Improved Ni ohmic contact on n-type 4H-SiC

Abstract

This paper presents the structural, chemical and electronic properties of Al/Ni/ Al-layers evaporated on 4H silicon carbide and then annealed at 1000°C for 5 min. The structure was investigated before and after annealing by transmission electron spectroscopy from cross-sectional specimens. With x-ray photoelectron spectroscopy, both element distribution and bonding energies were followed during sputtering through the alloyed metal-semiconductor contact. Voids are found in both annealed Ni/4H-SiC and Al/Ni/Al/4H-SiC contact layers, though closer to the metal-semiconductor interface in the former case. The first aluminum-layer is believed to prevent voids to be formed at the interface and also to reduce the oxide on the semiconductor surface. The contact was found to be ohmic with a specific contact resistance ρ_c - 1.8 × 10⁻⁵ Ωcm² which is more than three times lower ρ_c than for the ordinary Ni/4H-SiC contact prepared in the same way.