Advertisement

Journal of Failure Analysis and Prevention

, Volume 18, Issue 1, pp 153–161 | Cite as

Alkaline Carbonate SCC Failures at a Refinery

  • Ryan J. Haase
  • Larry D. Hanke
Technical Article---Peer-Reviewed
  • 83 Downloads

Abstract

A metallurgical evaluation was performed to investigate two failures from carbonate-containing sour water service at a refinery. The failure mechanism for both fractured components (a pipe and a heat exchanger tube) was alkaline carbonate stress corrosion cracking. Alkaline carbonate stress corrosion cracking is a mechanism that has become more widely recognized in refinery service. This paper details the visual, SEM/EDS, metallographic, and microhardness evaluations used to determine the failure mechanism for each refinery component.

Keywords

Alkaline carbonate stress corrosion cracking Stress corrosion cracking Carbonate Petroleum Refining 

Notes

Acknowledgments

The authors would like to thank Stephen Davis, who was one of the principal investigators for the evaluation of the heat exchanger tube.

References

  1. 1.
    Review and Survey of Alkaline Carbonate Stress Corrosion Cracking in Refinery Sour Waters. NACE International Publication 34108. p 2, 5–6, 13, and 20Google Scholar
  2. 2.
    Nalco Company, Stress Corrosion Cracking. The Nalco Guide to Boiler Failure Analysis (McGraw Hill, London, 2011), p 281Google Scholar
  3. 3.
    R.D. Kane, Corrosion in petroleum refining and petrochemical operations, in Corrosion: Environments and Industries, vol 13C, ASM Handbook (ASM International, 2006), p. 317Google Scholar
  4. 4.
    Standard Material Requirements: Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments. NACE Standard MR0103-2012, p 7–8Google Scholar
  5. 5.
    W.R. Warke, Stress-corrosion cracking, in Failure Analysis and Prevention, vol 11, ASM Handbook (ASM International, 2002), p. 839Google Scholar
  6. 6.
    Damage Mechanisms Affecting Fixed Equipment in the Refining Industry. API Recommended Practice 571, 2nd edn. (2011), p. 5–60 and 5–72Google Scholar

Copyright information

© ASM International 2018

Authors and Affiliations

  1. 1.Materials Evaluation and EngineeringPlymouthUSA

Personalised recommendations