Journal of Failure Analysis and Prevention

, Volume 10, Issue 5, pp 351–357 | Cite as

Failures Induced by Abnormal Banding in Steels

Feature

Abstract

In industrial applications failures of mechanical parts made of carbon and alloyed steels may develop either during heat treatment steps or final finishing operations. Such failures have high impact costs for manufacturers, since heat treated steel products, in general, are high value products which increase in value with each step in the production process until the final life-cycle manufacturing steps are completed. This work highlights the selection of steels to avoid premature ruptures developing during either the heat treatment steps or finishing operations with emphasis on the role of banding in the failure process. Failure does not have to involve fracture but may simply imply a decrease in performance of surface treated components as consequence of surface properties, even in the presence of correct heat treatment parameters. The root causes for banding in steels, are described in literature, and banding has major effects on final product properties (and causal relationships). Therefore, the causes of banding are studied and classified. Conclusions suggest that microstructural defects such as (micro)segregation bands and other defects such as slag and oxides inclusions are developed in the early fabricating cycle steps and can cause premature failure of either semi-finished or finished products.

Keywords

Segregation Heat treatments Toughness Banding Anisotropy Martensite Transformation plasticity Failure Austenite 

References

  1. 1.
    Howe, H.M.: The Metallography of Steel and Cast Iron, pp. 556–565. McGraw-Hill, New York, NY (1916)Google Scholar
  2. 2.
    Cameron, A.E., Waterhouse, G.B.: The influence of arsenic on steel. J. Iron Steel Inst. 113, 355–374 (1926)Google Scholar
  3. 3.
    Whiteley, J.H.: Apparent relations between manganese and segregation in steel ingots. J. Iron Steel Inst. 144(2), 63–77 (1941)Google Scholar
  4. 4.
    Bastien, P.G.: The mechanism of formation of banded structures. J. Iron Steel Inst. 193, 281–290 (1957)Google Scholar
  5. 5.
    Samuels, L.E.: Optical Microscopy of Carbon Steels, pp. 127–135. ASM, Metals Park, OH (1980)Google Scholar
  6. 6.
    Stead, J.E.: Some of the ternary alloys of iron carbon and phosphorus. J. Soc. Chem. Ind. 33(4), 173–184 (1914)CrossRefGoogle Scholar
  7. 7.
    Thompson, S.W., Howell, P.R.: Factors influencing ferrite/pearlite banding and origin of large pearlite nodules in a hypoeutectoid plate steel. Mater. Sci. Technol. 8, 777–784 (1992)Google Scholar
  8. 8.
    Krauss, G.: Solidification, segregation, and banding in carbon and alloy steels. Metall. Mater. Trans. B 34B, 781–792 (2003)CrossRefADSGoogle Scholar
  9. 9.
    Thompson, S.W., Howell, P.R.: Factors influencing ferrite/pearlite banding and origin of large pearlite nodules in a hypoeutectoid plate steel. Mater. Sci. Technol. 8, 777–784 (1992)Google Scholar
  10. 10.
    Stead, J.E.: Iron and phosphorus. J. Iron Steel Inst. II, 60-155 (1900)Google Scholar
  11. 11.
    Jatczak, C.F., Girardi, D.J., Rowland, E.S.: On banding in steel. Trans. ASM 48, 279–305 (1956)Google Scholar
  12. 12.
    Kirkaldy, J.S., von Destinon-Forstmann, J., Brigham, R.J.: Simulation of banding in steel. Can. Metall. Q. 1, 59–81 (1962)Google Scholar
  13. 13.
    Eckert, J.A., Howell, P.R., Thompson, S.W.: Banding and the nature of large, irregular pearlite nodules in a hot-rolled low-alloy plate steel: a second report. J. Mater. Sci 28, 4412–4420 (1993)CrossRefADSGoogle Scholar
  14. 14.
    Grossterlinden, R., Kawalla, R., Lotter, U., Pircher, H.: Formation of pearlitic banded structures in ferritic-pearlitic steels. Steel Res. 63, 331–336 (1992)Google Scholar
  15. 15.
    Heiser, F.A., Hertzberg, R.W.: Structural control and racture anisotropy of banded steel. J. Iron Steel Inst. 209, 975–980 (1971)Google Scholar
  16. 16.
    Grange, R.A.: Effect of microstructural banding in steel. Metall. Trans. 2, 417–426 (1971)CrossRefGoogle Scholar
  17. 17.
    Hellner, L., Norrman, T.O.: Banding in alloyed steels. Jernkont. Ann. 152, 269–286 (1968)Google Scholar
  18. 18.
    Kennedy, R., Grant A. I., Kinnear, A.J., Kirkpatrick, I.M.: Dimensional changes in steels due to thermal cycling. J. Iron Steel Inst. 601–602 (1970)Google Scholar
  19. 19.
    Goldberg, A.: Trans. ASM 61, 26–36 (1968)Google Scholar
  20. 20.
    Farooque, M., Qaisar, S., Haq, A.U.L., Khan, A.Q.: Dimensional anisotropy in 18 Pct. Ni maraging steel. Met. Mater. Trans. 32A, 1057–1061 (2001)CrossRefGoogle Scholar
  21. 21.
    Jaramillo, R.A., Lusk, M.T., Mataya, M.C.: Dimensional anisotropy during phase transformations in a chemically banded 5140 steel; part II: modeling. Acta Mater. 52, 859–867 (2004)CrossRefGoogle Scholar

Copyright information

© ASM International 2010

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringPolitecnico di MilanoMilanItaly

Personalised recommendations