References
R.M. Guedes, Creep and fatigue in polymer matrix composites- a volume in woodhead publishing series in composites science and engineering, 2nd edn (2019). https://doi.org/10.1016/C2017-0-02292-9
S. Budhe, M.D. Banea, S. de Barros, Prediction of failure pressure for defective pipelines reinforced with composite system, accounting for pipe extremities. J. Fail. Anal. Prev. 19, 1832–1843 (2019). https://doi.org/10.1007/s11668-019-00782-z
Dongliang Wang, Binbin Liao, Zhengli Hua, Gu Chaohua, Xu Ping, Experimental analysis on residual performance of used 70 Mpa type IV composite pressure vessels. J. Fail. Anal. Prev. 19, 204–211 (2019)
A. Ghouaoula, A. Hocine, D. Chapelle, F. Karaachira, M.L. Boubakar, Analytical prediction of damage in the composite part of a type-3 hydrogen storage vessel. Mech. Compos. Mater. 48(1), 77–88 (2012). https://doi.org/10.1007/s11029-012-9253-y
P.Y. Tabakov, E.B. Summers, Lay-up optimization of multilayered anisotropic cylinders based on a 3-D elasticity solution. Comput. Struct. 84(5), 374–384 (2006). https://doi.org/10.1016/j.compstruc.2005.09.023
J.Y. Kim, R. Hennig, V.T. Huett, P.C. Gibbons, K.F. Kelton, Hydrogen absorption in Ti–Zr–Ni quasicrystals and 1/1 approximants. J. Alloys Compd. Vol. 404–406, 388–391 (2005). https://doi.org/10.1016/j.jallcom.2005.02.089
X.-K. Sun, S.-Y. Du, G.-D. Wang, Bursting problem of filament wound composite pressure vessels. Int. J. Press. Vessels Pip. 76(1), 55–59 (1999). https://doi.org/10.1016/S0308-0161(98)00096-9
A. Hocine, A. Ghouaoula, F.K. Achira, S.M. Medjdoub, Analysis of failure pressures of composite cylinders with a polymer liner of type IV CNG vessels. Int. J. Mech. Aerosp. Ind. Mechatron. Eng. 7, 148–152 (2013)
A. Hocine, A. Maizia, A. Ghouaoula, H. Dehmous, Reliability prediction of composite tubular structure under mechanical loading by finite element method. J. Fail. Anal. Prev. 18(6), 1439–1446 (2018). https://doi.org/10.1007/s11668-018-0536-z
D. Perreux, E. Joseph, The effect of frequency on the fatigue performance of filament-wound pipes under biaxial loading: experimental results and damage model. Compos. Sci. Technol. 57(3), 353–364 (1997). https://doi.org/10.1016/S0266-3538(96)00155-8
D. Perreux, F. Thiebaud, Damaged elasto-plastic behaviour of [+ θ, − θ] fibre-reinforced composite laminates in biaxial loading. Compos. Sci. Technol. 54(3), 275–285 (1995). https://doi.org/10.1016/0266-3538(95)00065-8
J.L. Chermant, G. Boitier, S. Darzens, G. Farizy, J. Vicens, J.C. Sangleboeuf, The creep mechanism of ceramic matrix composites at low temperature and stress, by a material science approach. J. Eur. Ceram. Soc. 22, 2443–2460 (2002). https://doi.org/10.1016/S0955-2219(02)00103-6
A. Ghouaoula, A. Hocine, D. Chapelle, M.L. Boubakar, M. Hadj Meliani, Analytical prediction of behaviour of damaged composite tubular structures under quasi-static pressure. Struct. J. Integr. Life. 18(2), 143–148 (2018)
P. Treasurer, Durability of Tubular Composite Structures: Fatigue Time Dependent Damage Modelling. PhD Thesis, IFPEN Report (2010)
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Hocine, A., Maizia, A., Ghouaoula, A. et al. Deterministic Analysis for Creep Behavior of Damaged Composite Tubular Structure. J Fail. Anal. and Preven. 20, 1858–1863 (2020). https://doi.org/10.1007/s11668-020-00994-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11668-020-00994-8