachim Krautz
    • 1
  • Alexander Lisk
    • 1
  • Joachim Posselt
    • 1
  • Christian Katzer
    • 1
  1. 1.Department for Power Plant TechnologyBrandenburg University of Technology Cottbus–SenftenbergCottbusGermany

Personalised recommendations