Abstract
Wire rope is an important part of any crane. Failure of wire rope may lead to major loss in terms of life and cost. Wire rope failures are attributed by many aspects like operational, manufacturing, environmental, etc. Common type of failure mode is fatigue. There is a requirement of theoretical calculation of fatigue life of a wire rope, so that it can be changed before failures. Present case study shows a failure case of wire rope which is used in slab yard of steel plant. In this case study, wire rope failed prematurely within sixth month of service. The investigation consists of visual inspection, chemical analysis, characterization of microstructures using optical microscopes and hardness test. Present study also considers rope design aspect, effect of lubrication, rope construction factor with bending fatigue life cycle assessment of wire rope. Analysis suggests that the rope failed and damaged with guard of sheave indicating fouling of rope. Appearance of damage marks on guard indicates off-centered rope which can occur due to operational issue.
Similar content being viewed by others
References
Development of life Prolongation Technology for Crane Wire Rope; KAWASAKI STEEL Technical Report No. 45, Nov 2011
Usha Martine: Wire Rope Hand Book
U S Navy Wire Rope Handbook Vol-II on Wire Rope Analysis and Design Data, Oct 1987
Casar Special Wire Ropes; Calculating the Service Life of Running Steel Wire Ropes by Dipl-Ing. Roland Verreet
Casar Special Wire Ropes; Wire Rope Forensics by Dipl-Ing. Roland Verreet and Dr. Isabel Ridge
Indian Standard; IS: 4137:2015; Heavy Duty Electric Overhead Travelling Cranes Including Special Service Machines for Use in Steel Work—Code of Practice
Wire Rope Technical Manual of CIMAF. Apr 2013
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Palit, P., Kushwaha, S.K., Mathur, J. et al. Life Cycle Assessment of Wire Rope Used in Crane Application in a Steel Plant. J Fail. Anal. and Preven. 19, 752–760 (2019). https://doi.org/10.1007/s11668-019-00655-5
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11668-019-00655-5