Abstract
A method for removal of passivation polymer residues from deep reactive ion-etching (DRIE) has been systematically investigated in this study. The method combines dry oxygen plasma ashing and conventional photoresist wet stripping. Samples were carefully examined by x-ray photoelectron spectroscopy (XPS), energy-dispersive x-ray spectroscopy (EDX), and study of surface morphology. XPS and EDX analysis showed that the polymer residues consisted mainly of C-O, CF x (x = 1, 2, 3), and C-CF bonds. Optimized oxygen plasma ashing effectively removes most of the fluorocarbon content, except some nano-residues. Subsequent conventional wet stripping in organic solvents could eliminate these stubborn nanoparticles while dissolving the underlying photoresist. Excellent removal is apparent from scanning electron microscopy images. The fluorine content determined by EDX analysis showed that the residues were completely removed. The metal layers, oxide insulator layers, and the polyimide insulators function well after this critical surface treatment. The excellent results show this is an outstanding method for removal of DRIE passivation polymer residues for MEMS fabrication.
Similar content being viewed by others
References
E.H. Klaassen, K. Petersen, J.M. Noworolski, J. Logan, N.I. Maluf, J. Brown, C. Storment, W. McCulley, and G.T.A. Kovacs, Sens. Actuator A A52, 132 (1996).
A.A. Ayon, R. Braff, C.C. Lin, H.H. Sawin, and M.A. Schmidt, J. Electrochem. Soc. 146, 339 (1999).
F. Marty, L. Rousseau, B. Saadany, B. Mercier, O. Francais, Y. Mita, and T. Bourouina, Microelectron. J. 36, 673 (2005).
B.V. Amini and F. Ayazi, J. Micromech. Microeng. 15, 2113 (2005).
S.J. Fonash, J. Electrochem. Soc. 137, 3885 (1990).
T. Maruyama, N. Fujiwara, K. Siozawa, and M. Yoneda, Jpn. J. Appl. Phys. 35, 2463 (1996).
Y. Wang, S.W. Graham, L. Chan, and S.T. Loong, J. Electrochem. Soc. 144, 1522 (1997).
J.A.G. Baggerman, R.J. Visser, and E.J.H. Collart, J. Appl. Phys. 75, 758 (1994).
S.B. Kim, H. Seo, Y. Kim, H. Jeon, J. Song, H. Soh, and Y.C. Kim, J. Korean Phys. Soc. 41, 247 (2002).
T.L. Alford, Y.L. Zou, K.S. Gadre, C. King, W. Chen, and D.N. Theodore, J. Vac. Sci. Technol. B 19, 774 (2001).
K. Fukuka and M. Ueda, Polym. J. 40, 281 (2008).
J.S. Jiang and B.S. Chiou, J. Mater. Sci: Mater. Electron. 12, 655 (2001).
M.E. Grady, P.H. Geubelle, and N.R. Sottos, Thin Solid Films 552, 116 (2014).
S.G.J. Coulm, D. Leonard, and F. Bessueille, Appl. Surf. Sci. 307, 716 (2014).
S.B. Kim and H. Jeon, J. Korean Phys. Soc. 49, 1991 (2006).
S. Yun, M. Wilcoxson, J. Zhu, K. Chuang, H.W. Chang, and D. Lou, Method of post etch polymer residue removal, US20120115332 A1, 2012.
Y. C. Lee, M.B. Rao, G. Banerjee, W.D. Liu, A. Wu, and S. Inaoka, Cleaning formulations, US20140109931 A1, 2014.
R. Mellies, Aqueous solution for removing post-etch residue, US 7919445 B2, 2011.
H. Hayashi, S. Morishita, T. Tatsumi, Y. Hikosaka, S. Noda, H. Nakagawa, S. Kobayashi, M. Inoue, and T. Hoshino, J. Vac. Sci. Technol. B 17, 2557 (1999).
G.J. Coyle Jr and G.S. Oehrlein, Appl. Phys. Lett. 47, 604 (1985).
J.P. Simko, G.S. Oehrlein, and T.M. Mayer, J. Electrochem. Soc. 138, 277 (1991).
M.W. Denhoff and M. Gao, J. Electron. Mater. 26, 941 (1997).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wu, W., Zhu, T., Liu, J. et al. Polyimide-Damage-Free, CMOS-Compatible Removal of Polymer Residues from Deep Reactive Ion Etching Passivation. J. Electron. Mater. 44, 991–998 (2015). https://doi.org/10.1007/s11664-014-3604-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-014-3604-5