Functional Properties of Porous Ti-48.0 at.% Ni Shape Memory Alloy Produced by Self-Propagating High-Temperature Synthesis
- 76 Downloads
The functional behavior of the porous shape memory alloy produced by self-propagating high-temperature synthesis from the Ti-48.0 at.% Ni powder mixture was studied. It was found that a large unelastic strain recovered on unloading and it was not attributed to the pseudoelasticity effect. A decrease in deformation temperatures did not influence the value of strain that recovered on unloading, while the effective modulus decreased from 1.9 to 1.44 GPa. It was found that the porous Ti-48.0 at.% Ni alloy revealed the one-way shape memory effect, where the maximum recoverable strain was 5%. The porous Ti-48.0 at.% Ni alloy demonstrated the transformation plasticity and the shape memory effects on cooling and heating under a stress. An increase in stress did not influence the shape memory effect value, which was equal to 1%. It was shown that the functional properties of the porous alloy were determined by the TiNi phase consisted of the two volumes Ti49.3Ni50.7 and Ti50Ni50 where the martensitic transformation occurred at different temperatures. The results of the study showed that the existence of the Ti49.3Ni50.7 volumes in the porous Ti-48.0 at.% Ni alloy improved the functional properties of the alloy.
Keywordsmechanical behavior porous TiNi shape memory alloy self-propagating high-temperature synthesis shape memory effects
The study has been carried out through the financial support by Russian Foundation for Basic Research (Project Number 15-08-05021-a). Authors thank to Roman Badun for the participation in experiments.
- 2.C.E. Wen, J.Y. Xiong, Y.C. Li, and P.D. Hodgson, Porous Shape Memory Alloy Scaffolds for Biomedical Applications: A Review, Phys. Scr., 2010, https://doi.org/10.1088/0031-8949/2010/t139/014070 Google Scholar
- 3.A. Kennedy, Porous Metals and Metal Foams Made from Powders, Powder Metallurgy, K. Kohdoh, Ed., InTech, Croatia, 2012. https://www.intechopen.com/books/powder-metallurgy
- 9.V.I. Itin, V.N. Khachin, A.D. Bratchikov, V.E. Gyunter, E.F. Dudarev, T.V. Monasevich, D.B. Chernov, G.D. Timonin, and A.P. Paperskii, Structure and Properties of Titanium Nickelide Materials made by Self-Propagating High-Temperature Synthesis, Sov. Phys. J., 1977, 20, p 1631–1633CrossRefGoogle Scholar
- 10.A.D. Bratchikov, A.G. Merzhanov, V.I. Itin, V.N. Khachin, E.F. Dudarev, V.E. Gyunter, V.M. Maslov, and D.B. Chernov, Self-Propagating High-Temperature Synthesis of Titanium Nickelide, Sov. Powder Metall. Met. Ceram., 1980, 19, p 5–8Google Scholar
- 11.V.I. Itin, V.N. Khachin, V.E. Gyunter, A.D. Bratchikov, and D.B. Chernov, Production of Titanium Nickelide by Self-Propagating High-Temperature Synthesis, Sov. Powder Metall. Met. Ceram., 1983, 22, p 156–157Google Scholar
- 22.N. Resnina, S. Belayev, and A. Voronkov, Influence of Chemical Composition and Pre-heating Temperature on the Structure and Martensitic Transformation in Porous TiNi-Based Shape Memory Alloys, Produced by self-Propagating High-Temperature Synthesis, Intermetallics, 2013, 32, p 81–89CrossRefGoogle Scholar
- 26.C. Zanotti, P. Giuliani, P. Bassani, F. Passaretti, A. Tuissi, Characterization of Porous NiTi Alloys Produced by SHS, in Proceedings of the International Conference on Shape Memory and Superelastic Technologies (May 7–11, 2006, Pacific Grove, California, USA, Brian Berg, M.R. Mitchell, and Jim Proft, editors), (2008). p. 373–380Google Scholar