Abstract
An in situ monitoring of curvature of the specimen during spraying using a high speed video system was implemented to determine stresses in thermally sprayed WC/Co coatings. Influences of different spray-ing techniques (atmospheric plasma spraying and high-velocity oxygen fuel) and cooling levels were con-sidered using a mathematical model. Results show that temperature history of a part is of paramount importance in stress generation and distribution.
Similar content being viewed by others
References
R. Knight and R.W. Smith, Residual Stress in Thermally Sprayed Coat- ings, Thermal Spray Coatings: Research and Application, C.C. Berndt and T.F. Bernecki, Ed., ASM International, 1993, p 607–612
W.J. Lenling, M.F. Smith, and J.A. Henfling, Beneficial Effects of Austempering Post-Treatment on Tungsten Carbide Based Wear Coat- ing, Thermal Spray Research and Applications, T.F. Bernecki, Ed., ASM International, 1990, p 227–232
S.C. Gill and T. W. Clyne, Stress Distributions and Material Response in Thermal Spraying of Metallic and Ceramic Deposits, Metall. Trans. B, Vol 21, April 1990, p 377–385
S. Kuroda and W. Clyne, The Quenching Stress in Thermally Sprayed Coatings, Thin Solid Films, 200,1991, p 49–66
G. Stoney, The Tension of Metallic Layers Deposited by Electrolysis, Proc. R. Soc. (London), Vol A82,1909, p 172–175
C.H. Hsueh and A.G. Evans, Residual Stresses in Metal/Ceramic Bonded Strips, J. Am. Ceram. Soc, Vol 1 (No. 5), 1985, p 24–48
S. Kuroda, T. Fukushima, and S. Kitahara, Generation Mechanisms of Residual Stresses in Plasma-Sprayed Coatings, Vacuum, Vol 41 (No. 4– 6), 1990, p1297–1299
C. Richard, “Etude des Caractéristiques Mécaniques de Revêtements Projetés par Procédés Thermique” (Studies on the Mechanical Charac- teristics of the Coatings Thermally Sprayed), thesis, Université de Technologie de Compiègne, 1992 (in French)
S.C. Gille, “Residual Stress in Plasma Sprayed Deposits,” thesis. Uni- versity of Cambridge, 1991
Y. Couiial, “Etude du Comportement Mécanique à Haute Température de Cermet WC/Co—Effet de la Microstructure,” (Studies on the Mechanical Behavior of the WC/Co Cermet Coating at High Temperature—The Ef- fect of Microstructure), thesis, I.N.S.A., Nov 1991 (in French)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Liao, H., Vaslin, P., Yang, Y. et al. Determination of residual stress distribution from in situ curvature measurements for thermally sprayed WC/Co coatings. J Therm Spray Tech 6, 235–241 (1997). https://doi.org/10.1007/s11666-997-0018-4
Issue Date:
DOI: https://doi.org/10.1007/s11666-997-0018-4