Failure Analysis and Remaining Life Assessment of Methanol Reformer Tubes

  • G. Quickel
  • C. Jaske
  • B. Rollins
  • J. Beavers
Case History---Peer-Reviewed


High-quality failure analysis and good engineering judgment can turn plant shutdowns resulting from methanol reformer tube failures into an opportunity to improve the future performance of the reformer furnace. The plant down time can be used to evaluate remaining tube life and provide some insight into the effect of tube operating history, especially tube metal temperature on tube performance. The results can be used to minimize potential future failures and economic losses because of reformer shutdowns. In this article, the failure mechanism of a ruptured reformer tube is determined and an assessment of the remaining life of non-ruptured tubes in the reformer is discussed. Two assessment methods are reviewed (1) metallographic examination of ex-service material to characterize microstructure and creep damage and (2) modeling of creep damage accumulation using special-purpose finite-element software (WinTUBETM).


Reformer Methanol Failure Creep Remaining 


  1. 1.
    Jaske, C.E.: Issues in the Life Assessment of Reformer Tubes, Paper 05419, CORROSION/2005. NACE International, Houston (2005)Google Scholar
  2. 2.
    Dillenger, L., Roach, D.: Metallurgy and Metallography of Reformer Alloys. Report to Materials for Steam Reformer Furnaces Group, Battelle, Columbus, Ohio, May 1, 1975Google Scholar
  3. 3.
    Hasselbächer, E.B., Gawenda, P., Schorr, M., Schütze, M., Hoffman, J.J.: Atlas of Microstructures. Materials Technology Institute, St. Louis, MO, USA (2008)Google Scholar
  4. 4.
    Jaske, C.E., Simonen, F.A., Roach, D.B.: Predict reformer furnace tube life. Hydrocarbon Process. 62, 63–66 (1983)Google Scholar
  5. 5.
    Simonen, F.A., Jaske, C.E.: A computational model for predicting the life of tubes used in petrochemical heater service. J. Pressure Vessel Technol. 107, 239–246 (1985)CrossRefGoogle Scholar
  6. 6.
    Jaske, C.E., Simonen, F.A.: User Manual for the Computer Program pcTUBE™ for Creep Analysis of Thick-Wall Tubes. CC Technologies Systems, Inc., Dublin, Ohio (1993)Google Scholar
  7. 7.
    Jaske, C.E., Shannon, B.E.: Current Issues in Optimizing the Useful Life of Reformer Tubes, CORROSION/2007. NACE International, Houston (2007)Google Scholar

Copyright information

© ASM International 2009

Authors and Affiliations

  1. 1.DNV Columbus, Inc.DublinUSA

Personalised recommendations