Abstract
In this paper, friction stir welding process of high-density polyethylene was studied. Two tools have been chosen, concave and plate, to explore the influence of the tool on the welding quality of the material. In addition, different parameters, rotational speed and welding speed, were investigated. Tensile tests were performed after welding in order to determine the tensile strength efficiency. The greatest ultimate tensile strength was found for the plates welded by concave shoulder.
Similar content being viewed by others
References
W.M. Thomas, E.D. Nicholas, J.C. Need ham, M.G. Murch, P. Templesmith, C.J. Dawes, Friction stir butt welding. International patent application no. PCT/GB92/02203 and GB patent application no. 9125978.8, 6 December 1991
R.S. Mishra, Z.Y. Ma, Friction stir welding and processing. Mater. Sci. Eng. R 50, 1–78 (2005)
M. Kaid, M. Zemri, A. Brahami, S. Zahaf, Effect of friction stir welding (FSW) parameters on the peak temperature and the residual stresses of aluminum alloy 6061-T6: numerical modelisation. Int. J. Interact. Des. Manuf. 13, 797–807 (2019). https://doi.org/10.1007/s12008-019-00541-2
F. Al-Badour, M. Nesar, S. Abdelrahman, A. Bazoune, Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes. J. Mater. Proc. Technol. 213, 1433 (2013)
S.K. Sahu, D. Mishra, R.P. Mahto, V.M. Sharma, S.K. Pal, K. Pal, S. Banerjee, P. Dash, Friction stir welding of polypropylene sheet. Eng. Sci. Technol. Int. J. 21(2), 245–254 (2018)
P. Kah, R. Suoranta, J. Martikainen, C. Magnus, Techniques for joining dissimilar materials: metals and polymers. Rev. Adv. Mater. Sci. 36, 152–164 (2014)
A. Whelan, Polymer Technology Dictionary (Springer, Berlin, 2012)
A. Yousefpour, M. Hojjati, J.-P. Immarigeon, Fusion bonding/welding of thermoplastic composites. J. Thermoplast. Compos. Mater. 17, 303–341 (2004)
S.T. Amancio-Filho, J.F. dos Santos, Joining of polymers and polymer–metal hybrid structures: recent developments and trends. Polym. Eng. Sci. 49, 1461–1476 (2009)
D. Grewell, A. Benatar, Welding of plastics: fundamentals and new developments. Int. Polym. Proc. 22(1), 43–60 (2007)
M.F. Butler, A.M. Donald, Deformation of spherulitic polyethylene thin film. J. Mater. Sci 32, 3675–3685 (1997)
M.F. Butler, A.M. Donald, A.J. Ryan, Time resolved simultaneous smallandwide-angle X-ray scattering during polyethylene deformation-II. Cold drawing of linear polyethylene. Polymer 1(39), 39–52 (1998)
M. Aboulfaraj, C. G’sell, B. Ulrich, A. Dahoun, In situ observation of plastic deformation of polypropylene spherulites under uniaxial tension and simple shear in the scanning electron microscope. Polymer 36, 731–742 (1995)
A. Belaziz, M. Mohamed, Experimental study of the weld bead zones of a high-density polyethylene pipe (HDPE). J. Fail. Anal. Prev. 18(3), 667–676 (2018)
ASTM D638, Standard test method for tensile properties of plastics. Part IIB. Plastics (I) 8(1), 1–15 (2003)
A. Bagheri, T. Azdast, A. Doniavi, An experimental study on mechanical properties of friction stir welded ABS sheets. Mater. Des. 43, 402–409 (2013)
N. Mendes, A. Loureiro, C. Martins, P. Neto, J.N. Pires, Effect of friction stir welding parameters on morphology and strength of acrylonitrile butadiene styrene plate welds. Mater. Des. 58, 457–464 (2014)
V. Jaiganesh, B. Maruthu, E. Gopinath, Optimization of process parameters on friction stir welding of high density polypropylene plate. Procedia Eng. 97, 1957–1965 (2014)
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Mustapha, K., Abdessamad, B., Azzeddine, B. et al. Experimental Investigation of Friction Stir Welding Process on High-Density Polyethylene. J Fail. Anal. and Preven. 20, 590–596 (2020). https://doi.org/10.1007/s11668-020-00867-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11668-020-00867-0