Abstract
This research paper focuses on a novel duplex treatment combining low-pressure carburizing and laser quenching to reach high surface hardness and hardening depth, improving wear resistance and mechanical properties. Results of microstructural analysis, micro- and nanohardness, wear and x-ray diffraction tests, carried out on laser-treated, carburized and duplex-treated C20 low-alloy steel, demonstrate that the novel duplex treatment developed greatly enhances wear resistance of the material.
Similar content being viewed by others
References
R. Sola, G. Poli, R. Giovanardi, C. Calzolari, and A. Zanotti, Wear and Corrosion Resistance Modification of Nitrided and Nitrocarburized Steels, Met. Ital., 2010, 102(4), p 29–39
E.J. Mittemeijer and M.A.J. Somers, Thermodynamics, Kinetics and Process Control of Nitriding, Surf. Eng., 1997, 13, p 483–497
R. Sola, G. Poli, P. Veronesi, and R. Giovanardi, Effects of Surface Morphology on the Wear and Corrosion Resistance of Post-treated Nitrided and Nitrocarburized 42CrMo4 Steel, Met. Mat. Trans. A, 2014, 45(6), p 2827–2833
R. Giovanardi, G. Poli, R. Sola, and P. Veronesi, Corrosion Resistance Improvement of Nitrocarburised and Post-oxidised Steels by Oil Impregnation, Corr. Eng. Sci. Technol., 2012, 47(2), p 107–115
A.C. Rovani, A.E. Crespi, V. Sonda, F. Cemin, F.G. Echeverrigaray, C.L.G. Amorim, R.L.O. Basso, I.J.R. Baumvol, and C.A. Figueroa, Plasma Post-oxidation Mechanisms of Nitrided Ferrous Alloys, Surf. Coat. Technol., 2011, 205(11), p 3422–3428
N. Karimzadeh, E.G. Moghaddam, M. Mirjani, and K. Raeissi, The Effect of Gas Mixture of Post-oxidation on Structure and Corrosion Behavior of Plasma Nitrided AISI, Stainless Steel, Appl. Surf. Sci., 2013, 283, p 584–589
M. Pérez and F.J. Belzunce, A Comparative Study of Salt-Bath Nitrocarburizing and Gas Nitriding Followed by Post-oxidation Used as Surface Treatments of H13 Hot Forging Dies, Surf. Coat. Technol., 2016, 305, p 146–157
R. Sola, G. Poli, P. Veronesi, R. Giovanardi, S. Mamei, and A. Zanotti, Effect of Surface Finishing and Post-oxidation Atmosphere on the Properties of 41CrAlMo7 Nitrided Steel, Met. Ital., 2012, 104(5), p 35–40
A.C. Rovani, R.R. Fischer, F. Cemin, F.G. Echeverrigaray, R.L.O. Basso, C.L.G. Amorim, G.V. Soares, I.J.R. Baumvol, and C.A. Figueroa, Effect of Hydrogen on Plasma Post-oxidation of Ferrous Alloys, Scr. Mater., 2010, 62(11), p 863–866
B. Podgornik, J. Vizintin, O. Wanstrand, M. Larsson, and S. Hogmark, Wear and Friction Behavior of Duplex-Treated AISI, 4140 Steel, Surf. Coat. Technol., 1999, 120–121, p 502–508
M. Pellizzari, A. Molinari, and G. Straffellini, Thermal Fatigue Resistance of Plasma Duplex-Treated Tool Steel, Surf. Coat. Technol., 2001, 142–144, p 1109–1115
B. Podgornik, S. Hogmark, O. Sandberg, and V. Leskovsek, Wear Resistance and Anti-sticking Properties of Duplex Treated Forming Tool Steel, Wear, 2003, 254, p 1113–1121
I. Boromei, L. Ceschini, A. Marconi, and C. Martini, A Duplex Treatment to Improve the Sliding Behavior of AISI, 316L: Low-Temperature Carburizing with a DLC (a-C:H) Topcoat, Wear, 2013, 302, p 899–908
M. Tsujikawa, D. Yoshida, N. Yamauchi, N. Ueda, T. Sone, and S. Tanaka, Surface Material Design of 316 Stainless Steel by Combination of Low Temperature Carburizing and Nitriding, Surf. Coat. Technol., 2005, 200, p 507–511
B. Miao, Y. Chai, K. Wei, and J. Hu, A Novel Duplex Plasma Treatment Combining Plasma Nitrocarburizing and Plasma Nitriding, Vacuum, 2016, 133, p 54–57
F.M. El-Hossary, N.Z. Negm, A.M. Abd El-Rahman, and M. Hammad, Duplex Treatment of 304 AISI, Stainless Steel Using rf Plasma Nitriding and Carbonitriding, Mater. Des., 2014, 60, p 580–586
F. Haftlang, A. Habibolahzadeh, and M.H. Sohi, Comparative Tribological Studies of Duplex Surface Treated AISI, 1045 Steels Fabricated by Combinations of Plasma Nitriding and Aluminizing, Mater. Des., 2014, 60, p 580–586
E. Colombini, R. Sola, G. Parigi, P. Veronesi, and G. Poli, Laser Quenching of Ionic Nitrided Steel: Effect of Process Parameters on microstructure and Optimization, Metall. Mater. Trans. A, 2014, 45A, p 5562
M. Kulka and A. Perteck, Laser Surface Modification of Carburized and Borocarburized 15CrNi6 Steel, Mater. Charact., 2007, 58, p 461–470
M.F. Yan, Y.X. Wang, X.T. Chen, L.X. Guo, C.S. Zhang, Y. You, B. Bai, L. Chen, Z. Long, and R.W. Li, Laser Quenching of Plasma Nitrided 30CrMaSiA Steel, Mater. Des., 2014, 58, p 154–160
Y.X. Wang, M.F. Yan, B. Li, L.X. Guo, C.S. Zhang, B. Bai, L. Chen, Z. Long, and R.W. Li, Surface Properties of Low Alloy Steel Treated by Plasma Nitrocarburizing Prior to Laser Quenching Process, Opt. Laser Technol., 2015, 67, p 57–64
A. Shokrani, V. Dhokia, and S.T. Newman, Investigation of the Effects of Cryogenic Machining on the Surface Integrity in CNC and Milling of Ti-6Al-4V Titanium Alloy, J. Manuf. Process., 2016, 21, p 172–179
G.F. Bocchini, G. Poli, R. Sola, and P. Veronesi, Comparison—by nanoindentation—among PM steels obtained from diffusion-bonded powders (nominally equivalent), in Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010, vol 3, 2010
R. Sola, R. Giovanardi, G. Parigi, and P. Veronesi, A Novel Method for Fracture Toughness Evaluation of Tool Steels With Post-tempering Cryogenic Treatment, Metals, 2017, 7(3), p 75
G.E. Fougere, L. Riester, M. Ferber, J.R. Weetman, and R.W. Siegal, Young’s Modulus of Nanocrystalline Fe Measured by Nanoindetation, Mater. Sci. Eng. A, 1995, A204, p 1–6
H.T. Chen, M.F. Yan, and S.S. Fu, Martensite Transformation Induced by Plasma Nitrocarburizing on AISI304 Austenitic Stainless Steel, Vacuum, 2014, 105, p 33–38
S.K. Balijepalli, I. Colantoni, R. Donnini, S. Kaciulis, M. Lucci, R. Montanari, N. Ucciardello, and A. Varone, Modulo Elastico Della Fase S in un Acciaio 316L Kolsterizzato, La Metall. Ital., 2013, 1, p 42–47
Z. Chen, G. Zhou, and Z. Chen, Microstructure and Hardness Investigation of 17-4PH Stainless Steel by Laser Quenching, Mater. Sci. Eng. A, 2012, 534, p 536–541
E. Colombini, G.F. Bocchini, G. Parigi, R. Sola, P. Veronesi, and G. Poli, Laser Hardening of Homogeneous and Inhomogeneous p/m Steels, La Metall. Ital., 2015, 107(10), p 15–24
G.F. Bocchini, E. Colombini, R. Sola, P. Veronesi, G. Poli, and G. Parigi, Laser hardening of homogeneous or not-homogeneous PM steels, in Proceedings of the 2014 World Congress on Powder Metallurgy and Particulate Materials, PM 2014, 2014, pp 668–683
P. Kula, R. Pietrasik, and K. Dybowski, Vacuum Carburizing—Process Optimization, J. Mater. Process. Technol., 2005, 164–165, p 876–881
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sola, R., Veronesi, P., Giovanardi, R. et al. A Novel Duplex Treatment of C20 Steel Combining Low-Pressure Carburizing and Laser Quenching. J. of Materi Eng and Perform 26, 5396–5403 (2017). https://doi.org/10.1007/s11665-017-2965-3
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-017-2965-3