Avoid common mistakes on your manuscript.
Correction to: JMEPEG https://doi.org/10.1007/s11665-024-09342-5
The originally published version of the article contained errors in the description of Figure 10. The reference to Fig. 10 in the sentence “From Fig. 10(a) and (d), it can be observed that the rolled alloy has a high-stress level” should read “From Fig. 10(a) and (e).” In the caption, the content of Fig. 10(b), (c), (f), and (g) was identified incorrectly. The following is the correct figure caption:
KAM maps of different alloys: (a) and (e) as-rolled; (b) and (f) T5; (c) and (g) as-solutionized; (d) and (h) T6
The article has been updated to correct the errors.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Guo, E., Cao, Y., Wang, L. et al. Correction: Effect of Heat Treatment on Microstructure and Properties of Rolled Mg-4Y-3Nd-1.5Al Alloy. J. of Materi Eng and Perform (2024). https://doi.org/10.1007/s11665-024-09540-1
Published:
DOI: https://doi.org/10.1007/s11665-024-09540-1