Metallurgical Analysis Explains the Failure Mechanism of a Farm Tractor’s PTO + PTO’s Drive Shaft, Assisting in the Evaluation of Economical Consequences of Similar Events
- 150 Downloads
A farm tractor’s power take-off is a gearing system that converts the main power of the tractor’s machine to a rotating movement of a properly attached drive shaft. The shaft’s rotating action is very useful for the agricultural practice because it could be connected at its external end to numerous work equipments (vacuum systems, excavating devices, pumps, etc.) that function as the final step of the agricultural job. Numerous failures happened to both, the PTO and the shaft, are frequently referred. They could become very dangerous to the tractor’s users because they stop suddenly the work equipment. In this case study, we investigated a failure that happened to both, the PTO and the shaft. A failure mechanism is proposed with the aim to encourage farm tractor’s owners to ask for metallurgical investigation of the failure in evaluating the economical consequences of analog events on their property.
KeywordsPower take-off PTO Drive shaft Torsion overload Bending overload Failure
We express our thanks to Dr. Panagiotis K. Tsolakis of Materials Industrial Research & Technology Center—MIRTEC S.A. (Volos Industrial Area, Greece) for his kind contribution in performing the chemical analysis of the material with OES.
- 1.NASA, Monitoring Techniques for the X-29A Aircraft’s High-Speed Rotating Power Takeoff Shaft [pdf] (1990). Available at http://www.nasa.gov/centers/dryden/pdf/88209main_H-1680.pdf. Accessed 18 Sep 2014
- 2.National Safety Council, Power-Take-Off (PTO) Safety [pdf] (2009). Available at http://www.nsc.org/news_resources/Resources/Documents/Power_Take_Off%20%28PTO%29.pdf. Accessed 18 Sep 2014
- 3.L. Samuels, Light Microscopy of Carbon Steels (ASM International, Second Printing, Materials Park, 2003)Google Scholar
- 4.V. Kerlins, Modes of Fracture, Handbook, Fractography, vol. 12, vol. 12 (ASM International, Second Printing, Materials Park, 1992)Google Scholar
- 5.A.O. Bernscoter, Carbon and Alloy Steels, Handbook: Metallography and Microstructures, vol. 9 (ASM International, Sixth Printing, Materials Park, 1995)Google Scholar
- 6.J. Donald, D. Wulpi, J., Failures of Shafts, Handbook: Failure Analysis, vol. 11 (ASM International, Fifth Printing, Materials Park, 1995)Google Scholar
- 7.A.D. Wilson, Fatigue and Fracture and Fatigue Properties of Structural Steels, Handbook: Fatigue and Fracture, vol. 19 (ASM International, Second Printing, Materials Park, 1997)Google Scholar
- 8.D.P. Dennies, How to Organize and Run a Failure Investigation (ASM International, Second Printing, Materials Park, 2006)Google Scholar