Frontiers of Materials Science

, Volume 10, Issue 4, pp 335–345 | Cite as

On the Taylor principles for plastic deformation of polycrystalline metals

Research Article
  • 75 Downloads

Abstract

Grain orientation evolutions and texture formation based on the Taylor principles offer important references to reveal crystallographic mechanisms of deformation behaviors. Strain equilibrium between grains is achieved in Taylor theory, however, stress equilibrium has not yet been reached perfectly even in many modifications of the theory though the textures predicted become very close to those of experimental observations. A reaction stress model is proposed, in which mechanical interactions between grains are considered in details and grain deformation is conducted by penetrating and non-penetrating slips. The new model offers both of the stress and strain equilibria and predicts the same textures indicated by Taylor theory. The rolling texture simulated comes very close to the experimental observations if the relaxation effect of the non-penetrating slips on the up-limits of reaction stresses is included. The reaction stress principles open theoretically a new field of vision to consider deformation behaviors of polycrystalline materials, whereas the Taylor principles become unnecessary both theoretically and practically. Detailed engineering conditions have to be included in simulations if the deformation textures of industrial products should be predicted.

Keywords

Taylor principles micormechanical equilibrium plastic deformation dislocation slip texture simulation 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Sachs G. Zur Ableitung einer Fließbedingdung. Zeitschrift des Vereines deutscher Ingeniere, 1928, 72: 732–736Google Scholar
  2. [2]
    Taylor G I. Plastic strain in metals. Journal of the Institute of Metals, 1938, 62: 307–324Google Scholar
  3. [3]
    Hirsch J, Lücke K. Mechanism of deformation and development of rolling texture in polycrystalline fcc metals — II. Acta Metallurgica, 1988, 36(11): 2883–2904CrossRefGoogle Scholar
  4. [4]
    Bishop J F W, Hill R. A theory of the plastic distribution of a polycrystalline aggregate under combined stresses. Philosophical Magazine, 1951, 42(327): 414–427Google Scholar
  5. [5]
    Kocks U F. The relation between polycrystal deformation and single-crystal deformation. Metallurgical & Materials Transactions B, 1970, 1(5): 1121–1143CrossRefGoogle Scholar
  6. [6]
    Lin T H. Analysis of elastic and plastic strains of a face-centered cubic crystal. Journal of the Mechanics and Physics of Solids, 1957, 5(2): 143–149CrossRefGoogle Scholar
  7. [7]
    Chapuis A, Liu Q. Simulations of texture evolution for HCP metals: Influence of the main slip systems. Computational Materials Science, 2015, 97: 121–126CrossRefGoogle Scholar
  8. [8]
    Leffers T. A modified Sachs approach to the plastic deformation of polycrystals as a realistic alternative to the Taylor mode. In: Haasen P, Gerold V, Kostorz G, eds. The Fifth International Conference on the Strength of Metals and Alloys, 1979, 769–774CrossRefGoogle Scholar
  9. [9]
    Mao W. Modeling of rolling texture in aluminum. Materials Science and Engineering A, 1998, 257(1): 171–177CrossRefGoogle Scholar
  10. [10]
    Mao W. Intergranular mechanical equilibrium during the rolling deformation of polycrystalline metals based on Taylor principles. Materials Science and Engineering A, 2016, 672: 129–134CrossRefGoogle Scholar
  11. [11]
    Lebensohn R A, Tomé C N, Castañeda P P. Self-consistent modelling of the mechanical behaviour of viscoplastic polycrystals incorporating intragranular field fluctuations. Philosophical Magazine, 2007, 87(28): 4287–4322CrossRefGoogle Scholar
  12. [12]
    Engler O, Schäfer V, Brinkman H J. Crystal-plasticity simulation of the correlation of microtexture and roping in AA 6xxx Al–Mg–Si sheet alloys for automotive applications. Acta Materialia, 2012, 60(13–14): 5217–5232CrossRefGoogle Scholar
  13. [13]
    Van Houtte P, Li S, Seefeldt M, et al. Deformation texture prediction: from the Taylor model to the advanced lamel model. International Journal of Plasticity, 2005, 21(3): 589–624CrossRefGoogle Scholar
  14. [14]
    Xie Q, Van Bael A, Sidor J, et al. A new cluster-type model for the simulation of textures of polycrystalline metals. Acta Materialia, 2014, 69(5): 175–186CrossRefGoogle Scholar
  15. [15]
    Crumbach M, Goerdeler M, Gottstein G. Modelling of recrystallisation textures in aluminium alloys. Acta Materialia, 2006, 54 (12): 3275–3289CrossRefGoogle Scholar
  16. [16]
    Mu S, Tang F, Gottstein G. A cluster-type grain interaction deformation texture model accounting for twinning-induced texture and strain-hardening evolution: Application to magnesium alloys. Acta Materialia, 2014, 68(15): 310–324CrossRefGoogle Scholar
  17. [17]
    Saleh A A, Haase C, Pereloma E V, et al. On the evolution and modelling of brass-type texture in cold-rolled twinning-induced plasticity steel. Acta Materialia, 2014, 70: 259–271CrossRefGoogle Scholar
  18. [18]
    Mao W, Yu Y. Reaction stress model and relaxation of reaction stress among the grains during tensile deformation of fcc metals. Materials Science Forum, 2005, 495–497: 995–1000CrossRefGoogle Scholar
  19. [19]
    Zhao Z, Mao W, Roters F, et al. A texture optimization study for minimum earing in aluminum by use of a texture component crystal plasticity finite element method. Acta Materialia, 2004, 52 (4): 1003–1012CrossRefGoogle Scholar
  20. [20]
    Roters F, Eisenlohr P, Hantcherli L, et al. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications. Acta Materialia, 2010, 58(4): 1152–1211CrossRefGoogle Scholar
  21. [21]
    Lebensohn R A, Rollet A D, Suquet P. Fast Fourier transformbased modeling for the determination of micromechanical fields in polycrystals. JOM, 2011, 63(3): 13–18CrossRefGoogle Scholar
  22. [22]
    Delannay L, Jacques P J, Kalidindi S R. Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons. International Journal of Plasticity, 2006, 22(10): 1879–1898CrossRefGoogle Scholar
  23. [23]
    Zecevic M, Knezevic M, Beyerlein I J, et al. Texture formation in orthorhombic alpha-uranium under simple compression and rolling to high strains. Journal of Nuclear Materials, 2016, 473: 143–156CrossRefGoogle Scholar
  24. [24]
    Mao W, Yu Y. Effect of elastic reaction stress on plastic behaviors of grains in polycrystalline aggregate during tensile deformation. Materials Science and Engineering A, 2004, 367(1–2): 277–281CrossRefGoogle Scholar
  25. [25]
    Hornbogen E, Warlimont H. Metallkunde. 2nd ed. New York: Springer-Verlag, 1991, 204CrossRefGoogle Scholar
  26. [26]
    Truszkowski W, Król J, Major B. Inhomogeneity of rolling texture in fcc metals. Metallurgical Transactions A: Physical Metallurgy and Materials Science, 1980, 11(5): 749–758CrossRefGoogle Scholar

Copyright information

© Higher Education Press and Springer-Verlag Berlin Heidelberg 2016

Authors and Affiliations

  1. 1.School of Materials and MetallurgyInner Mongolia University of Science and TechnologyBaotouChina
  2. 2.Department of MaterialsUniversity of Science and Technology BeijingBeijingChina

Personalised recommendations