Abstract
A 20 ton polar crane motor fell during a 3400 kg (7500 lb) lift, narrowly missing personnel working beneath the crane. Witnesses reported that the motor fall was preceded by a falling oil mass, and it was believed that the motor was intact prior to impact. The maintenance history of the crane showed that the motor had been removed, repaired, and reinstalled 2 years prior to the failure. Observations of oil leakage were noted yearly up to the failure. The motor casing was held onto the adapter plate by eight 1/4-20 UNC × 25 mm (1 in.) long hex socket cap screws. Examination of the motor adapter plate, motor casing shards (aluminum), the gear side of the motor housing, and seven fractured cap screws (ASTM A574) showed that the motor casing was intact at the time of “uncontrolled descent” and that the screws had failed by high nominal stress reverse bending load fatigue, which was probably the result of insufficient torque on the bolts.
Similar content being viewed by others
Acknowledgments
This work was performed under the auspices of the U.S. Department of Energy.
Author information
Authors and Affiliations
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This article is adapted from Handbook of Case Histories in Failure Analysis, Vol 1, Khlefa A. Esaklul, Ed., ASM International, 1992, p 308–312, https://doi.org/10.31399/asm.fach.v01.c9001095.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Czajkowski, C.J. Failure of a 20 Ton Polar Crane Motor by Bolt Fatigue. J Fail. Anal. and Preven. 22, 2030–2036 (2022). https://doi.org/10.1007/s11668-022-01508-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11668-022-01508-4