Avoid common mistakes on your manuscript.
Correction to: J Therm Spray (2022) 31:866–907 https://doi.org/10.1007/s11666-022-01366-4
In the References section, there is a correction to Ref 242. It should read as follows:
Y. Maly, Cold Sprayed SLIPS Coatings: A pathway towards process optimization and icephobicity, 2020
The original article has been updated.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Guo, D., Kazasidis, M., Hawkins, A. et al. Correction to: Cold Spray: Over 30 Years of Development Toward a Hot Future. J Therm Spray Tech 32, 322 (2023). https://doi.org/10.1007/s11666-022-01471-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11666-022-01471-4