Abstract
The recovery and recrystallization behaviors of low-carbon interstitial-free steel are investigated at different annealing temperatures (200-690 °C) through correlation between the changes in magnetic parameters (coercivity and r.m.s. voltage), hardness, tensile strength and high-angle grain boundary fractions (HAB). Magnetic parameters and tensile strength show a significant change within recovery region (200-500 °C), while the hardness variation is very minimal at this temperature region. On the other hand, the hardness is abruptly changed compared to magnetic properties at higher annealing temperature (550-640 °C). The grain boundary characteristics and microtexture evolution occurring at recrystallization regime are evaluated by orientation imaging microscopy (OIM) and orientation distribution function (ODF) through electron backscattered diffraction (EBSD). The increase in recrystallization fraction noticeably affects microtexture property, justifying with the strengthening of γ-fiber, weakening of α-fiber and disappearance of rotated cube component with increasing annealing temperatures.
Similar content being viewed by others
References
R. K. Ray, J. J. Jonas, R. E. Hook, Cold Rolling and Annealing Textures in Low Carbon and Extra Low Carbon Steels, Int. Mat. Rev., 1994, 39, No.4
A. Haldar, S. Suwas, and D. Bhattacharjee, Microstructure and Texture in Steels, Springer, India, 2008
D.P. Field and H. Weiland, Characterization of Deformed Microstructures, Electron Backscatter Diffraction in Materials Science, A.J. Schwartz, M. Kumar, and B.L. Adams, Eds., Springer, Boston, MA, 2000
C.E.R. Torres, F.H. Sanchez, A. Gonzalez, F. Actis, and R. Herreara, Study of the Kinetics of the Recrystallization of Cold-Rolled Low-Carbon Steel, Metall. Mater. Trans. A., 2002, 33, p 25-31
J.P. Ferrer, T. De Cock, C. Capdevila, F.G. Caballero, and C.G. de Andres, Comparison of the Annealing Behaviour Between Cold and Warm Rolled ELC Steels by Thermoelectric Power Measurement, Acta. Mater., 2007, 55, p 2075-2083
J.F.C. Lins, H.R.Z. Sandim, and H.J. Kestenbach, Microstructural and Textural Characterization of a Hot-Rolled IF Steel, J. Mater. Sci., 2007, 42, p 6572-6577
A. Desalvo and F. Zignani, Electrical Resistivity Study of Recovery Phenomena in Cold-Worked Zirconium, J. Nuclr. Mater., 1966, 20, p 108-118
R.A. Renzetti, H.R.Z. Sandim, R.E. Bolmaro, P.A. Suzuki, and A. Moslang, X-ray Evaluation of Dislocation Density in ODS-Eurofer steel, Mater. Sci. Eng. A., 2012, 534, p 142-146
E. Akbari, K. K. Taheri, A. K. Taheri, The Effect of Prestrain Temperature on Kinetics of Static Recrystallization, Microstructure Evolution, and Mechanical Properties of Low Carbon Steel, J. Mater. Eng. Perform., 2018, https://doi.org/10.1007/s11665-018-3328-4
J. Degauque, B. Astie, J.L. Porteseil, and R. Vergne, Influence of the Grain Size on the Magnetic and Magnetomechanical Properties of High-Purity Iron, J. Magn. Magn. Mater., 1982, 26, p 261-263
V.E. Iordache, E. Hug, and N. Buiron, Magnetic Behaviour Versus Tensile Deformation Mechanisms in a Non-oriented Fe–(3 wt.%)Si Steel, Mater. Sci. Eng. A, 2003, 359, p 62-74
J.N. Mohapatra, S. Kumar, A. Akela, S.P. Rao, and M. Kaza, Magnetic Hysteresis Loop as a Tool for the Evaluation of Microstructure and Mechanical Properties of DP Steels, J. Mater. Eng. Perform, 2016, 25(6), p 2318-2325
H. Kumar, J.N. Mohapatra, R.K. Roy, R.J. Joseyphus, and A. Mitra, Evaluation of Tempering Behaviour in Modified 9Cr–1Mo Steel by Magnetic Non-destructive Techniques, J. Mat. Eng Proc. Tech., 2010, 210, p 669-674
M.S.C. Bose, A Study of Fatigue in Ferromagnetic Materials Using a Magnetic Hysteresis Technique, NDT Int., 1986, 19(20), p 83-87
D.C. Jiles, Magnetic Properties and Microstructure of AISI, 1000 Series Carbon Steels, J. Phys., 1988, 21, p 1186-1195
V.F. Novikov, Temperature Dependence of the Coercive Force of Deformed Silicon Iron Crystals, Soviet Phy. J., 1968, 11(2), p 16-19
A. Martinez-de-Guerenu, K. Gurruchaga, and F. Arizti, Nondestructive Characterization of Recovery and Recrystallization in Cold Rolled Low Carbon Steel by Magnetic Hysteresis Loops, J. Mag. Magn. Mater., 2007, 316, p 842-845
R.A. Renzetti, H.R.Z. Sandim, M.J.R. Sandim, A.D. Santos, A. Moslang, and D. Raabe, Annealing Effects on Microstructure and Coercive Field of Ferritic–Martensitic ODS Eurofer Steel, Mater. Sci. Engg. A., 2011, 528, p 1442-1447
A. Martinez-de-Guerenu, M. Oyarzabal, F. Arizti, and I. Gutierrez, Application of Coercive Field Measurements to the Evaluation of Recovery and Recrystallization in Cold Rolled Interstitial Free (IF) Steel, Mater. Sci. Forum, 2005, 500-501, p 647-654
M. Oyarzabal, K. Gurruchaga, A. Martinez-DE-Guerenu, and I. Gutierrez, Sensitivity of Conventional and Non-destructive Characterization Techniques to Recovery and Recrystallization, ISIJ Int., 2007, 47, p 1458-1464
A. Martinez-de-Guerenu, D. Jorge-Badiola, and I. Gutierrez, Assessing the Recovery and Recrystallization Kinetics of Cold Rolled Microalloyed Steel Through Coercive Field Measurements, Mater. Sci. Eng. A., 2017, 691, p 42-50
M. Shirdel, H. Mirzadeh, and M.H. Parsa, Estimation of the Kinetics of Martensitic Transformation in Austenitic Stainless Steels by Conventional and Novel Approaches, Mater. Sci. Eng. A., 2015, 624, p 256-260
G. Vertes, I. Meszaros, and I. Tomas, Nondestructive Magnetic Characterization of TRIP Steels, NDT&E Int., 2013, 54, p 107-114
S. Yamaura, Y. Furuya, and T. Watanabe, The Effect of Grain Boundary Microstructure on Barkhausen Noise in Ferromagnetic Materials, Acta Mater., 2001, 49, p 3019-3027
S. White, T. Krause, and L. Clapham, Control of Flux in Magnetic Circuits for Barkhausen Noise Measurements, Meas. Sci. Technol., 2007, 18, p 3501-3510
Kizkitza Gurruchaga, Ane Martinez-de-Guerenu, Miguel Soto, and Fernando Arizti, Efficacy of Magnetic Inductive Parameters for Annealing Characterization of Cold Rolled Low Carbon Steel, IEEE Trans., 2008, 44(11), p 3839-3842
M. Blaow and A. Shaw, Evaluation of Annealing Stages in Low Carbon Steel Using Magnetic Barkhausen Noise, IJEIT., 2014, 1, p 1
J. Won Byeon and S.I. Kwun, Magnetic Nondestructive Evaluation of Thermally Degraded 2.25Cr–1Mo steel, Mater. Lett., 2003, 58, p 94-98
A. Mitra, J.N. Mohapatra, J. Swaminathan, M. Ghosh, A.K. Panda, and R.N. Ghosh, Magnetic Evaluation of Creep in Modified 9Cr–1Mo Steel, Scr. Mater., 2007, 57, p 813-816
J.C. Sancheza, M.A. Camposa, and L.R. Padovese, Magnetic Barkhausen Measurements for Evaluating the Formation of Luders Bands in Carbon Steel, NDT&E Intel, 2007, 40, p 520-524
A. Martinez-de-Guerenu, F. Ariztia, M. Dıaz-Fuentes, and I. Gutierrez, Recovery During Annealing in Cold Rolled Low Carbon Steel, Part I: Kinetics and Microstructural Characterization, Acta Mater., 2004, 52, p 3657-3664
R. K. Roy, S. Dutta, A.K. Panda, V. Rajinikanth, S. K. Das, A. Mitra, M. Strangwood and C. L. Davis, Assessment of recovery and recrystallisation behaviours of cold rolled IF steel through non-destructive electromagnetic characterization, phil Mag., 2018, 98, p 21
I. Thomas, S. Zaefferer, and D. Rabbe, High Resolution EBSD Investigation of Deformed and Partially Recrystallized IF Steel, Adv. Eng. Mater., 2003, 5(7), p 566-570
D.I.K. Kim, K.H. Oh, and H.C. Lee, Statistical Analysis on the Development of Recrystallization Texture in IF Steel, Mat.sci.forum, 2002, 408, p 839-844
H. Mirzadeha, J.M. Cabrera, A. Najafizadeh, and P.R. Calvillo, EBSD Study of a Hot Deformed Austenitic Stainless Steel, Mater. Sci. Eng. A., 2012, 538, p 236-245
H. Jazaeri and F.J. Humphreys, Quantifying Recrystallization by Electron Backscatter Diffraction, J. Microsc., 2004, 213, p 241-246
R.J. Maccabe and D.F. Teter, Analysis of Recrystallized Volume Fractions in Uranium Using Electron Backscatter Diffraction, J. Microsc., 2006, 223, p 33-39
R.K. Roy, A.K. Panda, and A. Mitra, An electromagnetic sensing device for microstructural Phase determination of steels through non-destructive evaluation, proceeding of 6th Int. Conf. Sensing Technology (ICST 2012), Kolkata, India, 18-21 Dec., IEEE Xplore, 2012, p.226-229
F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Science Ltd., Oxford, UK, 2004
V. Randle, O. Engler, Introduction to Texture Analysis Macrotexture, Microtexture and Orientation mapping. 2000
R.K. Lucke, Texture and Microstructure of Hot Rolled Steel, Scr. Metallurg. Mater. (texture), 1992, 26, p 1221-1226
Y.B. Park, D.N. Lee, and G. Gottstein, Evolution of Recrystallisation Textures from Cold Rolling Textures in Interstitial Free Steel, Mat. Sci Tech., 1997, 13, p 289
A.S. Meziou, A.L.H. Etter, and T. Baudin, Comparison Between Recrystallization Mechanisms in Copper and Ti-IF Steel After a Low Amount of Deformation, Mater Sci Eng A., 2011, 528, p 3829-3832
M. Kupferling, F. Fiorillo, V. Basso, G. Bertotti, and P. Meilland, Barkhausen Noise in Plastically Deformed Low-Carbon Steels, J. Magn. Magn. Mater., 2008, 320, p e527-e530
P. Gaunt, Ferromagnetic Domain Wall Pinning by a Random Array of in Homogeneities, Phil. Mag. B., 1983, 48, p 261-276
B.T.Hailer, Effect of Heat Treatment on Magnetic and Mechanical Properties of an Iron-Cobalt-Vanadium-Niobium Alloy., 2001
Jian Wang, Jun Li, Xiaochuan Mi, Shengen Zhang, and Alex A. Volinsky, Rapid Annealing Effects on Microstructure, Texture, and Magnetic Properties of Non-oriented Electrical Steel, Met. Mate Int., 2012, 3, p 531-537
H. Jazaeri and F.J. Humphreys, Quantifying Recrystallization by Electron Backscatter Diffraction, J. Microsc., 2004, 213, p 241-246
H. Kikuchi, F. Ito, T. Murakami, and K. Takekawa, Relationship Between Magnetic Properties and Hardness and its Effect on Recovery and Recrystallization in Cold-Rolled Steel, IEEE Trans. Magn., 2015, 51, p 11
Acknowledgments
The authors would like to express their sincere thanks to the Director, CSIR-National Metallurgical Laboratory, Jamshedpur, for his permission to publish the paper. The financial assistance to one of the authors (Siuli Dutta) by council of Scientific and Industrial Research, India, is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Dutta, S., Rajinikanth, V., Panda, A.K. et al. Effect of Annealing Treatment on Mechanical and Magnetic Softening Behaviors of Cold Rolled Interstitial-Free Steel. J. of Materi Eng and Perform 28, 2228–2236 (2019). https://doi.org/10.1007/s11665-019-03953-z
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-019-03953-z