Abstract
The flour, native starch and modified starches produced from three pro-vitamin A cassava cultivars were studied for their properties. Loose (0.51–0.54 g/mL) and packed (0.58–0.71 g/mL) bulk densities of cassava flours were significantly lower than that for starches, which were 0.53–0.79 g/mL and 0.67–1.01 g/mL, respectively. Modifications by annealing, heat-moisture treatment (HMT), and citric acid crosslinking generally increased porosity. The starch granules were predominantly small-sized (1–10 µm), round shaped and had normal distribution of granule diameter. Citric acid crosslinking caused scathing of starch granules and significantly reduced lightness (L*) and whiteness (% W) of the starches. The flours had higher crude protein and ash, but lower nitrogen free extract and apparent amylose than starches. Water absorption capacity (WAC), alkaline water retention (AWR) and swelling power were significantly reduced by annealing, but significantly increased by HMT and citric acid cross-linking. The modifications variably influenced oil absorption capacity (OAC) depending on cultivar. The cassava flours and native starches formed gels at low concentration (2%), but annealing, HMT, and citric acid crosslinking of starch increased the concentration required to initiate gel formation to 2–6%, 6–8%, and 10–20%, respectively. Paste clarity (% T) was significantly lower for flours (5.4–27.6%) than starches (2.3–57.5%) and was reduced by the modifications. Pasting properties differed significantly with modifications and cultivars. All modifications significantly reduced breakdown and setback viscosity. Citric acid crosslinking specifically reduced pasting temperature, and reinforced starch endurance to shear.
Similar content being viewed by others
References
B. Gu, Q. Yao, K. Li, S. Chen, Change in physicochemical traits of cassava roots and starches associated with genotypes and environmental factors. Starch/Stärke 65, 253–263 (2013)
F. Zhu, Composition, structure, physicochemical properties, and modifications of cassava starch. Carbohydr. Polym. 122, 456–490 (2015)
F.E. Ortega-Ojeda, H. Larsson, A.C. Eliasson, Gel formation in mixtures of hydrophobically modified potato and high amylopectin potato starch. Carbohydr. Polym. 59, 313–327 (2005)
R. Hoover, T. Hughes, H.J. Chung, Q. Liu, Composition, molecular structure, properties, and modification of pulse starches: a review. Food Res. Int. 43, 399–413 (2010)
R. Hoover, The impact of heat-moisture treatment on molecular structures and properties of starches isolated from different botanical sources. Crit. Rev. Food Sci. Nutr. 50, 835–847 (2010)
K. S. Woo, Cross-linked, RS4 type resistant starch: preparation and properties. PhD Thesis. Kansas State University Manhattan, (1999)
B. Maziya-Dixon, A.A. Adebowale, O.O. Onabanjo, A.G.O. Dixon, Effect of variety and drying methods on physico-chemical properties of high quality cassava flour from yellow cassava roots. Afr. Crop Sci. Conf. Proc. 7, 635–641 (2005)
I.R.M. Benesi, M.T. Labuschagne, A.G.O. Dixon, N.M. Mahungu, Stability of native starch quality parameters, starch extraction and root dry matter of cassava genotypes in different environments. J. Sci. Food Agric. 84, 1381–1388 (2004)
H. Jacobs, J.A. Delcour, Hydrothermal modification of granular starch with retention of granular structure: a review. J. Agric. Food Chem. 46, 2895–2905 (1998)
M.L. Franco, S.J.R. Preto, F.C. Ciacco, D.Q. Tavares, Effect of the heat-moisture treatment on the enzymatic susceptibility of corn starch granules. Starch/Stärke 47(6), 223–228 (1995)
H. Klaushofer, E. Berghofer, W. Steyrer, Starch citrates—production and technical application properties. Starch 30, 47–51 (1978)
WHO (2012). Bulk density and tapped density of powders (S.3.6) Document QAS/11.450 FINAL. https://www.who.int/medicines/publications/pharmacopoeia/Bulk-tapped-densityQAS11_450FINAL_MODIFIEDMarch2012.pdf. Accessed 12 June 2017
R.L. Carr, Evaluating flow properties of solids. Chem. Eng. 72, 163–168 (1965)
K.O. Falade, O.E. Ayetigbo, Effects of annealing, acid hydrolysis and citric acid modifications on physical and functional properties of starches from four yam (Dioscorea spp.) cultivars. Food Hydrocoll. 43, 529–539 (2015)
J. Singh, O.J. McCarthy, H. Singh, Physico-chemical and morphological characteristics of New Zealand Taewa (Maori potato) starches. Carbohydr. Polym. 64, 569–581 (2006)
R.W.G. Hunt, Measuring Colour, 2nd edn. (Ellis Horwood, New York, 1991), pp. 75–76
J. Gonnet, Colour effects of co-pigmentation of anthocyanins revisited 2. A colourimetric look at the solutions of cyanin copigmented by rutin using the CIELAB scale. Food Chem. 66, 387–394 (1999)
R.G. McGuire, Reporting of objective color measurements. Hort. Sci. 27, 1254–1255 (1992)
D.H. Voss, Relating colorimeter measurement of plant color to the royal horticultural society color chart. Hort. Sci. 27, 1256–1260 (1992)
A.S. Sokhey, R. Chinnaswamy, Chemical and molecular properties of irradiated starch extrudates. Cereal Chem. 70(3), 260–268 (1993)
AOAC, Official methods of analysis of AOAC international, 18th edn. (AOAC Inc., Gaithersburg, 2010), p. 2590
R. Hoover, W.S. Ratnayake, Starch characteristics of black bean, chick pea, lentil, navy bean and pinto bean cultivars grown in Canada. Food Chem. 78, 489–498 (2002)
S.K. Sathe, S.S. Deshpande, D.K. Salunkhe, Functional properties of winged bean (Psophocarpus tetragonolobus, L) proteins. J. Food Sci. 47(2), 503–509 (1982)
C.W. Coffmann, V.V. Garcia, Functional properties and ammo acid content of a protein isolate from mung bean flour. Int. J. Food Sci. Technol. 12, 473–484 (1977)
S.K. Sathe, D.K. Salunkhe, Functional properties of great northern bean (Phaseolus vulgaris) proteins: Emulsion, foaming, viscosity and gelation properties. J. Food Sci. 46, 71–81 (1981)
K.O. Adebowale, B.I. Olu-Owolabi, O.O. Olayinka, O.S. Lawal, Effect of heat-moisture treatment and annealing on physicochemical properties of red sorghum starch. African J. of Biotech. 4(9), 928–933 (2005)
N. Ashveen, R.P. Charan, R. David, J.R. Khurma, Isolation and properties of starch from some local cultivars of cassava and taro in Fiji. The South Pac. J. Nat. Sci. 26, 45–48 (2008)
J.G. Waramboi, S. Dennien, M.J. Gidley, P.A. Sopade, Characterization of sweet potato from Papua New Guinea and Australia: physicochemical, pasting and gelatinization properties. Food Chem. 126, 1759–1770 (2011)
G.C. Orkwor, The importance of yams, in Food yams, Advances in research, ed. by G.C. Orkwor, R. Asiedu, I.J. Ekanaye (IITA and NRCRI, Nigeria, 1998), pp. 1–12
K. Sriroth, V. Santisopasri, C. Petchalanuwat, K. Kurotjanawong, K. Piyachomkwan, C.G. Oates, Cassava starch granule structure-function properties: influence of time and conditions at harvest on four cultivars of cassava starch. Carbohydr. Polym. 38, 161–170 (1999)
S. Shanavas, Studies on modified tuber starches useful for tablets and capsules. Ph.D. thesis (Biochemistry), University of Kannur. Division of crop utilization, central tuber crops research institute, Thiruvananthapuram, Kerala, India, 1–254 (2013)
C.K. Riley, S.A. Adebayo, A.O. Wheatley, H.N. Asemota, The interplay between yam (Dioscorea spp.) starch botanical source, micromeritics and functionality in paracetamol granules for reconstitution. Eur. J. Pharm. Biopharm. 70 , 326–334 (2008)
S.V. Gomand, L. Lamberts, L.J. Derde, H. Goesaert, G.E. Vandeputte, B. Goderis, R.G.F. Visser, J.A. Delcour, Structural properties and gelatinization characteristics of potato and cassava starches and mutants thereof. Food Hydrocoll. 24, 307–317 (2010)
L. Degras, L'igname: Plante a tubercule tropicale. Techniques Agricoles et Productions tropicale, 36 edn. (Maisonneuve et Larose, Paris, 1986), p. 408
K. Svegmark, A.M. Hermansson, Microstructure and rheological properties of composites of potato starch granules and amylose: a comparison of observed and predicted structure. Food Structure 12, 181–193 (1993)
S. Moorthy, Tuber crop starches. Tech. Bull. No. 18 CTCRI, Trivandrum (2002a)
P. Chatakanonda, R. Wansuksri, K. Sriroth, Impact of annealing on susceptibility to acid hydrolysis and physico-chemical properties of cassava starch. Kasetsart J. Nat. Sci. 45, 284–294 (2011)
E. Nuwamanya, Y. Baguma, N. Emmambux, J. Taylor, R. Patrick, Physicochemical and functional characteristics of cassava starch in Ugandan varieties and their progenies. J. Plant Breed. Crop Sci. 2(1), 001–011 (2010)
H. Ceballos, K. Fahrney, R. Howeler, B. Ospina, Cassava potential for bioethanol. Symposium- Biofuels in Developing Countries: Opportunities and Risks, pp. 625–628 (2008)
D.E. Mweta, Physicochemical, functional and structural properties of native Malawian cocoyam and sweet potato starches. PhD. Thesis, Dept. of chemistry and plant sciences, University of the Free State, Bloemfontein, SA.,1–200 (2009)
K.O. Falade, O.E. Ayetigbo, Effects of tempering (annealing), acid hydrolysis, low-citric acid substitution on chemical and physicochemical properties of starches of four yam (Dioscorea spp.) cultivars. J. Food Sci. Technol. 54 (6), 1455–1466 (2017)
S.N. Moorthy, Physicochemical and functional properties of tropical tuber starches: a review. Starch/Stärke 54, 559–592 (2002)
S.A. Aldana, F.A. Quintero, Physicochemical characterization of two cassava (Manihot esculenta Crantz) starches and flours. Sci. agroaliment. 1, 19–25 (2013)
C.F. Ciacco, B.L. D’Appolonia, Baking studies with cassava and yam flour I. Biochemical composition of cassava and yam flour. Cereal chem. 55(3), 402–411 (1978)
K.O. Adebowale, T. Henle, U. Schwarzenbolz, T. Doert, Modification and properties of African yam bean (Sphenostylis stenocarpa Hochst. Ex A. Rich.) Harms starch I: Heat-moisture treatments and Annealing. Food Hydrocoll. 23, 1947–1957 (2009)
H. Liu, M. Lv, L. Wang, Y. Li, H. Fan, M. Wang, Comparative study: How annealing and heat-moisture treatment affect the digestibility, textural, and physicochemical properties of maize starch. Starch/Stärke 68, 1158–1168 (2016)
K.O. Adebowale, O.S. Lawal, Microstructure, physicochemical properties and retrogradation behaviour of Mucuna bean (Mucuna pruriens) starch on heat-moisture treatments. Food Hydrocoll. 17, 265–272 (2003)
P.I. Akubor, Effect of ascorbic acid and citric acid treatments on the functional and sensory properties of yam flour. Int. J. Agric. Pol. Res. 1(4), 103–108 (2013)
J. J. M. Swinkels, Sources of starch, its chemistry and physic. In Starch conversion technology, ed. By G.M. Van Beynum, J. A. Roel, (Marcel Dekker, New York, 1985) pp. 15–46
T.E. Abraham, Stabilization of paste viscosity of cassava starch by heat-moisture treatment. Starch/Stärke 45(4), 131–135 (1993)
M.J. Miles, V.J. Morris, S.G. Ring, Gelation of amylose. Carbohydr. Res. 135, 257 (1985)
A.N. Jyothi, S.N. Moorthy, J.N. Sreekumar, K.N. Rajasekharan, Studies on the properties of citrate derivatives of cassava (Manihot esculenta Crantz) starch synthesized by microwave technique. J. Sci. Food Agric. 87, 871–879 (2007)
R. Hormdok, A. Noomhorm, Hydrothermal treatments of rice starch for improvement of rice noodle quality. LWT—Food Sci. Technol. 40(10), 1723–1731 (2007)
A.M.M. Gomes, C.E. Mendes da Silva, N.M.P.S. Ricardo, Effects of annealing on the physicochemical properties of fermented cassava starch (polvilho azedo). Carbohydr. Polym. 60, 1–6 (2005)
K.M. Chung, T.W. Moon, L.K. Chun, Influence of annealing on gel properties of mung bean starch. Cereal Chem. 77(5), 567–571 (2000)
S.O. Agboola, J.O. Akingbala, G.B. Oguntimehin, Physicochemical and functional properties of low DS cassava starch acetates and citrates. Starch/Stärke 43(2), 62–66 (1991)
Acknowledgement
Author Kolawole O. Falade is grateful to the University of Ibadan, Ibadan for the award of the Senate Research Grant SRG/FT/2010/7A.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interests
All authors declare that they have no conflict of interests.
Rights and permissions
About this article
Cite this article
Falade, K.O., Ibanga-Bamijoko, B. & Ayetigbo, O.E. Comparing properties of starch and flour of yellow-flesh cassava cultivars and effects of modifications on properties of their starch. Food Measure 13, 2581–2593 (2019). https://doi.org/10.1007/s11694-019-00178-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11694-019-00178-5