Abstract
A (Ti,V)C/Fe composite was produced by a process which combines in situ synthesis with powder metallurgy technique using Ti, Fe, FeV and carbon powder. The microstructure of the Fe-(Ti,V)C composite was studied by scanning electron microscope and x-ray diffraction. The results show that the production of an iron matrix composite reinforced by (Ti,V)C particulates using the process is feasible. Fine (Ti,V)C particles are uniformly dispersed in the pearlite. The Fe-(Ti,V)C composite possesses excellent wear-resistance under the condition of dry sliding with heavy loads.
References
K. Das and T.K. Bandyopadhyay, Effect of Form of Carbon on the Microstructure of In Situ Synthesized TiC-Reinforced Iron-Based Composite, Mater. Lett., 2004, 5, p 1877–1880
E.M. Ruiz-Navas, R. García, E. Gordo, and F. Velasco, Development and Characterisation of High-Speed Steel Matrix Composites Gradient Materials, J. Mater. Process. Technol., 2003, 143–144, p 769–775
X. Zhang, W. Lu, D. Zhang, and R. Wu, In Situ Technique for Synthesizing (TiB+TiC)/Ti Composites, Scr. Mater., 1999, 41(1), p 39–46
Ö.N. Dogan and J.A. Hawk, Abrasion Resistance of In-Situ Fe-TiC Composites, Scr. Metall., 1995, 33(6), p 953–958
A. Farid, S. Guo, F.-e. Cui et al., TiB2 and TiC Stainless Steel Matrix Composites, Mater. Lett., 2007, 61, p 189–191
W.H. Jiang, J. Fei, and X.L. Han, In Situ Synthesis of (TiW)Cp/Fe Composites, Mater. Lett., 2000, 46, p 222–224
R. Sepúlveda and F. Arenas, TiC-VC-Co: A Study on Its Sintering and Microstructure, Int. J. Refract. Met. Hard Mater., 2001, 19, p 389–396
K. Aigner, W. Lengauer, and P. Ettmayer, Interactions in Iron-Based Cermet Systems, J. Alloys Compd., 1997, 262–263, p 486–491
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fu, S., Xu, H. Microstructure and Wear Behavior of (Ti,V)C Reinforced Ferrous Composite. J. of Materi Eng and Perform 19, 825–828 (2010). https://doi.org/10.1007/s11665-009-9553-0
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-009-9553-0