Advertisement

Journal of Failure Analysis and Prevention

, Volume 15, Issue 3, pp 390–400 | Cite as

Progressive Failure Analysis of Laminated Composite Cylindrical Shell Roofs

  • Jayashree Sengupta
  • Arghya Ghosh
  • Dipankar Chakravorty
Technical Article---Peer-Reviewed

Abstract

A progressive failure analysis of laminated composite cylindrical roofs under transverse uniformly distributed static loadings has been carried out in the present paper using the finite element method. In the finite element analysis, an eight-noded isoparametric shell elements are taken up. The first-ply failure load and the ultimate ply failure load are evaluated and compared using different stress-based failure criteria. The effect of orientation of fibers in a lamina, stacking sequence, and varying boundary conditions, on the strength of the laminate is carried out. Factors of safety and load factors are suggested based on the values of first and ultimate ply failure loads. The damage progression using the failure criterion corresponding to the first-ply failure load has been shown. The areas of damage are correlated with deflection values through explicit equations so as to get an idea about the damage extents without going into elaborate testing. The results are interpreted from practical engineering standpoint to extract meaningful conclusions.

Keywords

Progressive failures Finite element method First-ply failure Ultimate ply failure 

Notations

a, b

Length and width of shell in plan

D

Flexural rigidity matrix of the laminate

{d}

Global displacement vector

E11, E22

Young’s moduli of a lamina along and transverse to the fibers, respectively

G12, G13, G23

Shear modulus of a lamina in 1–2, 1–3, and 2–3 planes corresponding to the local axes of that lamina

h

Shell thickness

Mx,My

Moment resultants per unit length of cylindrical shell

Mxy

Torsion resultant per unit length of cylindrical shell

Ni

Shape functions for first to eight nodes of an element, respectively

Nx,Ny

In-plane normal force resultants per unit length in X- and Y-direction

Nxy

In-plane shear force resultant per unit length of shell

Qx,Qy

Transverse shear resultants per unit length of shell

q

Intensity of uniformly distributed load

u, v, w

Translational degrees of freedom along X-, Y- and Z-direction, respectively

w

Transverse displacement in cm

X, Y and Z

Global co-ordinates of the laminate

Zk, Zk−1

Top and bottom distance of the kth ply from mid-plane of a laminate

α, β

Rotational degrees of freedom about Y- and X-axis, respectively

\(\sigma_{x}\), \(\sigma_{y}\), \(\sigma_{z}\)

Normal stresses in X-, Y- and Z-direction, respectively

τxy,τyz,τxz,

Shear stress in XY-, YZ- and XZ -plane, respectively

εx,εy

Strain along X- and Y-direction, respectively

εxy

Shear strain

θ

Angle of lamination with respect to the X axis of the cylindrical shell

\(\nu_{\text{ij}}\)

Poisson’s ratio which characterizes compressive strain along x j-direction produced by a tensile strain applied in x i-direction

\(\varepsilon_{x}^{0} ,\varepsilon_{y}^{0} , \gamma_{xy}^{0} , \gamma_{xz}^{0} , \gamma_{yz}^{0}\)

In-plane and transverse strains of the mid-plane

\(\kappa_{x} , \kappa_{y} , \kappa_{xy} , \kappa_{xz} , \kappa_{yz}\)

Curvature of shell

FXT,FYT,FZT

Tensile strength in X-, Y- and Z-direction, respectively

FXC,FYC,FZC

Compressive strength in X-, Y- and Z-direction, respectively

\(F_{SXY}\), \(F_{SYZ} , F_{SXZ}\)

Shear strength in XY-, YZ- and XZ-plane, respectively

εXT,εXC

Allowable normal strain strengths of a lamina along the fiber direction in tension and compression, respectively

εYT,εYC

Allowable normal strain strengths of the matrix along the perpendicular to the fiber direction in tension and compression, respectively

\(\varepsilon_{{\text{S}}_{XY}},\,\varepsilon_{{\text{S}}_{YZ}},\, \varepsilon_{{\text{S}}_{XZ}},\)

Shear strain strengths of a lamina in 2–3, 1–3 and 1–2 planes, respectively

Notes

Acknowledgments

The second author gratefully acknowledges the financial assistance of Technical Education Quality Improvement Programme, Phase-II (A World Bank aided project of Govt. of India) of Serial No. 1893 of Jadavpur University, Kolkata-700032, India.

References

  1. 1.
    J.N. Reddy, Exact solutions of moderately thick laminated shells. J. Eng. Mech. 110(5), 794–809 (1984)CrossRefGoogle Scholar
  2. 2.
    T.Y. Kam, H.F. Sher, T.N. Chao, R.R. Chang, Predictions of deflection and first-ply failure load of thin laminated composite plates via the finite element approach. Int. J. Solid Struct. 33(3), 375–398 (1996)CrossRefGoogle Scholar
  3. 3.
    P. Pal, C. Ray, Progressive failure analysis of laminated composite plates by finite element method. J. Reinf. Plast. Compos. 21(16), 1505–1513 (2002)CrossRefGoogle Scholar
  4. 4.
    B. Gangadhara Prusty, Progressive failure analysis of laminated unstiffened and stiffened composite panels. J. Reinf. Plast. Compos. 24(6), 633–642 (2005)CrossRefGoogle Scholar
  5. 5.
    G. Akhras, W.C. Li, Progressive failure analysis of thick composite plates using the spline finite strip method. Compos. Struct. 79(1), 34–43 (2007)CrossRefGoogle Scholar
  6. 6.
    M. Cho, R.R. Parmerter, Efficient higher order composite plate theory for general lamination configurations. AIAA J. 31(7), 1299–1306 (1993)CrossRefGoogle Scholar
  7. 7.
    J.D. Lee, Three dimensional finite element analysis of damage accumulation in composite laminate. J. Comput. Struct. 15(3), 335–350 (1982)CrossRefGoogle Scholar
  8. 8.
    Vladislav Las, Robert Zemcík, Progressive damage of unidirectional composite panels. J. Compos. Mater. 42(1), 25–44 (2008)Google Scholar
  9. 9.
    A. Puck, H. Schürmann, Failure analysis of FRP laminates by means of physically based phenomenological models. Compos. Sci. Technol. 58(7), 1045–1067 (1998)CrossRefGoogle Scholar
  10. 10.
    R. Ganesan, D.Y. Liu, Progressive failure and post-buckling response of tapered composite plates under uni-axial compression. Compos. Struct. 82(2), 159–176 (2008)CrossRefGoogle Scholar
  11. 11.
    R. Ganesan, D. Zhang, Progressive failure analysis of composite laminates subjected to in-plane compressive and shear loadings. Sci. Eng. Compos. Mater. 11(2–3), 79–102 (2004)Google Scholar
  12. 12.
    S.B. Singh, A. Kumar, N.G.R. Iyengar, Progressive failure of symmetrically laminated plates under uni-axial compression. Struct. Eng. Mech. 5(4), 433–450 (1997)CrossRefGoogle Scholar
  13. 13.
    S.B. Singh, A. Kumar, N.G.R. Iyengar, Progressive failure of symmetric laminates under in-plane shear: I-positive shear. Struct. Eng. Mech. 6(2), 143–159 (1998)CrossRefGoogle Scholar
  14. 14.
    S.B. Singh, A. Kumar, N.G.R. Iyengar, Progressive failure of symmetric laminates under in-plane shear: II-Negative shear. Struct. Eng. Mech. 6(7), 757–772 (1998)CrossRefGoogle Scholar
  15. 15.
    A. Ahmed, L.J. Sluys, A computational model for prediction of progressive damage in laminated composites. ECCM15—15th European Conference on Composite Materials, Venice, Italy, 24–28 June 2012Google Scholar
  16. 16.
    T.P. Philippidis, A.E. Antoniou, A progressive damage FEA model for glass/epoxy shell structures. J. Compos. Mater. 47(5), 623–637 (2012)CrossRefGoogle Scholar
  17. 17.
    D. Cardenas, H. Elizalde, P. Marzocca, F. Abdi, L. Minnetyan, O. Probst, Progressive failure analysis of thin-walled composite structures. Compos. Struct. 95, 53–62 (2013)CrossRefGoogle Scholar
  18. 18.
    B. Ellul, D. Camilleri, C. Betts, A progressive failure analysis applied to fiber-reinforced composite plates subject to out-of- plane bending. J. Mech. Compos. Mater. 49(6), 605–620 (2014)CrossRefGoogle Scholar

Copyright information

© ASM International 2015

Authors and Affiliations

  • Jayashree Sengupta
    • 1
  • Arghya Ghosh
    • 1
  • Dipankar Chakravorty
    • 1
  1. 1.Department of Civil EngineeringJadavpur UniversityKolkataIndia

Personalised recommendations