Abstract
Microstructure and mechanical properties of the Mg94Y4Ni2 alloy (at.%) during homogenization, extrusion, and aging processes were systematically investigated using x-ray diffractometer, optical microscopy, scanning electron microscopy, transmission electron microscopy, and electronic universal testing machine. The results showed that the morphology evolution of 18R LPSO structure during annealing in Mg94Y4Ni2 alloy was different from that of Mg-Y-Zn systems. The 18R-type Mg12YNi phase was thermal stable and was not transformed into 14H structure when annealed at 773 K. After solution treatment at 773 K for 10 h and aging at 498 K for 24 h (T6 treatment) of the extruded alloy, a great amount of fine β′ phases were precipitated dispersedly in the matrix. The tensile tests showed that the extruded Mg94Y4Ni2 alloy after T6 treatment exhibited good tensile properties with ultimate tensile strength of 453 MPa and elongation to failure of 2.4% at room temperature. Thus, a high-strength Mg94Y4Ni2 alloy, which is strengthened by the coexisted LPSO phases and β′ precipitates, can be prepared via simple hot extrusion and T6 treatment.
Similar content being viewed by others
References
T. Honma, T. Ohkubo, S. Kamado, and K. Hono, Effect of Zn Additions on the Age-Hardening of Mg-2.0Gd-1.2Y-0.2Zr Alloys, Acta Mater., 2007, 55(12), p 4137–4150
M. Yamasaki, K. Hashimoto, K. Hagihara, and Y. Kawamura, Effect of Multimodal Microstructure Evolution on Mechanical Properties of Mg-Zn-Y Extruded Alloy, Acta Mater., 2011, 59(9), p 3646–3658
Y. Kawamura, K. Hayashi, A. Inoue, and T. Masumoto, Rapidly Solidified Powder Metallurgy Mg97Zn1Y2 Alloys with Excellent Tensile Yield Strength Above 600 MPa, Mater. Trans., 2001, 42(7), p 1172–1176
E. Abe, Y. Kawamura, K. Hayashi, and A. Inoue, Long-Period Ordered Structure in a High-Strength Nanocrystalline Mg-1at%Zn-2at%Y Alloy Studied by Atomic-Resolution Z-Contrast STEM, Acta Mater., 2002, 50(15), p 3845–3847
M. Matsuda, S. Ii, Y. Kawamura, Y. Ikuhara, and M. Nishida, Variation of Long-Period Stacking Order Structures in Rapidly Solidified Mg97Zn1Y2 Alloy, Mater. Sci. Eng. A, 2005, 393(1-2), p 269–274
T. Itoi, T. Inazawa, Y. Kuroda, M. Yamasaki, Y. Kawamura, and M. Hirohashi, Tensile Property and Cold Formability of a Mg96Zn2Y2 Alloy Sheet with a Long-Period Ordered Phase, Mater. Lett., 2010, 64(21), p 2277–2280
Y. Kawamura and M. Yamasaki, Formation and Mechanical Properties of Mg97Zn1RE2 Alloys with Long-Period Stacking Ordered Structure, Mater. Trans., 2007, 48(11), p 2986–2992
Y. Kawamura, T. Kasahara, S. Izumi, and M. Yamasaki, Elevated Temperature Mg97Y2Cu1 Alloy with Long Period Ordered Structure, Scr. Mater., 2006, 55(5), p 453–456
T. Itoi, K. Takahashi, H. Moriyama, and M. Hirohashi, A High-Strength Mg-Y-Ni Alloy Sheet with a Long-Period Ordered Phase Prepared by Hot-Rolling, Scr. Mater., 2008, 59(10), p 1155–1158
B. Chen, D.L. Lin, X.Q. Zeng, and C. Lu, Microstructure and Mechanical Properties of Ultrafine Grained Mg97Y2Zn1 Alloy Processed by Equal Channel Angular Pressing, J. Alloys Compd., 2007, 440(1-2), p 94–100
J.F. Wang, P.F. Song, S. Gao, Y.Y. Wei, and F.S. Pan, Influence of Y on the Phase Composition and Mechanical Properties of As-Extruded Mg-Zn-Y-Zr Magnesium Alloys, J. Mater. Sci., 2012, 47(4), p 2005–2010
C. Xu, S.W. Xu, M.Y. Zheng, K. Wu, E.D. Wang, S. Kamado, G.J. Wang, and X.Y. Lv, Microstructure and Mechanical Properties of Rolled Sheets of Mg-Gd-Y-Zn-Zr Alloy: As-Cast Versus As-Homogenized, J. Alloys Compd., 2012, 528, p 40–44
J.F. Wang, P.F. Song, S. Gao, X.F. Huang, Z.Z. Shi, and F.S. Pan, Effects of Zn on the Microstructure, Mechanical Properties, and Damping Capacity of Mg-Zn-Y-Zr Alloys, Mater. Sci. Eng. A, 2011, 528(18), p 5914–5920
D.D. Yin, Q.D. Wang, Y. Gao, C.J. Chen, and J. Zheng, Effects of Heat Treatments on Microstructure and Mechanical Properties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) Alloy, J. Alloys Compd., 2011, 509(5), p 1696–1704
K. Liu, J.H. Zhang, D.X. Tang, L.L. Rokhlin, F.M. Elkin, and J. Meng, Precipitates Formed in a Mg-7Y-4Gd-0.5Zn-0.4Zr Alloy During Isothermal Aging at 250 °C, Mater. Chem. Phys., 2009, 117(1), p 107–112
G.L. Bi, D.Q. Fang, L. Zhao, Q.X. Zhang, J.S. Lian, Q. Jiang, and Z.H. Jiang, Double-Peak Aging Behavior of Mg-2Dy-0.5Zn Alloy, J. Alloys Compd., 2011, 509(32), p 8268–8275
L. Zheng, C.M. Liu, Y.C. Wan, P.W. Yang, and X. Shu, Microstructures and Mechanical Properties of Mg-10Gd-6Y-2Zn-0.6Zr(wt.%) Alloy, J. Alloys Compd., 2011, 509(35), p 8832–8839
J.B. Lee, K. Sato, T.J. Konno, and K. Hiraga, Complex Precipitates with Long Periodic Stacking (LPS) Phase and Precipitation Behaviors in Mg97Zn1Y1.5Nd0.5 Alloy by Age-Annealing, Intermetallics, 2011, 19(8), p 1096–1101
X.H. Shao, Z.Q. Yang, J.H. You, K.Q. Qiu, and X.L. Ma, Microstructure and Microhardness Evolution of a Mg83Ni6Zn5Y6 Alloy Upon Annealing, J. Alloys Compd., 2011, 509(26), p 7221–7228
T. Itoi, T. Seimiya, Y. Kawamura, and M. Hirohashi, Long Period Stacking Structures Observed in Mg97Zn1Y2 Alloy, Scr. Mater., 2004, 51(2), p 107–111
Y.M. Zhu, A.J. Morton, and J.F. Nie, The 18R and 14H Long-Period Stacking Ordered Structures in Mg-Y-Zn Alloys, Acta Mater., 2010, 58(8), p 2936–2947
Z.G. Su, R.G. Li, J. An, and Y. Lu, Effect of Rolling Temperature on the Microstructures and Mechanical Properties of Mg97Zn1Y2 Magnesium Alloy, J. Mater. Eng. Perform., 2010, 19(1), p 70–76
J.F. Wang, S. Gao, P.F. Song, X.F. Huang, Z.Z. Shi, and F.S. Pan, Effects of Phase Composition on the Mechanical Properties and Damping Capacities of As-Extruded Mg-Zn-Y-Zr Alloys, J. Alloys Compd., 2011, 509(34), p 8567–8572
Y.M. Zhu, M. Weyland, A.J. Morton, K. Oh-ishi, K. Hono, and J.F. Nie, The Building Block of Long-Period Structures in Mg-RE-Zn Alloys, Scr. Mater., 2009, 60(11), p 980–983
X.H. Shao, Z.Q. Yang, and X.L. Ma, Strengthening and Toughening Mechanisms in Mg-Zn-Y Alloy with a Long Period Stacking Ordered Structure, Acta Mater., 2010, 58(14), p 4760–4771
M. Yamasaki, M. Sasaki, M. Nishijima, K. Hiraga, and Y. Kawamura, Formation of 14H Long Period Stacking Ordered Structure and Profuse Stacking Faults in Mg-Zn-Gd Alloys During Isothermal Aging at High Temperature, Acta Mater., 2007, 55(20), p 6798–6805
K.J. Li and Q.A. Li, Microstructure and Superior Mechanical Properties of Cast Mg-12Gd-2Y-0.5Sm-0.5Sb-0.5Zr Alloy, Mater. Sci. Eng. A, 2011, 528(16-17), p 5453–5457
K. Hagihara, A. Kinoshita, Y. Sugino, M. Yamasaki, Y. Kawamura, H.Y. Yasuda, and Y. Umakoshi, Effect of Long-Period Stacking Ordered Phase on Mechanical Properties of Mg97Zn1Y2 Extruded Alloy, Acta Mater., 2010, 58(19), p 6282–6293
Z. Leng, J.H. Zhang, M.L. Zhang, X.H. Liu, H.B. Zhan, and R.Z. Wu, Microstructure and High Mechanical Properties of Mg-9RY-4Zn (RY: Y-Rich Misch Metal) Alloy with Long Period Stacking Ordered Phase, Mater. Sci. Eng. A, 2012, 540, p 38–45
Acknowledgments
The authors are grateful for the financial support of the Natural Science Foundation of Jiangsu Province of China (No. BK2010392) and the Scientific Research Foundation of Graduate School of Southeast University (No. YBJJ1236).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, H., Xue, F., Bai, J. et al. Microstructure and Mechanical Properties of a Mg94Y4Ni2 Alloy with Long Period Stacking Ordered Structure. J. of Materi Eng and Perform 22, 3500–3506 (2013). https://doi.org/10.1007/s11665-013-0617-9
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-013-0617-9