Advertisement

Journal of Failure Analysis and Prevention

, Volume 13, Issue 2, pp 202–206 | Cite as

Failure Analysis of a Copper Tube for Pneumatic System

  • L. S. Araujo
  • L. H. de Almeida
  • D. A. Pereira
Technical Article---Peer-Reviewed
  • 547 Downloads

Abstract

Deoxidized-high-phosphorous (DHP) copper tubes are widely and successfully used in different applications as: water distribution, air-conditioning, solar heating, fuel, oil, and natural gas services and compressed air systems. In the present analysis, a failure of a copper tube composing a pneumatic system of a subway train was investigated by means of on-site examination, metallographic and fracture analyses. Results show that arcs coming from an exposed power cable lead to partial melting of a section of the tube, resulting in loss of pressure and interruption of the train.

Keywords

Failure analysis Copper tube Pneumatic system 

References

  1. 1.
    Copper Development Association: The Copper Tube Handbook. Copper Development Association, New York (2010)Google Scholar
  2. 2.
    Pantazopoulos, G., Vazdirvanidis, A., Tsinopoulos, G.: Failure of a hard-drawn water tube leakage caused by the synergistic of pitting corrosion and stress-corrosion cracking. Eng. Fail. Anal. 18, 649–657 (2011)CrossRefGoogle Scholar
  3. 3.
    Stevenson, M., Barkey, M., McDougall, J.: Stress in bent copper tubing: application to fatigue and stress–corrosion cracking failure mechanisms. J. Fail. Anal. Prev. 6, 25–29 (2005)CrossRefGoogle Scholar
  4. 4.
    Seung-Hwan, L., Jung-Gu, K., Ja-Young, K.: Investigation of pitting corrosion of a copper tube in heating system. Eng. Fail. Anal. 17, 1424–1435 (2010)CrossRefGoogle Scholar
  5. 5.
    Fernandes, P.: Type I pitting of copper tubes from a water distribution system. Eng. Fail. Anal. 5, 35–40 (1998)CrossRefGoogle Scholar
  6. 6.
    Cano, E., Simancas, J., Polo, J., Torres, C., Bastidas, J., Alcolea, J.: Early corrosion failure of copper tubing used in air-conditioning units. Mater. Corros. 50, 103–110 (1999)CrossRefGoogle Scholar
  7. 7.
    ASTM International: ASTM B88–09. Standard Specification for Seamless Copper Water Tube. ASTM International, Pennsylvania (2009)Google Scholar
  8. 8.
    Gillman, T., Le May, I.: Mechanical and electrical failures reading to major fires. Eng. Fail. Anal. 14, 995–1018 (2007)CrossRefGoogle Scholar

Copyright information

© ASM International 2013

Authors and Affiliations

  • L. S. Araujo
    • 1
  • L. H. de Almeida
    • 1
  • D. A. Pereira
    • 2
  1. 1.PEMM/COPPE-Federal University of Rio de JaneiroRio de JaneiroBrazil
  2. 2.MetroRioRio de JaneiroBrazil

Personalised recommendations