Abstract
n-Type Si-Ge thermoelectric alloys were prepared using a melt spinning (MS) process, and then the microstructures of the samples were investigated. The alloys studied were ribbon shaped with a thickness of about 30 μm. Scanning electron microscopy (SEM) along with energy-dispersive spectrometry (EDS) and x-ray diffraction (XRD) showed a predictable, homogeneous, fine-grained microstructure at the high cooling rate, different from those of samples created by slow solidification (SS).
Similar content being viewed by others
References
C. Wood, Rep. Prog. Phys. 51, 459 (1988).
J.P. Dismukes and L. Ekstrom, Trans. Met. Soc. AIME 233, 672 (1965).
D.F. Bliss, B.G. Demczyk and J. Bailey, US Patent 6,143,070 (2000).
A. Barz, P. Dold, U. Kerat, S. Recha, K.W. Benz, M. Franz, and K. Pressel, J. Vac. Sci. Technol. B 16, 1627 (1998).
J.P. Dismukes, L. Ekstrom, E.F. Steigmeier, I. Kudman, and D.S. Beers, J. Appl. Phys. 35, 2899 (1964).
N.V. Abrosimov, S.N. Rossolenko, W. Schroder, A. Gerhardt, and W. Thieme, J. Cryst. Growth 174, 182 (1997).
I. Yonenaga, J. Cryst. Growth 275, 91 (2005).
T.S. Kim and B.S. Chun, J. Alloys Compd. 437, 225 (2007).
E. Koukharenkko, N. Frety, G. Nabias, V.G. Shepelevich, and J.C. Tedenac, J. Cryst. Growth 209, 773 (2000).
X.B. Zhao, H.Y. Chen, E. Muller, and C. Drasar, J. Alloys Compd. 365, 206 (2004).
H. Li, X.F. Tang, X.L. Su, Q.J. Zhang, and C. Uher, J. Phys. D: Appl. 42, 14 (2009).
Q. Li, Z.W. Lin, and J. Zhou, J. Electron. Mater. 38, 7 (2009).
H. Nagai, Y. Nakata, H. Minagawa, K. Kamada, T. Tsurue, M. Sasamori, and T. Okutani, Jpn. J. Appl. Phys. 41, 749 (2002).
N.A. Ahmad, A.A. Wheeler, W.J. Boettinger, and G.B. McFadden, Phys. Rev. E 58, 3436 (1998).
D.M. Rowe and V.S. Shukla, J. Appl. Phys. 52, 7421 (1981).
M.J. Aziz, J. Appl. Phys. 53, 1158 (1982).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, P., Wang, Z., Chen, H. et al. Effect of Cooling Rate on Microstructural Homogeneity and Grain Size of n-Type Si-Ge Thermoelectric Alloy by Melt Spinning. J. Electron. Mater. 39, 2251–2254 (2010). https://doi.org/10.1007/s11664-010-1314-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-010-1314-1