Journal of Failure Analysis and Prevention

, Volume 11, Issue 5, pp 466–472 | Cite as

Accelerated Corrosion of a Boiler Chimney: Causes and Preventive Steps

Case History---Peer-Reviewed

Abstract

Heavy corrosion attack was observed on the SS 304 liner used on the upper part of a mild steel chimney stack in a boiler. The corrosion had taken place due to the condensation of acidic flue gases. The corrosion damage in the liner material was even higher at locations, where a ladder was attached to the chimney body. Heavy thinning of the mild steel chimney body at such locations had also taken place from the inside, i.e., the inner surface exposed to the flue gas atmosphere. The chemical analysis of the corrosion deposits and condensates confirmed the presence of highly acidic environment (pH 2) consisting of mostly sulfate ions. Remedial measures to prevent future occurrence of the problem are also addressed.

Keywords

Corrosion failure analysis Stainless steel Dew-point corrosion Condensation Chimney 

References

  1. 1.
    Huijbregts, W.M.M., Leferink, R.: Latest advances in the understanding of acid dewpoint corrosion: corrosion and stress corrosion cracking in combustion gas condensates. Anticorros. Methods Mater. 51, 173–188 (2004)CrossRefGoogle Scholar
  2. 2.
    Cox, W.M., Gearey, D., Wood, G.C.: Components susceptible to dew-point corrosion. In: Metals Handbook, vol. 13, Corrosion, 9th edn., pp. 1001–1006. ASM, Metals Park, OH (1987)Google Scholar
  3. 3.
    Metals Handbook, vol. 1, Properties and Selection: Irons, Steels and High-Performance Alloys, 10th edn., pp. 197–198, 871. ASM, Metals Park, OH (1990)Google Scholar
  4. 4.
    Kadry, S.: Corrosion analysis of stainless steel. Eur. J. Sci. Res. 22, 508–516 (2008)Google Scholar
  5. 5.
    Standard Practices for Detecting Susceptibility to Intergranular Corrosion in Austenitic Stainless Steels, A 262, Annual Book of ASTM Standards. ASTM, Philadelphia, PA (2005)Google Scholar
  6. 6.
    Brubaker, S.K.: Corrosion by sulphuric acid. In: Metals Handbook, vol. 13, Corrosion, 9th edn., pp. 1148–1154. ASM, Metals Park, OH (1987)Google Scholar
  7. 7.
    Fontana, M.G.: Corrosion Engineering, 3rd edn., pp. 317–336. McGraw-Hill Book Company, Singapore (1987)Google Scholar

Copyright information

© ASM International 2011

Authors and Affiliations

  1. 1.Materials Science DivisionBhabha Atomic Research CentreTrombayIndia

Personalised recommendations