Abstract
The extractive dividing-wall column (EDWC) is one of the most efficient technologies for separation of azeotropic or close boiling-point mixtures, but its design is fairly challenging. In this paper we extend the hybrid feasible path optimisation algorithm (Ma Y, McLaughlan M, Zhang N, Li J. Computers & Chemical Engineering, 2020, 143: 107058) for such optimal design. The tolerances-relaxation integration method is refined to allow for long enough integration time that can ensure the solution of the pseudo-transient continuation simulation close to the steady state before the required tolerance is used. To ensure the gradient and Jacobian information available for optimisation, we allow a relaxed tolerance for the simulation in the sensitivity analysis mode when the simulation diverges under small tolerance. In addition, valid lower bounds on purity of the recycled entrainer and the vapour flow rate in column sections are imposed to improve computational efficiency. The computational results demonstrate that the extended hybrid algorithm can achieve better design of the EDWC compared to those in literature. The energy consumption can be reduced by more than 20% compared with existing literature report. In addition, the optimal design of the heat pump assisted EDWC is achieved using the improved hybrid algorithm for the first time.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Gerbaud V, Rodriguez Donis I, Hegely L, Lang P, Denes F, You X. Review of extractive distillation. Process design, operation, optimization and control. Chemical Engineering Research & Design, 2019, 141: 229–271
Schultz M A, Stewart D G, Harris J M, Rosenblum S P, Shakur M S, O’Brien D E. Reduce costs with dividing-wall columns. Chemical Engineering Progress, 2002, 98: 64–71
Hernández S. Analysis of energy-efficient complex distillation options to purify bioethanol. Chemical Engineering & Technology, 2008, 31(4): 597–603
Tavan Y, Riazi S H, Nozohouri M. Energy optimization and comparative study of pre- and post-fractionator extractive dividing wall column for the CO2 ethane azeotropic process. Energy Conversion and Management, 2014, 79: 590–598
Staak D, Grützner T. Process integration by application of an extractive dividing-wall column: an industrial case study. Chemical Engineering Research & Design, 2017, 123: 120–129
Cordeiro G M, de Figueirêdo M F, Ramos W B, Sales F A, Brito K D, Brito R P. Systematic strategy for obtaining a dividing-wall column applied to an extractive distillation process. Industrial & Engineering Chemistry Research, 2017, 56(14): 4083–4094
Kiss A A, Suszwalak D J P C. Enhanced bioethanol dehydration by extractive and azeotropic distillation in dividing-wall columns. Separation and Purification Technology, 2012, 86: 70–78
Bravo Bravo C, Segovia Hernández J G, Gutiérrez Antonio C, Durán A L, Bonilla Petriciolet A, Briones Ramírez A. Extractive dividing wall column: design and optimization. Industrial & Engineering Chemistry Research, 2010, 49(8): 3672–3688
Gutiérrez Guerra R, Segovia Hernández J G, Hernández S. Reducing energy consumption and CO2 emissions in extractive distillation. Chemical Engineering Research & Design, 2009, 87(2): 145–152
Biegler L T. New nonlinear programming paradigms for the future of process optimization. AIChE Journal. American Institute of Chemical Engineers, 2017, 63(4): 1178–1193
Powell M J D. A fast algorithm for nonlinearly constrained optimization calculations. In: Watson G A, ed. Proceedings of the Numerical Analysis. Berlin: Springer, 1978, 144–157
Aspen Technology Inc. Aspen Plus User’s Guide Version V8.8. 2015
Loy Y Y, Lee X L, Rangaiah G P. Bioethanol recovery and purification using extractive dividing-wall column and pressure swing adsorption: an economic comparison after heat integration and optimization. Separation and Purification Technology, 2015, 149: 413–427
Yang A, Wei R, Sun S, Wei S, Shen W, Chien I L. Energy-saving optimal design and effective control of heat integration-extractive dividing wall column for separating heterogeneous mixture methanol/toluene/water with multiazeotropes. Industrial & Engineering Chemistry Research, 2018, 57(23): 8036–8056
Vikse M, Watson H A J, Kim D, Barton P I, Gundersen T. Optimization of a dual mixed refrigerant process using a nonsmooth approach. Energy, 2020, 196: 116999
Dowling A W, Biegler L T. A framework for efficient large scale equation-oriented flowsheet optimization. Computers & Chemical Engineering, 2015, 72: 3–20
Ma Y, Luo Y, Yuan X. Simultaneous optimization of complex distillation systems with a new pseudo-transient continuation model. Industrial & Engineering Chemistry Research, 2017, 56(21): 6266–6274
Ma Y, Luo Y, Ma X, Yang T, Chen D, Yuan X. Fast algorithms for flowsheet simulation and optimization using psdueo-transient models. Industrial & Engineering Chemistry Research, 2018, 57(42): 14124–14142
Waltermann T, Grueters T, Muenchrath D, Skiborowski M. Efficient optimization-based design of energy-integrated azeotropic distillation processes. Computers & Chemical Engineering, 2020, 133: 106676
Ma Y, McLaughlan M, Zhang N, Li J. Novel feasible path optimization algorithms using steady-state and dynamic models. Computers & Chemical Engineering, 2020, 143: 107058
Luyben W L. Control of the maximum-boiling acetone/chloroform azeotropic distillation System. Industrial & Engineering Chemistry Research, 2008, 47(16): 6140–6149
Kiss A A, Ignat R M. Innovative single step bioethanol dehydration in an extractive dividing-wall column. Separation and Purification Technology, 2012, 98: 290–297
Luo H, Bildea C S, Kiss A A. Novel heat-pump-assisted extractive distillation for bioethanol purification. Industrial & Engineering Chemistry Research, 2015, 54(7): 2208–2213
Pattison R C, Baldea M. Equation-oriented flowsheet simulation and optimization using pseudo-transient models. AIChE Journal. American Institute of Chemical Engineers, 2014, 60(12): 4104–4123
Pattison R C, Gupta A M, Baldea M. Equation-oriented optimization of process flowsheets with dividing-wall columns. AIChE Journal. American Institute of Chemical Engineers, 2016, 62(3): 704–716
Dowling A W, Biegler L T. Rigorous optimization-based synthesis of distillation cascades without integer variables. Computer-Aided Chemical Engineering, 2014, 33: 55–60
Biegler L T. Nonlinear Programming: Concepts, Algorithms, and Applications to Chemical Processes. Philadelphia: Society for Industrial and Applied Mathematics, 2010, 160–161
Biegler L T, Hughes R R. Feasible path optimization with sequential modular simulators. Computers & Chemical Engineering, 1985, 9(4): 379–394
Higham N J. Accuracy and Stability of Numerical Algorithms. 2nd ed. Philadelphia: Society for Industrial and Applied Mathematics, 2002, 3–4
Aspen Technology Inc. Aspen Custom Modeler User’s Guide Version V8.8. 2015
Python Software Foundation. Python language reference version 3.6. 2016
Kraft D. A software package for sequential quadratic programming. Braunschweig, Köln: DFVLR, 1988
Aurangzeb M, Jana A K. A novel heat integrated extractive dividing wall column for ethanol dehydration. Industrial & Engineering Chemistry Research, 2019, 58(21): 9109–9117
Suszwalak D J P C, Kiss A A. Enhanced bioethanol dehydration in extractive dividing-wall columns. Computer-Aided Chemical Engineering, 2012, 30: 667–671
Aurangzeb M, Jana A K. Double-partitioned dividing wall column for a multicomponent azeotropic system. Separation and Purification Technology, 2019, 219: 33–46
Luyben W L. Distillation Design and Control Using Aspen Simulation. Hoboken: John Wiley & Sons, 2006, 87–89
Acknowledgements
The authors would like to thank the financial support from China Scholarship Council-The University of Manchester Joint scholarship (Grant No. 201809120005). Cuiwen Cao would like to thank the financial support from the National Natural Science Foundation of China (Grant No. 61673175).
Author information
Authors and Affiliations
Corresponding author
Electronic Supplementary Material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Ma, Y., Zhang, N., Li, J. et al. Optimal design of extractive dividing-wall column using an efficient equation-oriented approach. Front. Chem. Sci. Eng. 15, 72–89 (2021). https://doi.org/10.1007/s11705-020-1977-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11705-020-1977-y