Abstract
The present case study involves a thorough and methodical metallurgical analysis of a failed water wall tube to identify sulfidation corrosion as the cause of failure. The investigation into the failure of the water wall tube was conducted through various methods, including visual observation, chemical analysis, examinations using optical and scanning electron microscopy, fractography and surface analysis via SEM–EDS, x-ray diffraction analysis of deposits and reaction products, and evaluation of mechanical properties. The water wall tube exhibited failure in the form of an elliptical puncture, with no significant thinning at the location of the puncture. The chemical composition, mechanical properties, and microstructure of the failed water wall tube were in accordance with the specified standards for SA 210 grade C steel. The microstructure of the tube consisted of a ferrite–pearlite structure and showed no anomalies related to microstructure. The experimental results revealed that the tube failed due to sulfidation corrosion on its outer surface. This sulfidation reaction was initiated by sulfur from pyrite (FeS2) in the coal-ash deposits on the outer surface. Moreover, the buildup of ash deposits caused localized overheating, which accelerated the sulfidation reaction, followed by an oxidation reaction.
Similar content being viewed by others
References
F. Gabrielli, An overview of water related tube failures in industrial boilers. Mat. Perf. 27(6), 51 (1988)
B.-S. Kim, J.-C. Chang, Y.-K. Jung, J.-J. Jung, Failure analysis of the superheater tubes of S-combined power plant. Eng. Fail. Anal. 17(4), 864–872 (2010)
M.M. Rahman, J. Purbolaksono, J. Ahmad, Root cause failure analysis of a division wall superheater tube of a coal-fired power station. Eng. Fail. Anal. 17(6), 1490–1494 (2010)
A. Saha, H. Roy, A.K. Shukla, Investigation into the probable cause of failure of economizer tube of a thermal power plant. J Fail. Anal. Prevent. 10, 187–190 (2010)
J. Ahmad, J. Purbolaksono, Hydrogen damage in a rear riser water wall tube of a power plant. Eng. Fail. Anal. 17(5), 1239–1245 (2010)
S.K. Dhua, Metallurgical investigation of failed boiler water-wall tubes received from a thermal power station. Eng. Fail. Anal. 17(7–8), 1572–1579 (2010)
J. Purbolaksono, J. Ahmad, L.C. Beng, A.Z. Rashid, A. Khinani, A.A. Ali, Failure analysis on a primary superheater tube of a power plant. Eng. Fail. Anal. 17, 158–167 (2010)
J. Ahmad et al., Failure investigation on rear water wall tube of boiler. Eng. Fail. Anal. 16, 2325–2332 (2009)
P. Munda et al., Failure investigation of boiler water wall tubes of a thermal power station. J. Fail. Anal. Prev. 16, 9–18 (2016)
S.C. Srivastava, K.M. Godiwalla, Review: Fuel ash corrosion of boiler and superheater tubes. J. Mater. Sci. 32, 835–849 (1997)
S. Chaudhuri and S.R. Singh, In: Proceeding: COFA-1997, pp.107–120.
A.S. Khanna, National workshop on boiler corrosion, 1995, CSIR-NML, Jamshedpur.
K. Natesan, High temperature corrosion in power-generating system, report Argonne National Laboratory.
V. Chawla, A. Chawla, D. Puri, S. Prakash, P.G. Gurbuxani, B.S. Sidhu, Hot corrosion & erosion problems in coal based power plants in India and possible solutions–a review. J. Miner. Mater. Charact. Eng. 10(04), 367 (2011)
P. Munda et al., Coal-ash corrosion failure of a boiler burner corner tube made of carbon steel. J. Fail. Anal. Prev. 23, 1393–1401 (2023)
ASM Hand book, Failure analysis and prevention, vol 11 (AMS International Materials Park, 2002), p.156–191
B.L. MacDonald, D. Stalla, X. He et al., Hunter-gatherers harvested and heated microbial biogenic iron oxides to produce rock art pigment. Sci. Rep. 9, 17070 (2019)
R.M. Cornell, U. Schwartzman, The iron oxides: structure, properties, reactions occurrences and uses. (Wiley-VCH, 2003)
S.E. Offerman et al., Ferrite/pearlite band formation in hot rolled medium carbon steel. Mater. Sci. Technol. 18, 297–303 (2002)
Y.L. Tian, R.W. Kraft, Mechanisms of pearlite spheroidization. Metall. Trans. A. 18(8), 1403–1414 (1987)
Q.-H. Zhao et al. Pearlite Spheroidization mechanism and lifetime prediction of 12Cr1MoV steel used in power plant. In: 4th Annual International Conference on Material Science and Engineering (ICMSE 2016), pp.195–201.
W.T. Reid, External corrosion and deposits. (American Elsevier, New York, 1971)
Acknowledgment
Authors are thankful to the Director, CSIR-National Metallurgical Laboratory for his kind motivation and permission to publish this research work.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Munda, P., Husain, M.M., Singh, C.V. et al. Sulfidation Corrosion Failure of a Boiler Tube in a Fossil Fuel-Based Thermal Power Plant. J Fail. Anal. and Preven. (2024). https://doi.org/10.1007/s11668-024-01914-w
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11668-024-01914-w