Abstract
In this work, the influence of the particle size of nickel and titanium on the synthesis of NiTi shape memory alloy by self-propagating high-temperature synthesis (SHS) was investigated. It was found that coarse titanium and nickel powders undergo only a limited SHS reaction. On the other hand, too fine powders support the low-temperature diffusional formation of NiTi intermetallics at 773 K to 1073 K (500 °C to 800 °C) which could then suppress the SHS reaction. The optimum powder fraction of both nickel and titanium to achieve the most intensive SHS reaction is 25 to 45 µm. The influence of the particle size of both nickel and titanium on the reaction mechanism is discussed in terms of the microstructure evolution, phase, and chemical composition changes and thermal effects determined by differential thermal analysis.
Similar content being viewed by others
References
C. M. Wayman; K. Shimizu: Mater. Sci. Technol., 1972, vol. 6, pp. 175-183.
H.C. Ling, R. Kaplow: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 77-83.
S. A. Thompson: Int. Endod. J., 2000, vol. 33, pp. 297–310.
Kanjwal K, R. Yeasting, C. Baptista, H. Elsamaloty, M. Sheikh, M. Elahinia, et al.: J. Interv. Card. Electrophysiol., 2011, vol. 30, pp. 45–53.
D. Vojtěch, M. Voděrová, J. Kubásek, P. Novák, P. Šedá, A. Michalcová, J. Fojt, J. Hanuš, O. Mestek: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2011, vol. 528, pp. 1864-1876.
M. Elahinia, H. Ashrafiuon: J. Vib. Acoust.-Trans. ASME, 2002, vol. 124, pp. 566–575.
S.K. Sadrnezhaad, S.B. Raz: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 395-403.
M.H. Elahinia, M. Hashemi, M.Tabesh, S.B. Bhaduri: Prog. Mater. Sci., 2012, vol. 57, pp. 911-946.
A. Foroozmehr, A. Kermanpur, F. Ashrafizadeh, Y. Kabiri: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2011, vol. 528, pp. 7952-7955.
L. Krone, E. Schüller, M. Bram, O. Hamed, H.-P. Buchkremer, D. Stöver: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2004, vol. 378, pp. 185–190.
J. A. Sago, M.W. Broadley, J. K. Eckert: Int. J. Powder Metall., 2012, vol. 48, pp. 41-49.
B.V. Krishna, S. Bose, A. Brandyopadhyay: Metall. Mater. Trans. B, 2007, vol. 38A, pp. 1096-1103,
A. Biswas, S. K. Roy: Acta Mater., 2004, vol. 52, pp. 257-270.
Y. Suzuki, H. Unuma: US Patent 4,719,077, 1988.
M. Whitney, S.F. Corbin, R.B. Gorbet: Acta Mater., 2008, vol. 56, pp. 559–570.
P. Novák, P. Pokorný, V. Vojtěch, A. Knaislová, A. Školáková, J. Čapek, M. Karlík, J. Kopeček: Mater. Chem. Phys., 2015, vol. 155, pp. 113-121.
P. Novák, L. Mejzlíková, A. Michalcová, J. Čapek, P. Beran, D. Vojtěch: Intermetallics, 2013, vol. 42, pp. 85-91.
M. Whitney, S.F. Corbin, R.B. Gorbet: Intermetallics, 2009, vol. 17, pp. 894–906.
M.V. Nevitt: Trans. TMS-AIME, 1960, vol. 218, pp. 327-331.
A. Michalcová, P. Svobodová, R. Nováková, A. Len, O. Heczko, D. Vojtěch, I. Marek, P. Novák: Mater. Lett., 2014, vol. 137, pp. 221–224.
T. Duerig, A. Pelton, Ch. Trepanier: Nitinol—PART I Mechanisms and Behavior, SMST e-Elastic Newsletter, ASM International (2011).
Acknowledgment
This research was financially supported by Czech Science Foundation, project No. 14-03044S.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted August 5, 2015.
Rights and permissions
About this article
Cite this article
Novák, P., Veselý, T., Marek, I. et al. Effect of Particle Size of Titanium and Nickel on the Synthesis of NiTi by TE-SHS. Metall Mater Trans B 47, 932–938 (2016). https://doi.org/10.1007/s11663-016-0589-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11663-016-0589-x