The present study estimates the effect on Young’s modulus of the percentage and thickness of iron hollow spheres reinforcing copper syntactic foams. The resulting materials were modeled by inserting hollow spheres in a random arrangement, using a combination of Discrete Element Method (DEM) for generating the sphere location coordinates and Finite Element Analysis (FEA). Estimations for syntactic foams were compared to those obtained for conventional copper foams with the same porosity. Results showed that the elastic modulus of both syntactic and conventional foams drops significantly as the percentage of spheres or porosity increases. Furthermore, the increase in the wall thickness of the iron hollow spheres leads to significant rises in the Young’s modulus. Depending on the desired mechanical properties, the outcomes presented in this work could be used for selecting the kind of foam (syntactic or conventional) and predesign some characteristics such as porosity or thickness of the spheres or pores.
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Price includes VAT for USA
Subscribe to journal
Immediate online access to all issues from 2019. Subscription will auto renew annually.
This is the net price. Taxes to be calculated in checkout.
J. Banhart, Manufacture, Characterisation and Application of Cellular Metals and Metal Foams, Prog. Mater. Sci., 2001, 46, p 559–632
M.F. Ashby, A.G. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, and H.N.G. Wadley, Metal Foams: A Design Guide, 1st ed., Butterworth-Heinemann, Ed., Woburn, 2000, p 1–447
A.E. Belhadj, A. Gavrus, F. Bernard, and M. Azzaz, Mechanical and Numerical Analysis Concerning Compressive Properties of Tin-Lead Open-Cell Foams, J. Mater. Eng. Perform., 2015, 24, p 4140–4155
M. Yu, P. Zhu, and Y. Ma, Effects of Particle Clustering on the Tensile Properties and Failure Mechanisms of Hollow Spheres Filled Syntactic Foams: A Numerical Investigation by Microstructure Based Modeling, Mater. Des., 2013, 47, p 80–89
W.S. Sanders and L.J. Gibson, Mechanics of Hollow Sphere Foam, Mater. Sci. Eng. A, 2003, 34, p 770–785
I.N. Orbulov and J. Ginsztler, Compressive Characteristics of Metal Matrix Syntactic Foams, Compos. Part A, 2012, 43, p 553–561
A. Szlancsik, B. Katona, K. Bobor, K. Májlinger, and I.N. Orbulov, Compressive Behaviour of Aluminium Matrix Syntactic Foams Reinforced by Iron Hollow Spheres, Mater. Des., 2015, 83, p 230–237
X. Xue, L. Wang, M. Wang, W. Lü, and D. Zhang, Manufacturing, Compressive Behaviour and Elastic Modulus of Ti matrix Syntactic Foam Fabricated by Powder Metallurgy, Trans. Nonferr. Met. Soc. China, 2012, 22, p s188–s192
X.F. Tao, L.P. Zhang, and Y.Y. Zhao, Al Matrix Syntactic Foam Fabricated with Bimodal Ceramic Microspheres, Mater. Des., 2009, 30, p 2732–2736
F.V. Antunes, J.A.M. Ferreira, and C. Capela, Numerical Modelling of the Young’s Modulus of Syntactic Foams, Finite Elem. Anal. Des., 2011, 47, p 78–84
P.K. Rohatgi, N. Gupta, B.F. Schultz, and D.D. Luong, The Synthesis, Compressive Properties, and Applications of Metal Matrix Syntactic Foams, JOM, 2011, 63, p 36–42
L.F. Nielsen, Elasticity and Damping of Porous Materials and Impregnated Materials, J. Am. Ceram. Soc., 1984, 1984(67), p 93–98
H.X. Zhu, J.F. Knott, and N.J. Mills, Analysis of the Elastic Properties of Open-Cell Foams with Tetrakaidecahedral Cells, J. Mech. Phys. Solids, 1997, 45, p 319–343
A. Hasan, An Improved Model for FE Modeling and Simulation of Closed Cell Al-Alloy Foams, Adv. Mater. Sci. Eng., 2010, 2010, p 1–12
D. Meric and H. Gedikli, Energy Absorption Behavior of Tailor-Welded Tapered Tubes Under Axial Impact Loading Using Coupled FEM/SPH Method, Thin-Walled Struct., 2016, 104, p 17–33
M. Kırca, A. Gul, E. Ekinci, F. Yardım, and A. Mugan, Computational Modeling of Micro-cellular Carbon Foams, Finite Elem. Anal. Des., 2007, 44, p 45–52
J.H. Cadena, I. Alfonso, J.H. Ramírez, V. Rodríguez-Iglesias, I.A. Figueroa, and C. Aguilar, Improvement of FEA Estimations for Compression Behavior of Mg Foams Based on Experimental Observations, Comput. Mater. Sci., 2014, 91, p 359–363
S. Kari, H. Berger, U. Gabbert, R. Guinovart-Dıaz, J. Bravo-Castillero, and R. Rodrıguez-Ramos, Evaluation of Influence of Interphase Material Parameters on Effective Material Properties of Three Phase Composites, Compos. Sci. Technol., 2008, 68, p 684–691
L. Pérez, S. Lascano, C. Aguilar, D. Estay, U. Messner, I.A. Figueroa, and I. Alfonso, DEM-FEA Estimation of Pores Arrangement Effect on the Compressive Young’s Modulus for Mg Foams, Comput. Mater. Sci., 2015, 110, p 281–286
R. Dobry and T.T. Ng, Discrete Modeling of Stress-Strain Behavior of Media at Small and Large Strain, Eng. Comput., 1992, 9, p 129–143
A. Bálint and A. Szlancsik, Mechanical Properties of Iron Hollow Sphere Reinforced Metal Matrix Syntactic Foams, Mater. Sci. Forum, 2015, 812, p 3–8
H. Fredriksson, K. Hansson, and A. Olsson, On the Mechanism of Liquid Copper Penetration into Iron Grain Boundaries, Scand. J. Metall., 2001, 30, p 41–50
C. Kloss, C. Goniva, A. Hager, S. Amberger, and S. Pirker, Models, Algorithms and Validation for Opensource DEM and CFD-DEM, Prog. Comput. Fluid Dyn., 2012, 12, p 140–152
S.K. Sebsadji and K. Chouicha, Determining Periodic Representative Volumes of Concrete Mixtures Based on the Fractal Analysis, Int. J. Solids Struct., 2012, 49, p 2941–2950
L. Pérez, S. Lascano, C. Aguilar, D. Domancic, and I. Alfonso, Simplified Fractal FEA Model for the Estimation of the Young’s Modulus of Ti Foams Obtained by Powder Metallurgy, Mater. Des., 2015, 83, p 276–283
R.K. Everett and R.J. Arsenault, Ed., Metal Matrix Composites: Processing and Interface, Academic Press, New York, 1991
L. Pérez acknowledges the financial support from the Advanced Center for Electrical and Electronic Engineering, AC3E, Basal Project FB0008, CONICYT. I. Alfonso would like to acknowledge the financial support from UNAM PAPIIT IN117316. R. Drew acknowledges the financial support from PREI DGAPA UNAM.
About this article
Cite this article
Pérez, L., Villalobos, M., Órdenes, C. et al. Elastic Modulus Estimation for Copper Syntactic Foams Reinforced with Iron Hollow Spheres of Different Wall Thicknesses. J. of Materi Eng and Perform 28, 100–106 (2019). https://doi.org/10.1007/s11665-018-3827-3