Abstract
Various reaction temperatures have been investigated to stabilize the CoSb3 phase obtained by a modified polyol process using a refluxing condenser. The resulting powders were cold-pressed and sintered in an evacuated-and- encapsulated ampoule for transport measurements. Single-phase CoSb3 could be produced for the reaction carried out at 448 K for a short duration of 15 min followed by evacuated-and-encapsulated sintering at 848 K for 5 h. In comparison with the sample sintered at 798 K, the sample sintered at 848 K exhibits lower resistivity and thermopower. Due to the sign crossover of the thermopower, the latter sample shows lower power factor for temperatures above 475 K.
Similar content being viewed by others
References
M.S. Toprak, and C. Stiewe, et al., Adv. Funct. Mater. 14, 1189 (2004).
T. Kyratsi, and J.S. Dyck, et al., J. Appl. Phys. 92, 965 (2002).
C. Uher, Recent Trends in Thermoelectric Materials Research I, Semiconductors and Semimetals, Vol. 69, ed. T.M. Tritt (San Diego: Academic, 2001), p. 139.
G.S. Nolas, D.T. Morelli, and T.M. Tritt, Annu. Rev. Mater. Sci. 29, 89 (1999).
Y. Zhu, H. Shen, L. Zuo, and H. Guan, J. Solid State Commun. 151, 1388 (2011).
W.-S. Liu, B.-P. Zhang, J.-F. Li, and L.-D. Zhao, J. Phys. D Appl. Phys. 40, 6784 (2007).
K. Koga, K. Akai, K. Oshiro, and M. Matsuura, Phys. Rev. B 71, 155119 (2005).
J.L. Mi, X.B. Zhao, T.J. Zhu, and J.P. Tu, J. Appl. Phys. Lett. 91, 172116 (2007).
J.L. Mi, X.B. Zhao, T.J. Zhu, J.P. Tu, and G.S. Cao, J. Alloys Compd. 417, 269 (2006).
D. Li, K. Yang, H.H. Hng, Q.Y. Yan, J. Ma, T.J. Zhu, and X.B. Zhao, J. Phys. D Appl. Phys. 42, 105408 (2009).
A. Harnwunggmoung, K. Kurosaki, Y. Ohishi, H. Muta, and S. Yamanaka, J. Alloys Compd. 509, 1084 (2011).
W.-S. Liu, Bo-Ping Zhang, Jing-Feng Li and Li-Dong Zhao. J. Phys. D Appl. Phys. 40, 566 (2007).
L. Yang, H.H. Hng, H. Cheng, T. Sun, and J. Ma, J. Mater. Lett. 62, 2483 (2008).
C.-J. Liu, L.-C. Huang, and J.-S. Wang, Appl. Phys. Lett. 89, 204102 (2006).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gharleghi, A., Chang, HZ., Chen, YC. et al. Fabrication and Thermoelectric Power Factor of CoSb3 Prepared using Modified Polyol Process and Evacuated- and-Encapsulated Sintering. J. Electron. Mater. 42, 1564–1567 (2013). https://doi.org/10.1007/s11664-012-2322-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-012-2322-0