Abstract
There have been long debates about the environment conscious (ECO) Mg technology which utilizes CaO to produce Ca-containing Mg alloys. Two key process technologies of the ECO-Mg process are the chemical reduction of CaO by liquid Mg and the maintenance of melt cleanliness during the alloying of Ca. Thermodynamic calculations using FactSage software were performed to explain these two key issues. In addition, an experimental study was performed to compare the melt cleanliness of the Ca-containing Mg alloys produced by the conventional route with metallic Ca and the ECO-Mg route with CaO.
Similar content being viewed by others
References
S.K. Kim, and J.K. Lee: Magnesium Alloy and Manufacturing Method Thereof, WO 2010032893 A1 2010.
I.-H. Jung, S. Cui, J.-K. Lee and S.-M. Park: JOM, 2014, vol. 65, pp. 1310-1316.
FactSage software, www.factsage.com.
Pandat software, www.computherm.com.
Thermo-calc software, www.thermocalc.com.
C.W. Bale, E. Belisle, P. Chartrand, S.A. Decterov, G. Eriksson, K. Hack, I.-H. Jung, Y.-B. Kang, J. Melancon, A.D. Pelton, C. Robelin, and S. Petersen: Calphad, 2009, vol. 33, pp. 295-311.
J. Jeong, J. Im, K. Song, M. Kwon, S.K. Kim, Y.-B. Kang, and S.H. Oh: Acta Mater., 2013, vol. 61, pp. 3267-3277.
P.A. Anctil: Thermodynamic database of the Ca-Mg system, Internal report, Centre de Recherche en Calcul Thermochimique, Ecole Polytechnique de Montreal, Canada, 2003.
J. Wang: Experimental and thermodynamic study on the Mg-X (X: Ag, Ca, In, Li, Na, Sn, Sr and Zn) multicomponent systems, PhD thesis, Ecole Polytechnique de Montreal, Canada, 2014.
P.J. Spencer, A.D. Pelton, Y.B. Kang, P. Chartrand, and C.D. Fuerst: Calphad, 2008, vol. 32, pp. 423-431.
P. Wu, G. Eriksson and A.D. Pelton: J. Am. Ceram. Soc., 1993, vol. 76, pp. 2065-2075.
B. Wiese, C.L. Mendis, D. Tolnai, A. Stark, N. Schell, H.-P. Reichel, R. Brückner, K.U. Kainer, and N. Hort: J. Alloy Comp., 2015, vol. 618, pp. 64-66.
K. Kondoh, J. Fujita, J. Umeda, H. Imai, K. Enami, M. Ohara and T. Igarashi: Mater. Chem. Phys., 2011, vol. 129, pp. 631-640.
H. Westengen, and T. K. Aune: Magnesium Technology: Metallurgy, Design Data, Automotive Applications, H. Friedrich et al., ed., Springer, Berlin/Heidelberg, 2006, pp. 145–204.
N.-S. Kim, S.-H. Ha, Y.-O. Yoon, G.-Y. Yeon, H.K. Lim, and S.K. Kim: Light Metals 2013, B. Sadler, ed., TMS, 2013, pp. 453–56.
E. Aghion, B. Bornfin, F. Von Buch, S. Schumann, and H. Friedrich: JOM, 2003, Vol. 55, No. 11, pp. 30–33.
J.K. Lee, S.H. Ha, Y.J. Kim, H.H. Jo, S.K. Kim: Proc. 2 nd Asian Symp. Magnesium Alloys, 2007, pp. 130–31.
P. Bakke, K. Pettersen, S. Guldberg, and S. Sannes: Proc. 7th Int. Conf. on Magnesium Alloys and Their Applications, Wiley-VCH, 2006, pp. 739–45.
J.-H. Seo and S.K. Kim: Materials Science Forum, 2009, vol. 620-622, pp. 291-294.
Acknowledgments
This research was supported by the NSERC Discovery Grant No. 356296 CANADA, and International Collaboration Project of KITECH, KOREA in 2011.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted June 2, 2016.
Rights and permissions
About this article
Cite this article
Jung, IH., Lee, J.K. & Kim, S.K. Mg-Ca Alloys Produced by Reduction of CaO: Understanding of ECO-Mg Alloy Production. Metall Mater Trans B 48, 1073–1078 (2017). https://doi.org/10.1007/s11663-016-0875-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11663-016-0875-7