Ultrasonic Cleaning-Induced Failures in Medical Devices
- 212 Downloads
Ultrasonic cleaning is often used as part of the manufacturing process of small medical devices such as guide wires and vascular implants. Ultrasonic cleaning at frequencies close to the natural frequency of the device can result in resonance, resulting in significant mechanical damage and possibly premature failure. This paper provides case studies of ultrasonic cleaning-induced fatigue and corresponding failures in small medical devices. Preventative measures, including analytical tools such as finite element analysis (FEA), to ensure that ultrasonic cleaning frequencies do not result in resonance and stresses sufficient to cause fatigue damage are also discussed.
KeywordsBiomaterials Fatigue failure Ultrasonic Medical device
- 1.Mallette, L.A., Chen, I., Johnson, T.W.: A case study in ultrasonic cleaning damage. IEEE Aerospace Conf. 3(21–28), 77–80 (1998)Google Scholar
- 2.Yuqi, J., Dong, T., Xianzhong, S., Fai, L.: The effect of ultrasonic cleaning on the bond wires, Proceedings of the 12th IPFA, 2005, Singapore, IEEE, pp. 237–241Google Scholar
- 4.Timoshenko, S., Young, D.H., Weaver, W.: Vibration Problems in Engineering, 4th edn. Wiley, New York (1974)Google Scholar
- 5.Handbook of Silicon Wafer Cleaning Technology, 2nd edn. In: Reinhardt, K.A., Kern, W. (eds.). William Andrews Publishing (2008)Google Scholar