Journal of Failure Analysis and Prevention

, Volume 13, Issue 5, pp 545–550 | Cite as

Failure of Silicon Bronze Impeller from Dealloying Via Desiliconification

  • Nicholas Bantz
Case History---Peer-Reviewed


A cast silicon bronze (UNS C86700) impeller that had been severely corroded was submitted for failure analysis. The customer had informed that this impeller was used to pump potable water, but the service length and chlorine content of the water were unknown. The impeller displayed a Cu-rich red phase on its surfaces and showed a pattern very similar to dezincification. Further investigation to determine the cause of damage using various techniques, including light microscopy, scanning electron microscopy combined with energy dispersive x-ray spectroscopy, revealed that the microstructure consisted of multiple phases and that a Si-rich phase was being preferentially attacked, leading to a porous structure. After a thorough examination, it was concluded that this part had failed due to dealloying via desiliconification.


Corrosion failure analysis Nonferrous metals Failure analysis Metallurgical investigation Casting Failure mechanism Brass 


  1. 1.
    R.W. Revie, Uhlig’s Corrosion Handbook, 3rd edn. (Wiley, New York, 2011), pp. 145–148CrossRefGoogle Scholar
  2. 2.
    Metallurgically Influenced Corrosion. ASM Handbook, vol 13, 9th edn. (ASM, Metals Park, 1990), pp. 131–133Google Scholar

Copyright information

© ASM International 2013

Authors and Affiliations

  1. 1.Metals Engineering & Testing Laboratories – EngineeringPhoenixUSA

Personalised recommendations