Advertisement

Journal of Failure Analysis and Prevention

, Volume 16, Issue 6, pp 941–950 | Cite as

Use of a Ring DWTT Specimen for Determination of Steel NDT from Pipe of Diameter Less than DN500

  • M. Ben Amara
  • J. Capelle
  • Z. Azari
  • G. Pluvinage
Tools and Techniques

Abstract

It has become recognized that the drop weight tearing test (DWTT) energy better represents the ductile fracture resistance of pipe steels since it utilizes a specimen that has the full thickness of the pipe and has a fracture path long enough to reach steady-state fracture resistance. However, the API 5L code does not require it for pipe sizes less than DN500. The aim of this paper is to propose a DWTT specific to small diameter pipes based on a new specimen, the ring drop weight tearing test (RDWTT) specimen; to evaluate the transition temperature T t, DWTT and nil ductility temperature of the pipe steel API 5L X65; to introduce the transition temperature T t, DWTT in the transition temperature material master curve of the API 5L X65 steel; and to compare the prediction of the crack ductile extension in a pipe based on the RDWTT’s energy and crack tip opening angle in the case of the steel API 5L X65.

Keywords

Ring specimen NDT Constraint Crack extension 

References

  1. 1.
    API RP 5L3 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe. American Petroleum Institute, Washington (1996).Google Scholar
  2. 2.
    API 579-1 ASME FFS-1 June 5 (2007).Google Scholar
  3. 3.
    Z. Yang, The fracture during drop-weight tear test of high performance pipeline steel and its abnormal fracture appearance. Proced. Mater. Sci. 3, 1591–1598 (2014)CrossRefGoogle Scholar
  4. 4.
    G.M. Wilkowski, W.A. Maxey, R.J. Eiber, Use of DWTT energy for predicting ductile fracture behavior in controlled rolled steel line pipes. Can. Metall. Q. 19, 59–77 (1980)CrossRefGoogle Scholar
  5. 5.
    S. Xu, W.R. Tyson, CTOA measurement of pipe steels using DWTT specimen, in Proceedings of the 7th International Pipeline Conference (IPC 2008), Calgary, AB, Canada: ASME; Sept. 29–Oct 3, Paper IPC 2008-64060, (2008).Google Scholar
  6. 6.
    Y. Wu, L. Fletcher, A Cautionary Tale on Propagating Brittle Fracture in Pipelines. Pipelines International, pp. 51–53 (2013).Google Scholar
  7. 7.
    N. Pussegoda, L. Malik, A. Dinovitzer, B.A. Graville, A.B. Rothwell, An interim approach to determine dynamic ductile fracture resistance of modern high toughness pipeline steels, in Proceedings of the 2000 International Pipeline Conference, ed. by J.R. Ellwood, vol 1. (The American Society of Mechanical Engineeers, New York 2000), pp. 239–45.Google Scholar
  8. 8.
    A. Coseru, J. Capelle, G. Pluvinage, On the use of Charpy transition temperature as reference temperature for the choice of a pipe steel. Eng. Fail. Anal. 37, 110–119 (2014)CrossRefGoogle Scholar
  9. 9.
    M. Mouwakeh, G. Pluvinage, S. Masri, Failure of water pipes containing surface cracks using limit analysis notions. Res. J Aleppo Univ. Eng. Sci. Ser. 63, 79 (2011)Google Scholar
  10. 10.
    B.S. Henry, A.R. Luxmore, The stress triaxiality constraint and the Q-value as a ductile fracture parameter. Eng. Fract. Mech. 57, 375–390 (1997)CrossRefGoogle Scholar
  11. 11.
    C. Ruggieri, X. Gao, R. Dodds, H “Transferability of elastic–plastic fracture toughness using the Weibull stress approach: Significance of parameter calibration”. Eng. Fract. Mech. 67, 101–117 (2000)CrossRefGoogle Scholar
  12. 12.
    M.H. Meliani, Y.G. Matvienko, G. Pluvinage, Two-parameter fracture criterion (K ρ, χ-T ef, c) based on notch fracture mechanics. Int. J. Fract. 167(2), 173–182 (2011)CrossRefGoogle Scholar
  13. 13.
    G.P. Nikishkov, An algorithm and a computer program for the three-term asymptotic expansion of elastic-plastic crack tip stress and displacement fields. Eng. Fract. Mech. 50(1), 65–83 (1995)CrossRefGoogle Scholar
  14. 14.
    S.G. Larsson, A. Carlsson, Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materials. J. Mech. Phys. Solids 21(4), 263–277 (1973)CrossRefGoogle Scholar
  15. 15.
    G. Pluvinage, Notch Effects in Fatigue and Fracture (Kluwer, Dordrecht, 2001)CrossRefGoogle Scholar
  16. 16.
    B. Yang, K. Ravi-Chandar, Evaluation of elastic T-stress by the stress difference method. Eng. Fract. Mech. 64(5), 589–605 (2001)CrossRefGoogle Scholar
  17. 17.
    K. Wallin, Structural integrity assessment aspects of the Master Curve methodology. Eng. Fract. Mech. 77(2), 285–292 (2010)CrossRefGoogle Scholar
  18. 18.
    W.A. Maxey, in 5th Symposium on Line Pipe Research, PRCI Catalog No. L30174, Paper J, (1974).Google Scholar
  19. 19.
    E. Sugie, M. Matsuoka, T. Akiyama, H. Mimura, Y. Kawaguchi, A study of shear crack propagation in gas-pressurized pipelines. J. Press. Vessel Technol. 104(4), 338–343 (1982)CrossRefGoogle Scholar
  20. 20.
    R. Higuchi, H. Makino, I. Takeuchi, New concept and test method on running ductile fracture arrest for high pressure gas pipeline, in 24th World Gas Conference, WGC 2009, vol 4 (International Gas Union, Buenos Aires, Argentina, 2009), pp. 2730–2737.Google Scholar
  21. 21.
    G. Demofonti, G. Mannucci, H.G. Hillenbrand, D. Harris, Suitability evaluation of X100 steel pipes for high pressure gas transportation pipelines by full scale tests, in 14th Joint Technical Meeting on Pipeline Research. EPRG-PRCI-APIA (2003).Google Scholar
  22. 22.
    M. Ben Amara, G. Pluvinage, J. Capelle, Z. Azari, Crack tip opening angle as a fracture resistance parameter to describe ductile crack extension and arrest in steel pipes under service pressure. Phys. Mesomech. 18(4), 355–369 (2015)CrossRefGoogle Scholar
  23. 23.
    I. Scheider, M. Schödel, W. Brocks, W. Schönfeld, Crack propagation analyses with CTOA and cohesive model: comparison and experimental validation. Eng. Fract. Mech. 73(2), 252–263 (2006)CrossRefGoogle Scholar

Copyright information

© ASM International 2016

Authors and Affiliations

  • M. Ben Amara
    • 1
  • J. Capelle
    • 1
  • Z. Azari
    • 1
  • G. Pluvinage
    • 2
  1. 1.ENIMMetzFrance
  2. 2.FM.CSilly sur NiedFrance

Personalised recommendations